Am Freitag, 1. April 2016, 16:59:15 schrieb Vivek Gautam:
> Adding vendor specific directories in phy to group
> phy drivers under their respective vendor umbrella.
>
> Signed-off-by: Vivek Gautam <gautam.vi...@samsung.com>
I don't have a preference about the phy-locations either way, so for
Rockchip phys
Acked-by: Heiko Stuebner <he...@sntech.de>
> ---
>
> With growing number of phy drivers, it makes sense to
> group these drivers under their respective vendor/platform
> umbrella directory.
>
> Build-tested 'multi_v7_defconfig'.
>
> drivers/phy/Kconfig | 386
> +--------------------- drivers/phy/Makefile
> | 57 +---
> drivers/phy/bcom/Kconfig | 27 ++
> drivers/phy/bcom/Makefile | 3 +
> drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0
> drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0
> drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0
> drivers/phy/hisi/Kconfig | 20 ++
> drivers/phy/hisi/Makefile | 2 +
> drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0
> drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0
> drivers/phy/marvell/Kconfig | 50 +++
> drivers/phy/marvell/Makefile | 6 +
> drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0
> drivers/phy/{ => marvell}/phy-berlin-sata.c | 0
> drivers/phy/{ => marvell}/phy-berlin-usb.c | 0
> drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0
> drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0
> drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0
> drivers/phy/qcom/Kconfig | 23 ++
> drivers/phy/qcom/Makefile | 5 +
> drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0
> drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0
> drivers/phy/rcar/Kconfig | 16 +
> drivers/phy/rcar/Makefile | 2 +
> drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0
> drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0
> drivers/phy/rockchip/Kconfig | 23 ++
> drivers/phy/rockchip/Makefile | 3 +
> drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0
> drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0
> drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0
> drivers/phy/samsung/Kconfig | 87 +++++
> drivers/phy/samsung/Makefile | 10 +
> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
> drivers/phy/st/Kconfig | 51 +++
> drivers/phy/st/Makefile | 6 +
> drivers/phy/{ => st}/phy-miphy28lp.c | 0
> drivers/phy/{ => st}/phy-miphy365x.c | 0
> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0
> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0
> drivers/phy/{ => st}/phy-stih407-usb.c | 0
> drivers/phy/{ => st}/phy-stih41x-usb.c | 0
> drivers/phy/sunxi/Kconfig | 28 ++
> drivers/phy/sunxi/Makefile | 2 +
> drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0
> drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0
> drivers/phy/ti/Kconfig | 67 ++++
> drivers/phy/ti/Makefile | 6 +
> drivers/phy/{ => ti}/phy-dm816x-usb.c | 0
> drivers/phy/{ => ti}/phy-omap-control.c | 0
> drivers/phy/{ => ti}/phy-omap-usb2.c | 0
> drivers/phy/{ => ti}/phy-ti-pipe3.c | 0
> drivers/phy/{ => ti}/phy-tusb1210.c | 0
> drivers/phy/{ => ti}/phy-twl4030-usb.c | 0
> drivers/phy/{ => ti}/ulpi_phy.h | 0
> 71 files changed, 464 insertions(+), 416 deletions(-)
> create mode 100644 drivers/phy/bcom/Kconfig
> create mode 100644 drivers/phy/bcom/Makefile
> rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%)
> rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%)
> rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%)
> create mode 100644 drivers/phy/hisi/Kconfig
> create mode 100644 drivers/phy/hisi/Makefile
> rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%)
> rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%)
> create mode 100644 drivers/phy/marvell/Kconfig
> create mode 100644 drivers/phy/marvell/Makefile
> rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%)
> rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%)
> rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%)
> rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%)
> rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%)
> rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%)
> create mode 100644 drivers/phy/qcom/Kconfig
> create mode 100644 drivers/phy/qcom/Makefile
> rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%)
> create mode 100644 drivers/phy/rcar/Kconfig
> create mode 100644 drivers/phy/rcar/Makefile
> rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%)
> rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%)
> create mode 100644 drivers/phy/rockchip/Kconfig
> create mode 100644 drivers/phy/rockchip/Makefile
> rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%)
> rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%)
> rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%)
> create mode 100644 drivers/phy/samsung/Kconfig
> create mode 100644 drivers/phy/samsung/Makefile
> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
> create mode 100644 drivers/phy/st/Kconfig
> create mode 100644 drivers/phy/st/Makefile
> rename drivers/phy/{ => st}/phy-miphy28lp.c (100%)
> rename drivers/phy/{ => st}/phy-miphy365x.c (100%)
> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
> rename drivers/phy/{ => st}/phy-stih407-usb.c (100%)
> rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%)
> create mode 100644 drivers/phy/sunxi/Kconfig
> create mode 100644 drivers/phy/sunxi/Makefile
> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)
> create mode 100644 drivers/phy/ti/Kconfig
> create mode 100644 drivers/phy/ti/Makefile
> rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%)
> rename drivers/phy/{ => ti}/phy-omap-control.c (100%)
> rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%)
> rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%)
> rename drivers/phy/{ => ti}/phy-tusb1210.c (100%)
> rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%)
> rename drivers/phy/{ => ti}/ulpi_phy.h (100%)
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 26566db..80c8c68 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -15,45 +15,6 @@ config GENERIC_PHY
> phy users can obtain reference to the PHY. All the users of this
> framework should select this config.
