Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.
Also, use the mux defines instead of magic numbers for the padconf
values when defining the pinctrl lines to make it more readable.
Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
arch/arm/boot/dts/am335x-evm.dts | 220 +++++++++++++++++++--------------------
1 file changed, 110 insertions(+), 110 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d9d00ab863a2..4caf074063fe 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -168,215 +168,215 @@
matrix_keypad_s0: matrix_keypad_s0 {
pinctrl-single,pins = <
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /*
gpmc_a5.gpio1_21 */
- 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /*
gpmc_a6.gpio1_22 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /*
gpmc_a9.gpio1_25 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /*
gpmc_a10.gpio1_26 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /*
gpmc_a11.gpio1_27 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
/* gpmc_a5.gpio1_21 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
/* gpmc_a6.gpio1_22 */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* gpmc_a9.gpio1_25 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* gpmc_a10.gpio1_26 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* gpmc_a11.gpio1_27 */
>;
};
volume_keys_s0: volume_keys_s0 {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /*
spi0_sclk.gpio0_2 */
- 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /*
spi0_d0.gpio0_3 */
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* spi0_sclk.gpio0_2 */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* spi0_d0.gpio0_3 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /*
i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /*
i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
/* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
/* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /*
spi0_d1.i2c1_sda */
- 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /*
spi0_cs0.i2c1_scl */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2)
/* spi0_d1.i2c1_sda */
+ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2)
/* spi0_cs0.i2c1_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /*
uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /*
uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
/* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
/* uart0_txd.uart0_txd */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x178 (PIN_INPUT | MUX_MODE0) /*
uart1_ctsn.uart1_ctsn */
- 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /*
uart1_rtsn.uart1_rtsn */
- 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /*
uart1_rxd.uart1_rxd */
- 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /*
uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)
/* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
/* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)
/* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
/* uart1_txd.uart1_txd */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /*
xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
/* xdma_event_intr1.clkout2 */
>;
};
nandflash_pins_s0: nandflash_pins_s0 {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /*
gpmc_wpn.gpio0_30 */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /*
gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /*
gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /*
gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /*
gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /*
gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)
/* gpmc_wpn.gpio0_30 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
/* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
/* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
/* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
/* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
/* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
- 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out
MODE0 */
+ AM33XX_IOPAD(0x964, MUX_MODE0) /*
eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /*
mii1_txen.rgmii1_tctl */
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /*
mii1_rxdv.rgmii1_rctl */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /*
mii1_txd3.rgmii1_td3 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /*
mii1_txd2.rgmii1_td2 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /*
mii1_txd1.rgmii1_td1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /*
mii1_txd0.rgmii1_td0 */
- 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /*
mii1_txclk.rgmii1_tclk */
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /*
mii1_rxclk.rgmii1_rclk */
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /*
mii1_rxd3.rgmii1_rd3 */
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /*
mii1_rxd2.rgmii1_rd2 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /*
mii1_rxd1.rgmii1_rd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /*
mii1_rxd0.rgmii1_rd0 */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
/* mii1_txen.rgmii1_tctl */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)
/* mii1_rxdv.rgmii1_rctl */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
/* mii1_txd3.rgmii1_td3 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
/* mii1_txd2.rgmii1_td2 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
/* mii1_txd1.rgmii1_td1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
/* mii1_txd0.rgmii1_td0 */
+ AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
/* mii1_txclk.rgmii1_tclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)
/* mii1_rxclk.rgmii1_rclk */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)
/* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)
/* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)
/* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)
/* mii1_rxd0.rgmii1_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
/* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)
/* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST |
MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
/* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /*
spi0_cs1.gpio0_6 */
>;
};
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
- 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /*
gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
