On Tue, Feb 02, 2016 at 07:07:39PM +0100, Gregory CLEMENT wrote: > From: Wilson Ding <[email protected]> > > Armada-3700's uart is a simple serial port, which doesn't > support. Configuring the modem control lines. The uart port has a 32 > bytes Tx FIFO and a 64 bytes Rx FIFO > > The uart driver implements the uart core operations. It also support the > system (early) console based on Armada-3700's serial port. > > Known Issue: > > The uart driver currently doesn't support clock programming, which means > the baud-rate stays with the default value configured by the bootloader > at boot time > > [[email protected]: Rewrite many part which are too long > to enumerate] > > Signed-off-by: Wilson Ding <[email protected]> > Signed-off-by: Nadav Haklai <[email protected]> > Signed-off-by: Gregory CLEMENT <[email protected]> > --- > .../devicetree/bindings/tty/serial/mvebu-uart.txt | 13 +
Acked-by: Rob Herring <[email protected]> > Documentation/kernel-parameters.txt | 6 + > drivers/tty/serial/Kconfig | 22 + > drivers/tty/serial/Makefile | 1 + > drivers/tty/serial/mvebu-uart.c | 649 > +++++++++++++++++++++ > include/uapi/linux/serial_core.h | 3 + > 6 files changed, 694 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/tty/serial/mvebu-uart.txt > create mode 100644 drivers/tty/serial/mvebu-uart.c
