3.19.8-ckt11 -stable review patch. If anyone has any objections, please let me know.
------------------ From: Sifan Naeem <sifan.na...@imgtec.com> commit 987008dbc48479af250cddda7f36e920a47ef54f upstream. Currently, after determining the minimum value for the High period (TCKH) the remainder of the internal clock pulses is set as the Low period (TCKL). This causes the i2c clock duty cycle to be much less than 50%. Modify the starting position to TCKH and TCKL at 50% of the internal clock, and adjusts the TCKH and TCKL values from there should the minimum value for TCKL not be met. This results in duty cycles closer to 50%. Fixes: commit 27bce457d588 ("i2c: img-scb: Add Imagination Technologies I2C SCB driver") Signed-off-by: Sifan Naeem <sifan.na...@imgtec.com> Acked-by: James Hogan <james.ho...@imgtec.com> Reviewed-by: James Hartley <james.hart...@imgtec.com> Signed-off-by: Wolfram Sang <w...@the-dreams.de> Signed-off-by: Kamal Mostafa <ka...@canonical.com> --- drivers/i2c/busses/i2c-img-scb.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c index ef8eee1..515cbb4 100644 --- a/drivers/i2c/busses/i2c-img-scb.c +++ b/drivers/i2c/busses/i2c-img-scb.c @@ -1176,25 +1176,29 @@ static int img_i2c_init(struct img_i2c *i2c) ((bitrate_khz * clk_period) / 2)) int_bitrate++; - /* Setup TCKH value */ - tckh = DIV_ROUND_UP(timing.tckh, clk_period); + /* + * Setup clock duty cycle, start with 50% and adjust TCKH and TCKL + * values from there if they don't meet minimum timing requirements + */ + tckh = int_bitrate / 2; + tckl = int_bitrate - tckh; - if (tckh > 0) - data = tckh - 1; - else - data = 0; + /* Adjust TCKH and TCKL values */ + data = DIV_ROUND_UP(timing.tckl, clk_period); - img_i2c_writel(i2c, SCB_TIME_TCKH_REG, data); + if (tckl < data) { + tckl = data; + tckh = int_bitrate - tckl; + } - /* Setup TCKL value */ - tckl = int_bitrate - tckh; + if (tckh > 0) + --tckh; if (tckl > 0) - data = tckl - 1; - else - data = 0; + --tckl; - img_i2c_writel(i2c, SCB_TIME_TCKL_REG, data); + img_i2c_writel(i2c, SCB_TIME_TCKH_REG, tckh); + img_i2c_writel(i2c, SCB_TIME_TCKL_REG, tckl); /* Setup TSDH value */ tsdh = DIV_ROUND_UP(timing.tsdh, clk_period); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/