The sdhci1 on Marvell BG2Q DMP board is used as sdcard interface, we
have gpios for card detection, write-protect, vqmmc and vmmc.

This patch adds pinmux for this sdcard interface, then adds regulators
for vmmc and vqmmc, lastly adds cd-gpios, wp-gpios properties.

Signed-off-by: Jisheng Zhang <[email protected]>
---
 arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 43 ++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts 
b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index cdcf89b..1fdc1d7 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -84,12 +84,51 @@
                        gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
                        enable-active-high;
                };
+
+               reg_sdio1_vmmc: regulator@3 {
+                       compatible = "regulator-fixed";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-name = "sdio1_vmmc";
+                       enable-active-high;
+                       regulator-boot-on;
+                       gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
+               };
+
+               reg_sdio1_vqmmc: regulator@4 {
+                       compatible = "regulator-gpio";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-name = "sdio1_vqmmc";
+                       regulator-type = "voltage";
+                       enable-active-high;
+                       gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
+                       states = <3300000 0x1
+                                 1800000 0x0>;
+               };
+       };
+};
+
+&soc_pinctrl {
+       sd1gpio_pmux: sd1pwr-pmux {
+               groups = "G23", "G32";
+               function = "gpio";
+       };
+
+       sd1_pmux: sd1-pmux {
+               groups = "G31";
+               function = "sd1";
        };
 };
 
 &sdhci1 {
-       broken-cd;
-       sdhci,wp-inverted;
+       vmmc-supply = <&reg_sdio1_vmmc>;
+       vqmmc-supply = <&reg_sdio1_vqmmc>;
+       cd-inverted;
+       cd-gpios = <&portc 30 GPIO_ACTIVE_HIGH>;
+       wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
+       pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
+       pinctrl-names = "default";
        status = "okay";
 };
 
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to