Heikki Krogerus <heikki.kroge...@linux.intel.com> writes:
> On Thu, Dec 24, 2015 at 06:15:14PM +0300, Sergei Ianovich wrote:
>> pxa2xx-uart was a separate uart platform driver. It was declaring
>> the same device names and numbers as 8250 driver. As a result,
>> it was impossible to use 8250 driver on PXA SoCs.
>>
>> Upon closer examination pxa2xx-uart turned out to be a clone of
>> 8250_core driver.
>>
>> Workaround for Erratum #19 according to Marvel(R) PXA270M Processor
>> Specification Update (April 19, 2010) is dropped. 8250_core reads
>> from FIFO immediately after checking DR bit in LSR.
>>
>> The patch leaves the original SERIAL_PXA driver around. The original
>> driver is just marked DEPRECATED in Kconfig and C source. When
>> the original driver is considered safe to remove, no changes
>> to SERIAL_8250 will be necessary.
>>
>> Compiling SERIAL_8250_CONSOLE and SERIAL_PXA_CONSOLE even without
>> SERIAL_8250_PXA breaks console for SERIAL_PXA. For this reasons, the new
>> and the original drivers are made mutually exclusive.
>>
>> Signed-off-by: Sergei Ianovich <ynv...@gmail.com>
>> CC: Heikki Krogerus <heikki.kroge...@linux.intel.com>
>
> Reviewed-by: Heikki Krogerus <heikki.kroge...@linux.intel.com>
Tested-by: Robert Jarzmik <robert.jarz...@free.fr>
The tests were done on lubbock(pxa25x), mainstone(pxa27x) and zylonite(pxa3xx)
boards.
I don't expect any breakage in PXA architecture. There might be issues with :
- arch/arm/mach-pxa/capc7117.c
- arch/arm/mach-pxa/viper.c
-arch/arm/mach-pxa/zeus.c (very small probability for this one)
The mitigation plan if any concern arises is to fallback on the
CONFIG_SERIAL_PXA configuration.
I find a bit misleading this chunk, but I'm not very good at KConfig :
config SERIAL_PXA
- bool "PXA serial port support"
+ bool "PXA serial port support (DEPRECATED)"
depends on ARCH_PXA || ARCH_MMP
select SERIAL_CORE
+ select SERIAL_8250_PXA if SERIAL_8250=y
+ select SERIAL_PXA_NON8250 if !SERIAL_8250=y
What bothers me a bit is that selecting this option has a different effect
whether SERIAL_8250 is set or not. Somebody selecting the deprecated option
obviously wants the old driver, but will be provided the new one if his config
has SERIAL_8250 set. Maybe someone else can comment on this ...
This apart, from pxa perspective, it's good to go.
Cheers.
--
Robert
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
