-----Original Message-----
From: L.V.Gandhi <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Sunday, October 24, 1999 6:51 AM
Subject: Re: [LI] Remote login problem
|Kindly tell me how did you find out receiving mode is for fax only. I
|checked the mgetty.config log. I didn't find any separate section for
|data or fax. Onle global section only.
|betacomp wrote:
|>
|> Your modem is in receiving mode for fax only and not data.
|> Check configuration files in /etc/mgetty
|> Best Regards,
|
|> |extract of mgetty.log.ttyS1.
|> |10/21 08:57:19 yS1 mdm_send: 'AT+FCLASS=2' -> OK
|> |10/21 08:57:19 yS1 mdm_send: 'AT+FCLASS=0' -> OK
|> |10/21 08:57:19 yS1 mdm_send: 'AT+FAA=1;+FCR=1' -> OK
|> |10/21 08:57:20 yS1 mdm_send: 'AT+FBOR=0' -> OK
|> |10/21 08:57:20 yS1 mdm_send: 'AT+FLID="553169"' -> OK
|> |10/21 08:57:20 yS1 mdm_send: 'AT+FDCC=1,5,0,2,0,0,0,0' -> OK
|> |10/21 08:57:20 yS1 waiting...
|> |10/21 08:58:29 yS1 waiting for `RING'' ** found **
|> |10/21 08:58:29 yS1 waiting for `RING'' ** found **
|> |10/21 08:58:32 yS1 waiting for `RING'' ** found **
|> |10/21 08:58:35 yS1 waiting for `RING'' ** found **
The AT commands in your log file are related to fax only.
The default behavior of mgetty is to look for fax first and then switch to
data mode.
In vgetty it is voice, fax, data. It is set in voice.conf file.
Check your log file and which configuration file is being read when mgetty
receives the ring.
Best Regards,
-mukund
http://members.theglobe.com/betacomp/index.htm
http://members.xoom.com/BETACOMP/index1.htm
--------------------------------------------------------------------
The Linux India Mailing List Archives are now available. Please search
the archive at http://lists.linux-india.org/ before posting your question
to avoid repetition and save bandwidth.
