Use the pinmux IOPAD macros to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---

 arch/arm/boot/dts/omap3-beagle.dts | 64 +++++++++++++++++++-------------------
 1 file changed, 32 insertions(+), 32 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-beagle.dts 
b/arch/arm/boot/dts/omap3-beagle.dts
index 274c2c482aaa..8dcf84ac79bb 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -171,7 +171,7 @@
 &omap3_pmx_wkup {
        gpio1_pins: pinmux_gpio1_pins {
                pinctrl-single,pins = <
-                       0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* 
sys_boot5.gpio_7 */
+                       OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | 
PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
                >;
        };
 };
@@ -195,47 +195,47 @@
 
        uart3_pins: pinmux_uart3_pins {
                pinctrl-single,pins = <
-                       0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* 
uart3_rx_irrx.uart3_rx_irrx */
-                       0x170 (PIN_OUTPUT | MUX_MODE0) /* 
uart3_tx_irtx.uart3_tx_irtx */
+                       OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | 
PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+                       OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* 
uart3_tx_irtx.uart3_tx_irtx */
                >;
        };
 
        tfp410_pins: pinmux_tfp410_pins {
                pinctrl-single,pins = <
-                       0x196 (PIN_OUTPUT | MUX_MODE4)  /* hdq_sio.gpio_170 */
+                       OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)       
/* hdq_sio.gpio_170 */
                >;
        };
 
        dss_dpi_pins: pinmux_dss_dpi_pins {
                pinctrl-single,pins = <
-                       0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-                       0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync 
*/
-                       0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync 
*/
-                       0x0aa (PIN_OUTPUT | MUX_MODE0)   /* 
dss_acbias.dss_acbias */
-                       0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 
*/
-                       0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 
*/
-                       0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 
*/
-                       0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 
*/
-                       0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 
*/
-                       0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 
*/
-                       0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 
*/
-                       0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 
*/
-                       0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 
*/
-                       0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 
*/
-                       0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data10.dss_data10 */
-                       0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data11.dss_data11 */
-                       0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data12.dss_data12 */
-                       0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data13.dss_data13 */
-                       0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data14.dss_data14 */
-                       0x0ca (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data15.dss_data15 */
-                       0x0cc (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data16.dss_data16 */
-                       0x0ce (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data17.dss_data17 */
-                       0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data18.dss_data18 */
-                       0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data19.dss_data19 */
-                       0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data20.dss_data20 */
-                       0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data21.dss_data21 */
-                       0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data22.dss_data22 */
-                       0x0da (PIN_OUTPUT | MUX_MODE0)   /* 
dss_data23.dss_data23 */
+                       OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* 
dss_pclk.dss_pclk */
+                       OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* 
dss_hsync.dss_hsync */
+                       OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* 
dss_vsync.dss_vsync */
+                       OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* 
dss_acbias.dss_acbias */
+                       OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data0.dss_data0 */
+                       OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data1.dss_data1 */
+                       OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data2.dss_data2 */
+                       OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data3.dss_data3 */
+                       OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data4.dss_data4 */
+                       OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data5.dss_data5 */
+                       OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data6.dss_data6 */
+                       OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data7.dss_data7 */
+                       OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data8.dss_data8 */
+                       OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data9.dss_data9 */
+                       OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data10.dss_data10 */
+                       OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data11.dss_data11 */
+                       OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data12.dss_data12 */
+                       OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data13.dss_data13 */
+                       OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data14.dss_data14 */
+                       OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data15.dss_data15 */
+                       OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data16.dss_data16 */
+                       OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data17.dss_data17 */
+                       OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data18.dss_data18 */
+                       OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data19.dss_data19 */
+                       OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data20.dss_data20 */
+                       OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data21.dss_data21 */
+                       OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data22.dss_data22 */
+                       OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* 
dss_data23.dss_data23 */
                >;
        };
 };
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to