Hi, Lee
Thanks to the review,
I'll carry your Ack when I reflect Jacek's comment.
On 2015년 11월 26일 18:11, Lee Jones wrote:
> On Wed, 25 Nov 2015, Ingi Kim wrote:
>
>> This patch adds device driver of Richtek RT5033 PMIC.
>> The RT5033 Flash LED Circuit is designed for one or two LEDs driving
>> for torch and strobe applications, it provides an I2C software command
>> to trigger the torch and strobe operation.
>>
>> Each of LED outputs can contorl a separate LED sharing their setting,
>> and can be connected together for a single connected LED.
>> One LED is represented by one child node.
>>
>> Signed-off-by: Ingi Kim <ingi2....@samsung.com>
>> ---
>> drivers/leds/Kconfig | 8 +
>> drivers/leds/Makefile | 1 +
>> drivers/leds/leds-rt5033.c | 541
>> +++++++++++++++++++++++++++++++++++++
>> include/linux/mfd/rt5033-private.h | 51 ++++
>
> Acked-by: Lee Jones <lee.jo...@linaro.org>
>
>> 4 files changed, 601 insertions(+)
>> create mode 100644 drivers/leds/leds-rt5033.c
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index b1ab8bd..f41ac9b 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -345,6 +345,14 @@ config LEDS_PCA963X
>> LED driver chip accessed via the I2C bus. Supported
>> devices include PCA9633 and PCA9634
>>
>> +config LEDS_RT5033
>> + tristate "LED support for RT5033 PMIC"
>> + depends on LEDS_CLASS_FLASH && OF
>> + depends on MFD_RT5033
>> + help
>> + This option enables support for on-chip LED driver on
>> + RT5033 PMIC.
>> +
>> config LEDS_WM831X_STATUS
>> tristate "LED support for status LEDs on WM831x PMICs"
>> depends on LEDS_CLASS
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index e9d53092..77cfad5 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -23,6 +23,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE) +=
>> leds-cobalt-qube.o
>> obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
>> obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
>> obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
>> +obj-$(CONFIG_LEDS_RT5033) += leds-rt5033.o
>> obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
>> obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
>> obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
>> diff --git a/drivers/leds/leds-rt5033.c b/drivers/leds/leds-rt5033.c
>> new file mode 100644
>> index 0000000..256df74
>> --- /dev/null
>> +++ b/drivers/leds/leds-rt5033.c
>> @@ -0,0 +1,541 @@
>> +/*
>> + * led driver for RT5033
>> + *
>> + * Copyright (C) 2015 Samsung Electronics, Co., Ltd.
>> + * Ingi Kim <ingi2....@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + */
>> +
>> +#include <linux/led-class-flash.h>
>> +#include <linux/mfd/rt5033.h>
>> +#include <linux/mfd/rt5033-private.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/platform_device.h>
>> +
>> +#define RT5033_LED_FLASH_TIMEOUT_MIN 64000
>> +#define RT5033_LED_FLASH_TIMEOUT_STEP 32000
>> +#define RT5033_LED_FLASH_BRIGHTNESS_MIN 50000
>> +#define RT5033_LED_FLASH_BRIGHTNESS_MAX_1CH 600000
>> +#define RT5033_LED_FLASH_BRIGHTNESS_MAX_2CH 800000
>> +#define RT5033_LED_FLASH_BRIGHTNESS_STEP 25000
>> +#define RT5033_LED_TORCH_BRIGHTNESS_MIN 12500
>> +#define RT5033_LED_TORCH_BRIGHTNESS_STEP 12500
>> +
>> +#define FLED1_IOUT (BIT(0))
>> +#define FLED2_IOUT (BIT(1))
>> +
>> +enum rt5033_fled {
>> + FLED1,
>> + FLED2,
>> +};
>> +
>> +struct rt5033_sub_led {
