On Mon, 15 Feb 2016, Dave Chinner wrote:
On Mon, Feb 15, 2016 at 03:52:31PM -0800, Daniel Walker wrote:
On 02/15/2016 03:05 PM, Dave Chinner wrote:
What you are proposing isn't accurate, either, because it will be
stale by the time the inode cache traversal is completed and the
count returned to userspace. e.g. pages that have already been
accounted as droppable can be reclaimed or marked dirty and hence
"unreclaimable".
IOWs, the best you are going to get is an approximate point-in-time
indication of how much memory is available for immediate reclaim.
We're never going to get an accurate measure in userspace unless we
accurately account for it in the kernel itself. Which, I think it
has already been pointed out, is prohibitively expensive so isn't
done.
As for a replacement, looking at what pages you consider "droppable"
is really only file pages that are not under dirty or under
writeback. i.e. from /proc/meminfo:
Active(file): 220128 kB
Inactive(file): 60232 kB
Dirty: 0 kB
Writeback: 0 kB
i.e. reclaimable file cache = Active + inactive - dirty - writeback.
.....
Approximate point-in-time indication is an accurate
characterization of what we are doing. This is good enough for us.
NO matter what we do, we are never going to be able to address the
"time of check to time of use” window. But, this
approximation works reasonably well for our use case.
As to his other suggestion of estimating the droppable cache, I
have considered it but found it unusable. The problem is the
inactive file pages count a whole lot pages more than the
droppable pages.
inactive file pages are supposed to be exactly that - inactive. i.e.
the have not been referenced recently, and are unlikely to be dirty.
They should be immediately reclaimable.
See the value of these, before and [after] dropping reclaimable
pages.
Before:
Active(file): 183488 kB
Inactive(file): 180504 kB
After (the drop caches):
Active(file): 89468 kB
Inactive(file): 32016 kB
The dirty and the write back are mostly 0KB under our workload as
we are mostly dealing with the readonly file pages of binaries
(programs/libraries).. "
if the pages are read-only, then they are clean. If they are on the
LRUs, then they should be immediately reclaimable.
Let's go back to your counting criteria of all those file pages:
+static int is_page_droppable(struct page *page)
+{
+ struct address_space *mapping = page_mapping(page);
+
+ if (!mapping)
+ return 0;
invalidated page, should be none.
+ if (PageDirty(page))
+ return 0;
Dirty get ignored, in /proc/meminfo.
+ if (PageWriteback(page))
+ return 0;
Writeback ignored, in /proc/meminfo.
+ if (page_mapped(page))
+ return 0;
Clean page, mapped into userspace get ignored, in /proc/meminfo.
+ if (page->mapping != mapping)
+ return 0;
Invalidation race, should be none.
+ if (page_has_private(page))
+ return 0;
That's simply wrong. For XFs inodes, that will skip *every page on
every inode* because it attachs bufferheads to every page, even on
read. ext4 behaviour will depend on mount options and whether the
page has been dirtied or not. IOWs, this turns the number of
reclaimable pages in the inode cache into garbage because it counts
clean, reclaimable pages with attached bufferheads as non-reclaimable.
But let's ignore that by assuming you have read-only pages without
bufferheads (e.g. ext4, blocksize = pagesize, nobh mode on read-only
pages). That means the only thing that makes a difference to the
count returned is mapped pages, a count of which is also in
/proc/meminfo.
So, to pick a random active server here:
before after
Active(file): 12103200 kB 24060 kB
Inactive(file): 5976676 kB 1380 kB
Mapped: 31308 kB 31308 kB
How much was not reclaimed? Roughly the same number of pages as the
Mapped count, and that's exactly what we'd expect to see from the
above page walk counting code. Hence a slightly better approximation
of the pages that dropping caches will reclaim is:
reclaimable pages = active + inactive - dirty - writeback - mapped
Thanks Dave. I considered that, but see this.
Mapped page count below is much higher than the
(active(file) + inactive (file)).
Mapped seems to include all page cache pages mapped into the process memory,
including the shared memory pages, file pages and few other type
mappings.
I suppose the above can be rewritten as (mapped is still high):
reclaimable pages = active + inactive + shmem - dirty - writeback - mapped
What about kernel pages mapped into user address space? Does "Mapped"
include those pages as well? How do we exclude them? What about device
mappings? Are these excluded in the "Mapped" pages calculation?
MemTotal: 1025444 kB
MemFree: 264712 kB
Buffers: 1220 kB
Cached: 212736 kB
SwapCached: 0 kB
Active: 398232 kB
Inactive: 240892 kB
Active(anon): 307588 kB
Inactive(anon): 204860 kB
Active(file): 90644 kB
Inactive(file): 36032 kB
Unevictable: 22672 kB
Mlocked: 0 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 24 kB
Writeback: 0 kB
AnonPages: 447848 kB
Mapped: 202624 kB
Shmem: 64608 kB
Slab: 29632 kB
SReclaimable: 10996 kB
SUnreclaim: 18636 kB
KernelStack: 2528 kB
PageTables: 7936 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 512720 kB
Committed_AS: 973504 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 140060 kB
VmallocChunk: 34359595388 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 10240 kB
DirectMap2M: 1042432 kB
thanks,
nag
Cheers,
Dave.
--
Dave Chinner
da...@fromorbit.com
