Thanks Rajesh!
For your prompt and detailed reply.
Now I have done whatever you spoken in this mail.
Let me tell you few things...
1. /dev/ttyW0 to /dev/ttyW31 are present already!
2. I do have specialix card at 0xe800 at irq=10, means specialix card is
detected successfully!
3. Redhat 7.2 does't seems to come with getty instead it is mgetty.
So i have changed
W0:23:respawn:/sbin/mgetty ttyW0 DT9600 vt100
W1:23:respawn:/sbin/mgetty ttyW1 DT9600 vt100
W2:23:respawn:/sbin/mgetty ttyW2 DT9600 vt100
W3:23:respawn:/sbin/mgetty ttyW3 DT9600 vt100
W4:23:respawn:/sbin/mgetty ttyW4 DT9600 vt100
W5:23:respawn:/sbin/mgetty ttyW5 DT9600 vt100
W6:23:respawn:/sbin/mgetty ttyW6 DT9600 vt100
W7:23:respawn:/sbin/mgetty ttyW7 DT9600 vt100
accordingly to my /etc/inittab
is this OK ? or what needs to be done ?
Here my problem is HOW to make the connection and by which mean.
Some one has suggested to have cross wire RJ12 to RJ45.
My problem is where to connect that RJ45 ? Means directly to some hosts
NIC...or There is also one convertor of RJ45 to 9 pin that
can directly go to serial port of my another linux m/c.
And will i be able to connect through minicom without any settings etc at
this m/c to server.
Please Help
Regards
-Yash
Rajesh Fowkar wrote:
> Hi Yashpal,
>
> We send mails from our office directly without smarthost. lih mailing list
> at sourceforge does not accept mails directly from dial-up users. Hence I
> am sending this mail directly to you.
>
> We in our office are using specialix card for dumb terminals.
>
> Just make sure that you have got the ttyW0....to....ttyW7 devices in your
> /dev. If you don't see these devices than create this small script :
>
> for i in 0 1 2 3 4 5 6 7
> do
> echo -n "$i"
> mknod /dev/ttyW$i c 75 $i
> done
> echo " "
>
> and run it as root. All the required devices will be created in /dev.
>
> Now add the following in your inittab :
>
> W0:23:respawn:/sbin/getty ttyW0 DT9600 vt100
> W1:23:respawn:/sbin/getty ttyW1 DT9600 vt100
> W2:23:respawn:/sbin/getty ttyW2 DT9600 vt100
> W3:23:respawn:/sbin/getty ttyW3 DT9600 vt100
> W4:23:respawn:/sbin/getty ttyW4 DT9600 vt100
> W5:23:respawn:/sbin/getty ttyW5 DT9600 vt100
> W6:23:respawn:/sbin/getty ttyW6 DT9600 vt100
> W7:23:respawn:/sbin/getty ttyW7 DT9600 vt100
>
> I am assuming that getty is installed on your machine.
>
> type init q and it should work. It works here for me. No problems. We are
> using this stuff for last 1 and half years.
>
> ps.: please forward this mail to LIH too so that it goes in the archives.
>
> Peace
>
> --
> Rajesh
> :
> ####[ Linux One Stanza Tip (LOST) ]###########################
>
> Sub : Sound file conversion LOST #053
>
> To convert a sound file from one format to another like .mid
> to .wav or .au, use the sox utility. man sox for details.
>
> ####<[EMAIL PROTECTED]>###################################
> :
--
Yashpal Nagar
Sys admin
Delhicall Centres GGN
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help