>> + enum rt5033_fled fled_id;
>> + struct led_classdev_flash fled_cdev;
>> +
>> + u32 flash_brightness;
>> + u32 flash_timeout;
>> +};
>> +
>> +/* RT5033 Flash led platform data */
>> +struct rt5033_led {
>> + struct device *dev;
>> + struct mutex lock;
>> + struct regmap *regmap;
>> + struct rt5033_sub_led sub_leds[2];
>> +
>> + u32 current_flash_timeout;
>> + u32 current_flash_brightness;
>> +
>> + bool iout_joint;
>> + u8 fled_mask;
>> + u8 current_iout;
>> +};
>> +
>> +struct rt5033_led_config_data {
>> + const char *label[2];
>> + u32 flash_max_microamp[2];
>> + u32 flash_max_timeout[2];
>> + u32 torch_max_microamp[2];
>> + u32 num_leds;
>> +};
>> +
>> +static u8 rt5033_torch_brightness_to_reg(u32 ua)
>> +{
>> + return (ua - RT5033_LED_TORCH_BRIGHTNESS_MIN) /
>> + RT5033_LED_TORCH_BRIGHTNESS_STEP;
>> +}
>> +
>> +static u8 rt5033_flash_brightness_to_reg(u32 ua)
>> +{
>> + return (ua - RT5033_LED_FLASH_BRIGHTNESS_MIN) /
>> + RT5033_LED_FLASH_BRIGHTNESS_STEP;
>> +}
>> +
>> +static u8 rt5033_flash_timeout_to_reg(u32 us)
>> +{
>> + return (us - RT5033_LED_FLASH_TIMEOUT_MIN) /
>> + RT5033_LED_FLASH_TIMEOUT_STEP;
>> +}
>> +
>> +static struct rt5033_sub_led *flcdev_to_sub_led(
>> + struct led_classdev_flash *fled_cdev)
>> +{
>> + return container_of(fled_cdev, struct rt5033_sub_led, fled_cdev);
>> +}
>> +
>> +static struct rt5033_led *sub_led_to_led(struct rt5033_sub_led *sub_led)
>> +{
>> + return container_of(sub_led, struct rt5033_led,
>> + sub_leds[sub_led->fled_id]);
>> +}
>> +
>> +static bool rt5033_fled_used(struct rt5033_led *led, enum rt5033_fled
>> fled_id)
>> +{
>> + u8 fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT;
>> +
>> + return led->fled_mask & fled_bit;
>> +}
>> +
>> +static u8 rt5033_get_iout_to_set(struct rt5033_led *led,
>> + enum rt5033_fled fled_id)
>> +{
>> + u8 fled_bit;
>> +
>> + if (led->iout_joint)
>> + fled_bit = FLED1_IOUT | FLED2_IOUT;
>> + else
>> + fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT;
>> +
>> + return fled_bit;
>> +}
>> +
>> +static int rt5033_led_iout_disable(struct rt5033_led *led,
>> + enum rt5033_fled fled_id)
>> +{
>> + int ret;
>> + u8 fled_bit;
>> +
>> + fled_bit = rt5033_get_iout_to_set(led, fled_id);
>> + led->current_iout &= ~fled_bit;
>> +
>> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>> + RT5033_FLED_FUNC1_MASK,
>> + RT5033_FLED_PINCTRL | led->current_iout);
>> +
>> + return ret;
>> +}
>> +
>> +static int rt5033_set_flash_current(struct rt5033_led *led, u32 micro_amp)
>> +{
>> + u8 v;
>> + int ret;
>> +
>> + v = rt5033_flash_brightness_to_reg(micro_amp);
>> +
>> + ret = regmap_write(led->regmap, RT5033_REG_FLED_STROBE_CTRL1, v);
>> + if (ret < 0)
>> + return ret;
>> +
>> + led->current_flash_brightness = micro_amp;
>> +
>> + return 0;
>> +}
>> +
>> +static int rt5033_set_timeout(struct rt5033_led *led, u32 microsec)
>> +{
>> + u8 v;
>> + int ret;
>> +
>> + v = rt5033_flash_timeout_to_reg(microsec);
>> +
>> + ret = regmap_write(led->regmap, RT5033_REG_FLED_STROBE_CTRL2, v);
>> + if (ret < 0)
>> + return ret;
>> +
>> + led->current_flash_timeout = microsec;
>> +
>> + return 0;
>> +}
>> +
>> +static int rt5033_led_brightness_set(struct led_classdev *led_cdev,
>> + enum led_brightness brightness)
>> +{
>> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
>> + struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
