Hi all, I managed to put my Compaq Armada m300 with fir. I had to hard wire the io addresses into the driver �cos I don�t know how to do it properly. The machine has a SMC37n972 which telling by the datasheets is quite similar to the 37n58x series. It is similar enough to be put to work with the current smc driver. One of the differences is that the 37n972 allows the BIOS to change it default configuration port at boot. While by default it is at 370 or 3F0, in this machine after boot it is no longer there and so I was unable to detect it as well as configure/check the sir and fir io base. To make it work I checked the sir and fir bases in windows, bypassed the probe in the driver and hard wired ports 100 and 3e8. The point is that I don�t have a clue of what�s going on here with the chip. Where has the chip been mapped into? Where is the configuration port? Where is this chip, since I can�t find it in the PCI bus nor with pnp tools. Can someone explain me what�s behind the scenes? Thanks, Rui -- ------------------------------------------------------------ Rui Oliveira DI - Universidade Minho [EMAIL PROTECTED] Braga (Portugal) http://www.di.uminho.pt/~rco _______________________________________________ Linux-IrDA mailing list - [EMAIL PROTECTED] http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
