Hi,
On 21-01-16 06:26, Chen-Yu Tsai wrote:
DDR transfer modes include UHS-1 DDR50 and MMC HS-DDR (or MMC_DDR52).
Consider MMC_DDR52 when setting clock delays.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
drivers/mmc/host/sunxi-mmc.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index 4bec87458317..b403a2433eec 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -687,7 +687,8 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host
*host,
oclk_dly = host->clk_delays[SDXC_CLK_25M].output;
sclk_dly = host->clk_delays[SDXC_CLK_25M].sample;
} else if (rate <= 50000000) {
Shouldn't this be <= 52000000 then, considering that we may at one point get
some PLL setup where we may actually be able to do 52000000 for
MMC_TIMING_MMC_DDR52 ?
- if (ios->timing == MMC_TIMING_UHS_DDR50) {
+ if (ios->timing == MMC_TIMING_UHS_DDR50 ||
+ ios->timing == MMC_TIMING_MMC_DDR52) {
oclk_dly = host->clk_delays[SDXC_CLK_50M_DDR].output;
sclk_dly = host->clk_delays[SDXC_CLK_50M_DDR].sample;
} else {
@@ -762,7 +763,8 @@ static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct
mmc_ios *ios)
/* set ddr mode */
rval = mmc_readl(host, REG_GCTRL);
- if (ios->timing == MMC_TIMING_UHS_DDR50)
+ if (ios->timing == MMC_TIMING_UHS_DDR50 ||
+ ios->timing == MMC_TIMING_MMC_DDR52)
rval |= SDXC_DDR_MODE;
else
rval &= ~SDXC_DDR_MODE;
Regards,
Hans