>> + struct rt5033_led *led = sub_led_to_led(sub_led);
>> + int fled_id = sub_led->fled_id, ret;
>> + u8 fled_bit;
>> +
>> + mutex_lock(&led->lock);
>> +
>> + if (!brightness) {
>> + ret = rt5033_led_iout_disable(led, fled_id);
>> + goto torch_unlock;
>> + }
>> +
>> + fled_bit = rt5033_get_iout_to_set(led, fled_id);
>> +
>> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_CTRL1,
>> + RT5033_FLED_CTRL1_MASK, (brightness - 1) << 4);
>> + if (ret < 0)
>> + goto torch_unlock;
>> +
>> + if (led->current_iout != fled_bit) {
>> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>> + RT5033_FLED_FUNC1_MASK,
>> + RT5033_FLED_PINCTRL | fled_bit);
>> + if (ret < 0)
>> + goto torch_unlock;
>> + led->current_iout = fled_bit;
>> + }
>> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
>> + RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED);
>> +
>> +torch_unlock:
>> + mutex_unlock(&led->lock);
>> + return ret;
>> +}
>> +
>> +static int rt5033_led_flash_brightness_set(struct led_classdev_flash
>> *fled_cdev,
>> + u32 brightness)
>> +{
>> + struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
>> + struct rt5033_led *led = sub_led_to_led(sub_led);
>> +
>> + mutex_lock(&led->lock);
>> + sub_led->flash_brightness = brightness;
>> + mutex_unlock(&led->lock);
>> +
>> + return 0;
>> +}
>> +
>> +static int rt5033_led_flash_timeout_set(struct led_classdev_flash
>> *fled_cdev,
>> + u32 timeout)
>> +{
>> + struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
>> + struct rt5033_led *led = sub_led_to_led(sub_led);
>> +
>> + mutex_lock(&led->lock);
>> + sub_led->flash_timeout = timeout;
>> + mutex_unlock(&led->lock);
>> +
>> + return 0;
>> +}
>> +
>> +static int rt5033_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
>> + bool state)
>> +{
>> + struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
>> + struct rt5033_led *led = sub_led_to_led(sub_led);
>> + enum rt5033_fled fled_id = sub_led->fled_id;
>> + int ret;
>> + u8 fled_bit;
>> +
>> + mutex_lock(&led->lock);
>> +
>> + fled_bit = rt5033_get_iout_to_set(led, fled_id);
>> + led->current_iout = fled_bit;
>> +
>> + if (state == 0) {
>> + ret = rt5033_led_iout_disable(led, fled_id);
>> + if (ret < 0)
>> + goto strobe_unlock;
>> + ret = regmap_update_bits(led->regmap,
>> + RT5033_REG_FLED_FUNCTION2,
>> + RT5033_FLED_FUNC2_MASK, 0);
>> + goto strobe_unlock;
>> + }
>> +
>> + if (sub_led->flash_brightness != led->current_flash_brightness) {
>> + ret = rt5033_set_flash_current(led, sub_led->flash_brightness);
>> + if (ret < 0)
>> + goto strobe_unlock;
>> + }
>> +
>> + if (sub_led->flash_timeout != led->current_flash_timeout) {
>> + ret = rt5033_set_timeout(led, sub_led->flash_timeout);
>> + if (ret < 0)
>> + goto strobe_unlock;
>> + }
>> +
>> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>> + RT5033_FLED_FUNC1_MASK, RT5033_FLED_PINCTRL |
>> + RT5033_FLED_STRB_SEL | led->current_iout);
>> + if (ret < 0)
>> + goto strobe_unlock;
>> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
>> + RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED |
>> + RT5033_FLED_SREG_STRB);
>> +
>> + led->current_iout = 0;
>> +strobe_unlock:
>> + mutex_unlock(&led->lock);
>> + return ret;
>> +}
>> +
>> +static const struct led_flash_ops flash_ops = {
>> + .flash_brightness_set = rt5033_led_flash_brightness_set,
>> + .strobe_set = rt5033_led_flash_strobe_set,
