Hi Sharad Joshi
Please find the output of the ifconfig below:
eth0 Link encap:Ethernet HWaddr 00:04:AC:A6:EC:50
inet addr:192.168.1.27 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MTU:1500 Metric:1
RX packets:8 errors:1 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:11 Base address:0x7c60
The machine was able to obtain an IP address from a DHCP server. The IP
address seen above is obtained from a DHCP server. The machine hangs even
when it is pinged from another machine in the same network.
The output of lsmod is:
Module Size Used by
ip_masq_vdolive 1104 0 (unused)
ip_masq_user 2376 0 (unused)
ip_masq_raudio 2672 0 (unused)
ip_masq_quake 1092 0 (unused)
ip_masq_irc 1328 0 (unused)
ip_masq_ftp 2352 0 (unused)
ip_masq_cuseeme 816 0 (unused)
eepro100 11888 1 (autoclean)
As you can see the card if an Intel Ether Express Pro 10/100 card. It works
fine with NT running on the same machine in another partition.
U were talking of madi! What is it? Can u explain the steps in brief?
TIA
Ramakrishna
--------------------------------------------------------------------
The Linux India Mailing List Archives are now available. Please search
the archive at http://lists.linux-india.org/ before posting your question
to avoid repetition and save bandwidth.
