> OK, I've got the phone and IrCOMM works like a dream! But what I need to do
> to make it connect with the Nserver? Do I need to just enable IR connection
> in the phone?
*** Since you've got IrCOMM working the only thing you need to do is to
compile Nserver with /dev/ircomm and 19200 (or whatever - I see no reason
why not go for a higher speed) in the Makefile. For higher speed you may
need to patch it - but that's easy enough...
Then on the 9110 press the BLUE "System" button and choose Backup/Restore
from the menu. Once you start the Backup appliication choose Settings.
Make sure Connection type is set for Infrared, Path is set to C:\NSERVER,
and Data Group says All Data. Close Settings and press Backup button and
follow prompts.
Make sure you read the README for NServer as it explains how to run it.
Most importantly, nserver will create the backup files in the directory
from which you run it - so make sure you start from an empty directory...
If things break (i.e. nserver doesn't work) there is a debug=0 line in
nserver.c (close to begining of the file) which you can change to 1 or
higher to gain more detailed output of what is going on.
Hope this helps,
--Nino
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