>> + .timeout_set = rt5033_led_flash_timeout_set,
>> +};
>> +
>> +static void rt5033_init_flash_properties(struct rt5033_sub_led *sub_led,
>> + struct rt5033_led_config_data *led_cfg)
>> +{
>> + struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev;
>> + struct rt5033_led *led = sub_led_to_led(sub_led);
>> + struct led_flash_setting *tm_set, *fl_set;
>> + enum rt5033_fled fled_id = sub_led->fled_id;
>> +
>> + tm_set = &fled_cdev->timeout;
>> + tm_set->min = RT5033_LED_FLASH_TIMEOUT_MIN;
>> + tm_set->max = led_cfg->flash_max_timeout[fled_id];
>> + tm_set->step = RT5033_LED_FLASH_TIMEOUT_STEP;
>> + tm_set->val = tm_set->max;
>> +
>> + fl_set = &fled_cdev->brightness;
>> + fl_set->min = RT5033_LED_FLASH_BRIGHTNESS_MIN;
>> + if (led->iout_joint)
>> + fl_set->max = min(led_cfg->flash_max_microamp[FLED1] +
>> + led_cfg->flash_max_microamp[FLED2],
>> + (u32)RT5033_LED_FLASH_BRIGHTNESS_MAX_2CH);
>> + else
>> + fl_set->max = min(led_cfg->flash_max_microamp[fled_id],
>> + (u32)RT5033_LED_FLASH_BRIGHTNESS_MAX_1CH);
>> + fl_set->step = RT5033_LED_FLASH_BRIGHTNESS_STEP;
>> + fl_set->val = fl_set->max;
>> +}
>> +
>> +static void rt5033_led_init_fled_cdev(struct rt5033_sub_led *sub_led,
>> + struct rt5033_led_config_data *led_cfg)
>> +{
>> + struct led_classdev_flash *fled_cdev;
>> + struct led_classdev *led_cdev;
>> + enum rt5033_fled fled_id = sub_led->fled_id;
>> +
>> + /* Initialize LED Flash class device */
>> + fled_cdev = &sub_led->fled_cdev;
>> + fled_cdev->ops = &flash_ops;
>> + led_cdev = &fled_cdev->led_cdev;
>> +
>> + led_cdev->name = led_cfg->label[fled_id];
>> +
>> + led_cdev->brightness_set_blocking = rt5033_led_brightness_set;
>> + led_cdev->max_brightness = rt5033_torch_brightness_to_reg(
>> + led_cfg->torch_max_microamp[fled_id]);
>> + led_cdev->flags |= LED_DEV_CAP_FLASH;
>> +
>> + rt5033_init_flash_properties(sub_led, led_cfg);
>> +
>> + sub_led->flash_timeout = fled_cdev->timeout.val;
>> + sub_led->flash_brightness = fled_cdev->brightness.val;
>> +}
>> +
>> +static int rt5033_led_parse_dt(struct rt5033_led *led, struct device *dev,
>> + struct rt5033_led_config_data *cfg,
>> + struct device_node **sub_nodes)
>> +{
>> + struct device_node *np = dev->of_node;
>> + struct device_node *child_node;
>> + struct rt5033_sub_led *sub_leds = led->sub_leds;
>> + struct property *prop;
>> + u32 led_sources[2];
>> + enum rt5033_fled fled_id;
>> + int i, ret;
>> +
>> + for_each_available_child_of_node(np, child_node) {
>> + prop = of_find_property(child_node, "led-sources", NULL);
>> + if (prop) {
>> + const __be32 *srcs = NULL;
>> +
>> + for (i = 0; i < ARRAY_SIZE(led_sources); ++i) {
>> + srcs = of_prop_next_u32(prop, srcs,
>> + &led_sources[i]);
>> + if (!srcs)
>> + break;
>> + }
>> + } else {
>> + dev_err(dev, "led-sources DT property missing\n");
>> + ret = -EINVAL;
>> + goto err_parse_dt;
>> + }
>> +
>> + if (i == 2) {
>> + fled_id = FLED1;
>> + led->fled_mask = FLED1_IOUT | FLED2_IOUT;
>> + } else if (led_sources[0] == FLED1) {
>> + fled_id = FLED1;
>> + led->fled_mask |= FLED1_IOUT;
>> + } else if (led_sources[0] == FLED2) {
>> + fled_id = FLED2;
>> + led->fled_mask |= FLED2_IOUT;
>> + } else {
>> + dev_err(dev, "Wrong led-sources DT property value.\n");
>> + ret = -EINVAL;
>> + goto err_parse_dt;
>> + }
>> +
>> + if (sub_nodes[fled_id]) {
>> + dev_err(dev,
>> + "Conflicting \"led-sources\" DT properties\n");
