On 11/18/2015 11:50 PM, Vladimir Zapolskiy wrote:
Hi Cory,
On 19.11.2015 05:29, Cory Tusar wrote:
This commit implements bindings in the eeprom_93xx46 driver allowing
device word size and read-only attributes to be specified via
devicetree.
Signed-off-by: Cory Tusar <cory.tu...@pid1solutions.com>
---
drivers/misc/eeprom/eeprom_93xx46.c | 62 +++++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c
b/drivers/misc/eeprom/eeprom_93xx46.c
index e1bf0a5..1f29d9a 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -13,6 +13,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/sysfs.h>
@@ -294,12 +296,71 @@ static ssize_t eeprom_93xx46_store_erase(struct device
*dev,
}
static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase);
+#ifdef CONFIG_OF
+static const struct of_device_id eeprom_93xx46_of_table[] = {
+ { .compatible = "eeprom-93xx46", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
+
Please move this declaration closer to struct spi_driver
eeprom_93xx46_driver below.
It is referenced in the function below.
Also you can avoid #ifdef here, if you write
.of_match_table = of_match_ptr(eeprom_93xx46_of_table)
I think this is backwards, when eeprom_93xx46_of_table is #ifdef'd
off you need to use of_match_ptr so when CONFIG_OF is not defined
you wont get an undefined reference to eeprom_93xx46_of_table.
Without the #ifdef, eeprom_93xx46_of_table will always be defined
and you can just .of_match_table = eeprom_93xx46_of_table; safely.
Whenever possible please avoid #ifdef's in .c files.
+static int eeprom_93xx46_probe_dt(struct spi_device *spi)
+{
+ struct device_node *np = spi->dev.of_node;
+ struct eeprom_93xx46_platform_data *pd;
+ u32 tmp;
+ int ret;
+
+ if (!of_match_device(eeprom_93xx46_of_table, &spi->dev))
+ return 0;
+
+ pd = devm_kzalloc(&spi->dev, sizeof(*pd), GFP_KERNEL);
+ if (!pd)
+ return -ENOMEM;
+
+ ret = of_property_read_u32(np, "data-size", &tmp);
+ if (ret < 0) {
+ dev_err(&spi->dev, "data-size property not found\n");
+ goto error_free;
Because you use devm_* resource allocation in .probe, just return error.
Plus I would suggest to change "data-size" property to an optional one,
here I mean that if it is omitted, then by default consider pd->flags |=
EE_ADDR8.
+ }
+
+ if (tmp == 8) {
+ pd->flags |= EE_ADDR8;
+ } else if (tmp == 16) {
+ pd->flags |= EE_ADDR16;
+ } else {
+ dev_err(&spi->dev, "invalid data-size (%d)\n", tmp);
+ goto error_free;
Same here.
+ }
+
+ if (of_property_read_bool(np, "read-only"))
+ pd->flags |= EE_READONLY;
+
+ spi->dev.platform_data = pd;
+
+ return 1;
On success please return 0.
+error_free:
+ devm_kfree(&spi->dev, pd);
+ return ret;
+}
+
+#else
+static inline int eeprom_93xx46_probe_dt(struct spi_device *spi)
+{
+ return 0;
+}
+#endif
+
I actually don't see a point to have #ifdef CONFIG_OF here.
Usually to avoid a lot of dead code and data when OF is not enabled.
Instead please add a check for !spi->dev.of_node at the beginning of
eeprom_93xx46_probe_dt() or in .probe()
static int eeprom_93xx46_probe(struct spi_device *spi)
{
struct eeprom_93xx46_platform_data *pd;
struct eeprom_93xx46_dev *edev;
int err;
+ err = eeprom_93xx46_probe_dt(spi);
+ if (err < 0)
+ return err;
+
pd = spi->dev.platform_data;
if (!pd) {
dev_err(&spi->dev, "missing platform data\n");
@@ -370,6 +431,7 @@ static int eeprom_93xx46_remove(struct spi_device *spi)
static struct spi_driver eeprom_93xx46_driver = {
.driver = {
.name = "93xx46",
+ .of_match_table = eeprom_93xx46_of_table,
},
.probe = eeprom_93xx46_probe,
.remove = eeprom_93xx46_remove,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
