On Tue, Mar 08, 2016 at 09:03:59AM +0100, Lothar Waßmann wrote:
> DT maintainers don't like the 'simple-bus' container around the
> regulator nodes. So remove it.
>
> Signed-off-by: Lothar Waßmann <l...@karo-electronics.de>
> ---
> arch/arm/boot/dts/imx6qdl-tx6.dtsi | 178
> +++++++++++++++++--------------------
> 1 file changed, 81 insertions(+), 97 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
> b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
> index 912f284..ec374f5 100644
> --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
> @@ -97,104 +97,88 @@
> };
> };
>
> - regulators {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <0>;
> + reg_3v3_etn: reg-3v3-etn {
Please use the following naming schema for fixed regulators.
reg_xxx: regulator-xxx {
...
}
Shawn
> + compatible = "regulator-fixed";
> + regulator-name = "3V3_ETN";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_etnphy_power>;
> + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
>
> - reg_3v3_etn: regulator@0 {
> - compatible = "regulator-fixed";
> - reg = <0>;
> - regulator-name = "3V3_ETN";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_etnphy_power>;
> - gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> - };
> -
> - reg_2v5: regulator@1 {
> - compatible = "regulator-fixed";
> - reg = <1>;
> - regulator-name = "2V5";
> - regulator-min-microvolt = <2500000>;
> - regulator-max-microvolt = <2500000>;
> - regulator-always-on;
> - };
> -
> - reg_3v3: regulator@2 {
> - compatible = "regulator-fixed";
> - reg = <2>;
> - regulator-name = "3V3";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> -
> - reg_can_xcvr: regulator@3 {
> - compatible = "regulator-fixed";
> - reg = <3>;
> - regulator-name = "CAN XCVR";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_flexcan_xcvr>;
> - gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
> - enable-active-low;
> - };
> -
> - reg_lcd0_pwr: regulator@4 {
> - compatible = "regulator-fixed";
> - reg = <4>;
> - regulator-name = "LCD0 POWER";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lcd0_pwr>;
> - gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - reg_lcd1_pwr: regulator@5 {
> - compatible = "regulator-fixed";
> - reg = <5>;
> - regulator-name = "LCD1 POWER";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lcd1_pwr>;
> - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - reg_usbh1_vbus: regulator@6 {
> - compatible = "regulator-fixed";
> - reg = <6>;
> - regulator-name = "usbh1_vbus";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usbh1_vbus>;
> - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> - };
> -
> - reg_usbotg_vbus: regulator@7 {
> - compatible = "regulator-fixed";
> - reg = <7>;
> - regulator-name = "usbotg_vbus";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usbotg_vbus>;
> - gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> - };
> + reg_2v5: reg-2v5 {
> + compatible = "regulator-fixed";
> + regulator-name = "2V5";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <2500000>;
> + regulator-always-on;
> + };
> +
> + reg_3v3: reg-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + reg_can_xcvr: reg-can-xcvr {
> + compatible = "regulator-fixed";
> + regulator-name = "CAN XCVR";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan_xcvr>;
> + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
> + enable-active-low;
> + };
> +
> + reg_lcd0_pwr: reg-lcd0-pwr {
> + compatible = "regulator-fixed";
> + regulator-name = "LCD0 POWER";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd0_pwr>;
> + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + regulator-boot-on;
> + };
> +
> + reg_lcd1_pwr: reg-lcd1-pwr {
> + compatible = "regulator-fixed";
> + regulator-name = "LCD1 POWER";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd1_pwr>;
> + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + regulator-boot-on;
> + };
> +
> + reg_usbh1_vbus: reg-usbh1-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usbh1_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbh1_vbus>;
> + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_usbotg_vbus: reg-usbotg-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usbotg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg_vbus>;
> + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> };
>
> sound {
> --
> 2.1.4
>
>