>> + ret = -EINVAL;
>> + goto err_parse_dt;
>> + }
>> +
>> + sub_nodes[fled_id] = child_node;
>> + sub_leds[fled_id].fled_id = fled_id;
>> +
>> + cfg->label[fled_id] =
>> + of_get_property(child_node, "label", NULL) ? :
>> + child_node->name;
>> +
>> + ret = of_property_read_u32(child_node, "led-max-microamp",
>> + &cfg->torch_max_microamp[fled_id]);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to parse led-max-microamp\n");
>> + goto err_parse_dt;
>> + }
>> +
>> + ret = of_property_read_u32(child_node, "flash-max-microamp",
>> + &cfg->flash_max_microamp[fled_id]);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to parse flash-max-microamp\n");
>> + goto err_parse_dt;
>> + }
>> +
>> + ret = of_property_read_u32(child_node, "flash-max-timeout-us",
>> + &cfg->flash_max_timeout[fled_id]);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to parse flash-max-timeout-us\n");
>> + goto err_parse_dt;
>> + }
>> +
>> + if (++cfg->num_leds == 2 ||
>> + (rt5033_fled_used(led, FLED1) &&
>> + rt5033_fled_used(led, FLED2))) {
>> + of_node_put(child_node);
>> + break;
>> + }
>> + }
>> +
>> + if (cfg->num_leds == 0) {
>> + dev_err(dev, "No DT child node found for connected LED(s).\n");
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +
>> +err_parse_dt:
>> + of_node_put(child_node);
>> + return ret;
>> +}
>> +
>> +static int rt5033_led_probe(struct platform_device *pdev)
>> +{
>> + struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent);
>> + struct rt5033_led *led;
>> + struct rt5033_sub_led *sub_leds;
>> + struct device_node *sub_nodes[2] = {};
>> + struct rt5033_led_config_data led_cfg = {};
>> + int init_fled_cdev[2], i, ret;
>> +
>> + led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
>> + if (!led)
>> + return -ENOMEM;
>> +
>> + platform_set_drvdata(pdev, led);
>> + led->dev = &pdev->dev;
>> + led->regmap = rt5033->regmap;
>> + sub_leds = led->sub_leds;
>> +
>> + ret = rt5033_led_parse_dt(led, &pdev->dev, &led_cfg, sub_nodes);
>> + if (ret < 0)
>> + return ret;
>> +
>> + if (led_cfg.num_leds == 1 && rt5033_fled_used(led, FLED1) &&
>> + rt5033_fled_used(led, FLED2))
>> + led->iout_joint = true;
>> +
>> + mutex_init(&led->lock);
>> +
>> + init_fled_cdev[FLED1] =
>> + led->iout_joint || rt5033_fled_used(led, FLED1);
>> + init_fled_cdev[FLED2] =
>> + !led->iout_joint && rt5033_fled_used(led, FLED2);
>> +
>> + for (i = FLED1; i <= FLED2; ++i) {
>> + if (!init_fled_cdev[i])
>> + continue;
>> +
>> + rt5033_led_init_fled_cdev(&sub_leds[i], &led_cfg);
>> + ret = led_classdev_flash_register(led->dev,
>> + &sub_leds[i].fled_cdev);
>> + if (ret < 0) {
>> + if (i == FLED2)
>> + goto err_register_led2;
>> + else
>> + goto err_register_led1;
>> + }
>> + }
>> +
>> + led->current_iout = 0;
>> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>> + RT5033_FLED_FUNC1_MASK, RT5033_FLED_RESET);
>> + if (ret < 0)
>> + dev_dbg(led->dev, "Failed to reset flash led (%d)\n", ret);
>> +
>> + return 0;
>> +
>> +err_register_led2:
>> + /* It is possible than only FLED2 was to be registered */
>> + if (!init_fled_cdev[FLED1])
>> + goto err_register_led1;
>> + led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
>> +err_register_led1:
>> + mutex_destroy(&led->lock);
>> +
>> + return ret;
>> +}
>> +
>> +static int rt5033_led_remove(struct platform_device *pdev)
>> +{
>> + struct rt5033_led *led = platform_get_drvdata(pdev);
