Hello,
I'm a working on getting my Vaio PCG-C1XS Picture book to sync my
Palm pilot via IR. I'm running RedHat 7.0
(kernel 6.2.2-16) with IRDA included as modules (in particular
nsc-ircc.o is available). I put
alias tty-ldisc-11 irtty
alias char-major-161 ircomm-tty
options nsc-ircc dongle_id=0x09
alias irda nsc-ircc
in my modules.conf file.
findchip reports
reg=0x000
Found NSC PC87338 Controller at 0x398, DevID=0x0b, Rev. 2
SIR Base 0x3f8, FIR Base 0x3f8
IRQ = 10, DMA = 0
Enabled: yes, Suspended: no
UART compatible: yes
Half duplex delay = 0 us
This looks like a pretty standard set up according to what I have seen
in the email archives. My question:
when I do either a "irattach irda -s"
or an "ifconfig irda up"
I get
nsc-ircc, Wrong chip version ff
Has anyone seen anything like this? Any help would be appreciated. I'm
using irdautils 0.9.13. The code
for the nsc-ircc driver indicates that is was last modified April 25,
2000.
Thank you
j
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
