On 2016년 03월 14일 17:31, Krzysztof Kozlowski wrote:
> On 14.03.2016 11:04, Chanwoo Choi wrote:
>> From: Jaehoon Chung <jh80.ch...@samsung.com>
>>
>> This patch adds MSHC (Mobile Storage Host Controller) dt node for
>> Exynos3250 SoC. MSHC is an interface between the system and the SD card
>>
>> Signed-off-by: Jaehoon Chung <jh80.ch...@samsung.com>
>> Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com>
>> ---
>> arch/arm/boot/dts/exynos3250-artik5-devel.dts | 16 ++++++++++++++++
>> 1 file changed, 16 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos3250-artik5-devel.dts
>> b/arch/arm/boot/dts/exynos3250-artik5-devel.dts
>> index d17c28969118..a371baf8536d 100644
>> --- a/arch/arm/boot/dts/exynos3250-artik5-devel.dts
>> +++ b/arch/arm/boot/dts/exynos3250-artik5-devel.dts
>> @@ -21,6 +21,22 @@
>> "samsung,exynos3250", "samsung,exynos3";
>> };
>>
>> +&mshc_2 {
>> + num-slots = <1>;
>> + cap-sd-highspeed;
>> + disable-wp;
>> + card-detect-delay = <200>;
>> + clock-frequency = <100000000>;
>> + clock-freq-min-max = <400000 100000000>;
>> + samsung,dw-mshc-ciu-div = <1>;
>> + samsung,dw-mshc-sdr-timing = <0 1>;
>> + samsung,dw-mshc-ddr-timing = <1 2>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>;
>> + bus-width = <4>;
>> + status = "okay";
>
> vqmmc-supply = ldo3?
ldo3 is always on state because ldo3 is used for various IP in exynos3250.
I think that we had better to remain always on state for ldo3.
Best Regards,
Chanwoo Choi