>> + struct rt5033_sub_led *sub_leds = led->sub_leds;
>> +
>> + if (led->iout_joint || rt5033_fled_used(led, FLED1))
>> + led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
>> +
>> + if (!led->iout_joint && rt5033_fled_used(led, FLED2))
>> + led_classdev_flash_unregister(&sub_leds[FLED2].fled_cdev);
>> +
>> + mutex_destroy(&led->lock);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id rt5033_led_match[] = {
>> + { .compatible = "richtek,rt5033-led", },
>> + { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, rt5033_led_match);
>> +
>> +static struct platform_driver rt5033_led_driver = {
>> + .driver = {
>> + .name = "rt5033-led",
>> + .of_match_table = rt5033_led_match,
>> + },
>> + .probe = rt5033_led_probe,
>> + .remove = rt5033_led_remove,
>> +};
>> +module_platform_driver(rt5033_led_driver);
>> +
>> +MODULE_AUTHOR("Ingi Kim <ingi2....@samsung.com>");
>> +MODULE_DESCRIPTION("Richtek RT5033 LED driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_ALIAS("platform:rt5033-led");
>> diff --git a/include/linux/mfd/rt5033-private.h
>> b/include/linux/mfd/rt5033-private.h
>> index 1b63fc2..b20c7e4 100644
>> --- a/include/linux/mfd/rt5033-private.h
>> +++ b/include/linux/mfd/rt5033-private.h
>> @@ -93,6 +93,57 @@ enum rt5033_reg {
>> #define RT5033_RT_CTRL1_UUG_MASK 0x02
>> #define RT5033_RT_HZ_MASK 0x01
>>
>> +/* RT5033 FLED Function1 register */
>> +#define RT5033_FLED_FUNC1_MASK 0x97
>> +#define RT5033_FLED_EN_LEDCS1 0x01
>> +#define RT5033_FLED_EN_LEDCS2 0x02
>> +#define RT5033_FLED_STRB_SEL 0x04
>> +#define RT5033_FLED_PINCTRL 0x10
>> +#define RT5033_FLED_RESET 0x80
>> +
>> +/* RT5033 FLED Function2 register */
>> +#define RT5033_FLED_FUNC2_MASK 0x81
>> +#define RT5033_FLED_ENFLED 0x01
>> +#define RT5033_FLED_SREG_STRB 0x80
>> +
>> +/* RT5033 FLED Strobe Control1 */
>> +#define RT5033_FLED_STRBCTRL1_MASK 0xFF
>> +#define RT5033_FLED_STRBCTRL1_TM_CUR_MAX 0xE0
>> +#define RT5033_FLED_STRBCTRL1_FL_CUR_DEF 0x0D
>> +#define RT5033_FLED_STRBCTRL1_FL_CUR_MAX 0x1F
>> +
>> +/* RT5033 FLED Strobe Control2 */
>> +#define RT5033_FLED_STRBCTRL2_MASK 0x3F
>> +#define RT5033_FLED_STRBCTRL2_TM_DEF 0x0F
>> +#define RT5033_FLED_STRBCTRL2_TM_MAX 0x3F
>> +
>> +/* RT5033 FLED Control1 */
>> +#define RT5033_FLED_CTRL1_MASK 0xF7
>> +#define RT5033_FLED_CTRL1_TORCH_CUR_DEF 0x20
>> +#define RT5033_FLED_CTRL1_TORCH_CUR_MAX 0xF0
>> +#define RT5033_FLED_CTRL1_LBP_DEF 0x02
>> +#define RT5033_FLED_CTRL1_LBP_MAX 0x07
>> +
>> +/* RT5033 FLED Control2 */
>> +#define RT5033_FLED_CTRL2_MASK 0xFF
>> +#define RT5033_FLED_CTRL2_VMID_DEF 0x37
>> +#define RT5033_FLED_CTRL2_VMID_MAX 0x3F
>> +#define RT5033_FLED_CTRL2_TRACK_ALIVE 0x40
>> +#define RT5033_FLED_CTRL2_MID_TRACK 0x80
>> +
>> +/* RT5033 FLED Control4 */
>> +#define RT5033_FLED_CTRL4_MASK 0xE0
>> +#define RT5033_FLED_CTRL4_RESV 0x14
>> +#define RT5033_FLED_CTRL4_VTRREG_DEF 0x40
>> +#define RT5033_FLED_CTRL4_VTRREG_MAX 0x60
>> +#define RT5033_FLED_CTRL4_TRACK_CLK 0x80
>> +
>> +/* RT5033 FLED Control5 */
>> +#define RT5033_FLED_CTRL5_MASK 0xC0
>> +#define RT5033_FLED_CTRL5_RESV 0x10
>> +#define RT5033_FLED_CTRL5_TA_GOOD 0x40
>> +#define RT5033_FLED_CTRL5_TA_EXIST 0x80
>> +
>> /* RT5033 control register */
>> #define RT5033_CTRL_FCCM_BUCK_MASK 0x00
>> #define RT5033_CTRL_BUCKOMS_MASK 0x01
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
