Hi, Thank you for the review!
> From: Kishon Vijay Abraham I [mailto:kis...@ti.com] > Sent: Friday, November 27, 2015 2:21 PM > > Hi, > > On Tuesday 20 October 2015 02:27 PM, Yoshihiro Shimoda wrote: > > This patch adds support for R-Car generation 3 USB2 PHY driver. > > This SoC has 3 EHCI/OHCI channels, and the channel 0 is shared > > with the HSUSB (USB2.0 peripheral) device. And each channel has > > independent registers about the PHYs. > > > > So, the purpose of this driver is: > > 1) initializes some registers of SoC specific to use the > > {ehci,ohci}-platform driver. > > > > 2) detects id pin to select host or peripheral on the channel 0. > > > > For now, this driver only supports 1) above. > > When you do 2), make sure to use the extcon framework. Thank you for your proposal! I will use the extcon framework for it. > One minor comment below and then I can queue it for 4.5. Thank you! < snip > > > + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > > + if (IS_ERR(provider)) { > > + dev_err(dev, "Failed to register PHY provider\n"); > > + return PTR_ERR(provider); > > + } > > + > > + return 0; > > This can simply be replaced with return PTR_ERR_OR_ZERO(provider); Yes, I tested that this could simply be replaced with "return PTR_ERR_OR_ZERO(provider);". So, should I send v6 patch? Best regards, Yoshihiro Shimoda > Thanks > Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
