Ack typo! I'm running 2.2.16-22. Seems I got my version numbers mixed up.
sorry.
Any hints greatly appreciated.
thanks
j.
[EMAIL PROTECTED] wrote:
> Hello,
> I'm a working on getting my Vaio PCG-C1XS Picture book to sync my
> Palm pilot via IR. I'm running RedHat 7.0
> (kernel 6.2.2-16) with IRDA included as modules (in particular
> nsc-ircc.o is available). I put
>
> alias tty-ldisc-11 irtty
> alias char-major-161 ircomm-tty
> options nsc-ircc dongle_id=0x09
> alias irda nsc-ircc
>
> in my modules.conf file.
>
> findchip reports
>
> reg=0x000
> Found NSC PC87338 Controller at 0x398, DevID=0x0b, Rev. 2
> SIR Base 0x3f8, FIR Base 0x3f8
> IRQ = 10, DMA = 0
> Enabled: yes, Suspended: no
> UART compatible: yes
> Half duplex delay = 0 us
>
> This looks like a pretty standard set up according to what I have seen
> in the email archives. My question:
>
> when I do either a "irattach irda -s"
>
> or an "ifconfig irda up"
>
> I get
>
> nsc-ircc, Wrong chip version ff
>
> Has anyone seen anything like this? Any help would be appreciated. I'm
> using irdautils 0.9.13. The code
> for the nsc-ircc driver indicates that is was last modified April 25,
> 2000.
>
> Thank you
> j
>
> _______________________________________________
> Linux-IrDA mailing list - [EMAIL PROTECTED]
> http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
