On 2015/10/21 1:25, Mark Rutland wrote: > On Tue, Oct 20, 2015 at 11:44:46AM -0500, Brijesh Singh wrote: >> Hi Mark, >> >> Thanks for review. >> >> -Brijesh >> >> On 10/19/2015 03:52 PM, Mark Rutland wrote: >>> Hi, >>> >>> Please Cc the devicetree list (devicet...@vger.kernel.org) when sending >>> binding patches. I see you've added the people from the MAINTAINERS >>> entry; the list should also be Cc'd. >>> >> Noted. >>> On Mon, Oct 19, 2015 at 02:23:17PM -0500, Brijesh Singh wrote: >>>> Add support for the AMD Seattle SoC EDAC driver. >>>> >>>> Signed-off-by: Brijesh Singh <brijeshkumar.si...@amd.com> >>>> --- >>>> .../devicetree/bindings/edac/amd-seattle-edac.txt | 15 + >>>> drivers/edac/Kconfig | 6 + >>>> drivers/edac/Makefile | 1 + >>>> drivers/edac/seattle_edac.c | 306 >>>> +++++++++++++++++++++ >>>> 4 files changed, 328 insertions(+) >>>> create mode 100644 >>>> Documentation/devicetree/bindings/edac/amd-seattle-edac.txt >>>> create mode 100644 drivers/edac/seattle_edac.c >>>> >>>> diff --git a/Documentation/devicetree/bindings/edac/amd-seattle-edac.txt >>>> b/Documentation/devicetree/bindings/edac/amd-seattle-edac.txt >>>> new file mode 100644 >>>> index 0000000..a0354e8 >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/edac/amd-seattle-edac.txt >>>> @@ -0,0 +1,15 @@ >>>> +* AMD Seattle SoC EDAC node >>>> + >>>> +EDAC node is defined to describe on-chip error detection and reporting. >>>> + >>>> +Required properties: >>>> +- compatible: Should be "amd,arm-seattle-edac" >>>> +- poll-delay-msec: Indicates how often the edac check callback should be >>>> called. >>>> + Time in msec. >>> This second property doesn't describe the hardware in any way. It should >>> be runtime-configurable and dpesn't belong in the DT. >>> >>> Regardless, the binding is wrong. This is in no way specific to AMD >>> Seattle, and per the code is actually used to imply the presence of a >>> Cortex-A57 feature. No reference to AMD Seattle belongs in the DT >>> binding (with the exception of the example, perhaps), nor in the driver. >>> >>> NAK while this pretends to be something that it isn't. At minimum, you >>> need to correctly describe the feature you are trying to add support >>> for. >>> >> I will remove AMD specific string in compatibility field and make the >> poll-delay-msec optional. Will also expose this as module parameter as >> you suggested below. > I don't think it should be optional; I don't think it should be there at > all. > > I'm not sure if we even need a DT binding if we can derive the presence > of the feature from the MIDR. > >>>> + * The driver polls CPUMERRSR_EL1 and L2MERRSR_EL1 registers to logs the >>> These are IMPLEMENTATION DEFINED registers which are specific to >>> Cortex-A57, and I note that L2MERRSR_EL1 changed in r1p0. >>> >>> Which revisions of Cortex-A57 does this work with? >>> >> I have tested my code on r1p2. >> >>> Generally we avoid touching IMPLEMENTATION DEFINED registers as they may >>> not exist in some configurations or revisions, and could trap or undef. >>> Is it always safe to access these registers (in current revisions of >>> Cortex-A57)? >>> >> So far I have not ran into any trap error, was able to read/write >> registers from EL1 all the times. I looked at TRM but could not find >> reference that it would fail. As per doc the register should be >> available at all EL's except EL0. > Ok.
This also works on Hisilicon D02 board. but the mechanism to handle the error is a little bit different, on D02, it use poll mechanism to scan the single bit ECC error just as Seattle, but D02 will trigger SEI when double bit ECC error happened. Thanks Hanjun -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
