On 2016/2/2 18:13, Andy Yan wrote:
Add syscon-reboot-mode driver DT node for rk3368 platform
Signed-off-by: Andy Yan <andy....@rock-chips.com>
Work fine with my rk3368-sheep board :)
Tested-by: Shawn Lin <shawn....@rock-chips.com>
---
Changes in v3:
- descirbe all reboot mode as property instead of subnode
Changes in v2:
- make this node as a subnode of pmugrf
Changes in v1: None
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 122777b..5213713 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -45,6 +45,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip_boot-mode.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -554,8 +555,19 @@
};
pmugrf: syscon@ff738000 {
- compatible = "rockchip,rk3368-pmugrf", "syscon";
+ compatible = "rockchip,rk3368-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xff738000 0x0 0x1000>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x200>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-fastboot = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_LOADER>;
+ mode-maskrom = <BOOT_MASKROM>;
+
+ };
};
cru: clock-controller@ff760000 {
--
Best Regards
Shawn Lin
