Le Tue, 06 Mar 2007 16:54:41 -0500, "Bob Copeland" <[EMAIL PROTECTED]> a écrit :
> > > > My karma won't boot anymore ! The boot starts (Rio symbol rotating) > > then it shuts off and on and off and on forever. I can only stop the > > cycle by using the paper clip. > > Congratulations, you get to be the first person to try recovery > mode! :) Lucky me... > root cause: > > riocp(lk_karmaUsb_load_database_smalldb+0x40)[0x8052038] > > hmm... load_database probably failed because of a corrupt database. > > Busted Karma Recovery Guide (use when Karma repeatedly reboots) > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > NOTE be sure to use the right device name below - don't write an OMFS > fs on your computer's hard drive. OK > 1) See if there were any oops messages or omfs related messages in > your dmesg, for fixing this in the future, and let us know what you > find. > 2) Apply the patch in this email and rebuild your kernel: > http://marc.theaimsgroup.com/?l=linux-karma-devel&m=116982412810588&w=2 Will do, as soon as I get some time > 3) Reboot your computer then start the Karma in recovery mode (hold > the silver button while you power the device on). Tried that already > 4) Check dmesg to see if the disk is detected ("sda1 sda2" etc). Do > not mount the partitions -- if your computer automounts the Karma, > manually unmount the disk. the disk is detected but I get errors : [17226686.184000] usb 1-2: new full speed USB device using ohci_hcd and address 16 [17226686.384000] usb 1-2: not running at top speed; connect to a high speed hub [17226686.400000] usb 1-2: configuration #1 chosen from 1 choice [17226689.492000] usb-storage: probe of 1-2:1.0 failed with error 1 so, no /dev/sda* are created > 5) Download this file: > http://bobcopeland.com/karma/misc/blank_karma_img.bz2 > > 6) Using the proper device name in place of sda, do: > $ sudo bzcat blank_karma_img.bz2 > /dev/sda2 I guess I won't be able to do that, is it hopeless ? > 7) Restart the Karma in normal mode and reload your music. I wish :-( > Steps 2-6 may also be accomplished by using the firmware uploader > under Windows and clicking the checkbox to format disk. I tried but the karma isn't detected by the firmware uploader. Thanks for your help. ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ linux-karma-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/linux-karma-devel