- 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /*
gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
- 0x4C (PIN_INPUT_PULLUP | MUX_MODE3) /*
gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
- 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /*
gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
- 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /*
gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
- 0x8C (PIN_INPUT_PULLUP | MUX_MODE3) /*
gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)
/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)
/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)
/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)
/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)
/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)
/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
>;
};
wlan_pins: pinmux_wlan_pins {
pinctrl-single,pins = <
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /*
gpmc_a0.gpio1_16 */
- 0x19C (PIN_INPUT | MUX_MODE7) /*
mcasp0_ahclkr.gpio3_17 */
- 0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /*
mcasp0_ahclkx.gpio3_21 */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
/* gpmc_a0.gpio1_16 */
+ AM33XX_IOPAD(0x99c, PIN_INPUT | MUX_MODE7)
/* mcasp0_ahclkr.gpio3_17 */
+ AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
/* mcasp0_ahclkx.gpio3_21 */
>;
};
lcd_pins_s0: lcd_pins_s0 {
pinctrl-single,pins = <
- 0x20 (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad8.lcd_data23 */
- 0x24 (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad9.lcd_data22 */
- 0x28 (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad10.lcd_data21 */
- 0x2c (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad11.lcd_data20 */
- 0x30 (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad12.lcd_data19 */
- 0x34 (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad13.lcd_data18 */
- 0x38 (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad14.lcd_data17 */
- 0x3c (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad15.lcd_data16 */
- 0xa0 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data0.lcd_data0 */
- 0xa4 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data1.lcd_data1 */
- 0xa8 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data2.lcd_data2 */
- 0xac (PIN_OUTPUT | MUX_MODE0) /*
lcd_data3.lcd_data3 */
- 0xb0 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data4.lcd_data4 */
- 0xb4 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data5.lcd_data5 */
- 0xb8 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data6.lcd_data6 */
- 0xbc (PIN_OUTPUT | MUX_MODE0) /*
lcd_data7.lcd_data7 */
- 0xc0 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data8.lcd_data8 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data9.lcd_data9 */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data10.lcd_data10 */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /*
lcd_data11.lcd_data11 */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data12.lcd_data12 */
- 0xd4 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data13.lcd_data13 */
- 0xd8 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data14.lcd_data14 */
- 0xdc (PIN_OUTPUT | MUX_MODE0) /*
lcd_data15.lcd_data15 */
- 0xe0 (PIN_OUTPUT | MUX_MODE0) /*
lcd_vsync.lcd_vsync */
- 0xe4 (PIN_OUTPUT | MUX_MODE0) /*
lcd_hsync.lcd_hsync */
- 0xe8 (PIN_OUTPUT | MUX_MODE0) /*
lcd_pclk.lcd_pclk */
- 0xec (PIN_OUTPUT | MUX_MODE0) /*
lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)
/* gpmc_ad8.lcd_data23 */
+ AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
/* gpmc_ad9.lcd_data22 */
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
/* gpmc_ad10.lcd_data21 */
+ AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
/* gpmc_ad11.lcd_data20 */
+ AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
/* gpmc_ad12.lcd_data19 */
+ AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
/* gpmc_ad13.lcd_data18 */
+ AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
/* gpmc_ad14.lcd_data17 */
+ AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)
/* gpmc_ad15.lcd_data16 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)
/* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
/* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
/* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
/* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
/* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
/* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
/* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
/* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
/* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
/* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
/* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
/* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
/* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
/* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
/* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)
/* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)
/* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)
/* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)
/* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)
/* lcd_ac_bias_en.lcd_ac_bias_en */
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /*
mii1_crs.mcasp1_aclkx */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /*
mii1_rxerr.mcasp1_fsx */
- 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /*
mii1_col.mcasp1_axr2 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /*
rmii1_ref_clk.mcasp1_axr3 */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /*
mii1_crs.mcasp1_aclkx */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /*
mii1_rxerr.mcasp1_fsx */
+ AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /*
mii1_col.mcasp1_axr2 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /*
rmii1_ref_clk.mcasp1_axr3 */
>;
};
mcasp1_pins_sleep: mcasp1_pins_sleep {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
- 0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx
*/
- 0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /*
uart0_rtsn.d_can1_rx */
+ AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /*
uart0_ctsn.d_can1_tx */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLDOWN | MUX_MODE2) /*
uart0_rtsn.d_can1_rx */
>;
};
};
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
