On 02/12/15 15:15, Rob Herring wrote:
On Tue, Dec 01, 2015 at 07:12:49PM +0000, Martyn Welch wrote:
This patch adds documentation for the chromeos-firmware binding.
Cc: Rob Herring <robh...@kernel.org>
Cc: Pawel Moll <pawel.m...@arm.com>
Cc: Mark Rutland <mark.rutl...@arm.com>
Cc: Ian Campbell <ijc+devicet...@hellion.org.uk>
Cc: Kumar Gala <ga...@codeaurora.org>
Cc: devicet...@vger.kernel.org
Signed-off-by: Martyn Welch <martyn.we...@collabora.co.uk>
---
.../devicetree/bindings/misc/chromeos-firmware.txt | 27 ++++++++++++++++++++++
bindings/firmware/ please.
OK.
1 file changed, 27 insertions(+)
create mode 100644
Documentation/devicetree/bindings/misc/chromeos-firmware.txt
diff --git a/Documentation/devicetree/bindings/misc/chromeos-firmware.txt
b/Documentation/devicetree/bindings/misc/chromeos-firmware.txt
new file mode 100644
index 0000000..8240611
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/chromeos-firmware.txt
@@ -0,0 +1,27 @@
+Device-Tree bindings for chromeos-firmware.c.
Perhaps a bit more description what this is.
What aspect of this is firmware? How does this relate to the EC?
With respect to write-protect, this line is the write protection for the
flash which holds the bootloader.
For the developer-switch and recovery-switch, I understand that pulling
these lines low result in the stock firmware forcing the device to boot
into developer mode and recovery mode respectively. The device I have no
longer runs the stock firmware, so I'm not able to confirm this, though
I am able to drive these lines.
As far as I'm aware, none of these are related to the operation of the EC.
Will update the binding documentation.
+
+Required properties:
+ - compatible = "google,gpio-firmware";
No versions?
I'm not aware of any and would rather not start inventing ones that
aren't already there.
+
+Each signal is represented as a sub-node of "chromeos_firmware":
+Subnode properties:
+
+ - gpios: OF device-tree gpio specification.
+
+Example nodes:
+
+ chromeos_firmware {
This should go under /firmware
Ok, will do.
+ compatible = "google,gpio-firmware";
+
+ write-protect {
You need to define what are valid sub nodes. The example is not
documentation.
Ok
+ gpios = <&gpx3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ developer-switch {
+ gpios = <&gpx1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ recovery-switch {
+ gpios = <&gpx0 7 GPIO_ACTIVE_LOW>;
+ };
+ };
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/