>
> -config PHY_BERLIN_USB
> - tristate "Marvell Berlin USB PHY Driver"
> - depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
> - select GENERIC_PHY
> - help
> - Enable this to support the USB PHY on Marvell Berlin SoCs.
> -
> -config PHY_BERLIN_SATA
> - tristate "Marvell Berlin SATA PHY driver"
> - depends on ARCH_BERLIN && HAS_IOMEM && OF
> - select GENERIC_PHY
> - help
> - Enable this to support the SATA PHY on Marvell Berlin SoCs.
> -
> -config ARMADA375_USBCLUSTER_PHY
> - def_bool y
> - depends on MACH_ARMADA_375 || COMPILE_TEST
> - depends on OF && HAS_IOMEM
> - select GENERIC_PHY
> -
> -config PHY_DM816X_USB
> - tristate "TI dm816x USB PHY driver"
> - depends on ARCH_OMAP2PLUS
> - depends on USB_SUPPORT
> - select GENERIC_PHY
> - select USB_PHY
> - help
> - Enable this for dm816x USB to work.
> -
> -config PHY_EXYNOS_MIPI_VIDEO
> - tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
> - depends on HAS_IOMEM
> - depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> - select GENERIC_PHY
> - default y if ARCH_S5PV210 || ARCH_EXYNOS
> - help
> - Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
> - and EXYNOS SoCs.
> -
> config PHY_LPC18XX_USB_OTG
> tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
> depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
> @@ -65,154 +26,6 @@ config PHY_LPC18XX_USB_OTG
> This driver is need for USB0 support on LPC18xx/43xx and takes
> care of enabling and clock setup.
>
> -config PHY_PXA_28NM_HSIC
> - tristate "Marvell USB HSIC 28nm PHY Driver"
> - depends on HAS_IOMEM
> - select GENERIC_PHY
> - help
> - Enable this to support Marvell USB HSIC PHY driver for Marvell
> - SoC. This driver will do the PHY initialization and shutdown.
> - The PHY driver will be used by Marvell ehci driver.
> -
> - To compile this driver as a module, choose M here.
> -
> -config PHY_PXA_28NM_USB2
> - tristate "Marvell USB 2.0 28nm PHY Driver"
> - depends on HAS_IOMEM
> - select GENERIC_PHY
> - help
> - Enable this to support Marvell USB 2.0 PHY driver for Marvell
> - SoC. This driver will do the PHY initialization and shutdown.
> - The PHY driver will be used by Marvell udc/ehci/otg driver.
> -
> - To compile this driver as a module, choose M here.
> -
> -config PHY_MVEBU_SATA
> - def_bool y
> - depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
> - depends on OF
> - select GENERIC_PHY
> -
> -config PHY_MIPHY28LP
> - tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
> - depends on ARCH_STI
> - select GENERIC_PHY
> - help
> - Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
> - that is part of STMicroelectronics STiH407 SoC.
> -
> -config PHY_MIPHY365X
> - tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
> - depends on ARCH_STI
> - depends on HAS_IOMEM
> - depends on OF
> - select GENERIC_PHY
> - help
> - Enable this to support the miphy transceiver (for SATA/PCIE)
> - that is part of STMicroelectronics STiH41x SoC series.
> -
> -config PHY_RCAR_GEN2
> - tristate "Renesas R-Car generation 2 USB PHY driver"
> - depends on ARCH_SHMOBILE
> - depends on GENERIC_PHY
> - help
> - Support for USB PHY found on Renesas R-Car generation 2 SoCs.
> -
> -config PHY_RCAR_GEN3_USB2
> - tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
> - depends on OF && ARCH_SHMOBILE
> - select GENERIC_PHY
> - help
> - Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
> -
> -config OMAP_CONTROL_PHY
> - tristate "OMAP CONTROL PHY Driver"
> - depends on ARCH_OMAP2PLUS || COMPILE_TEST
> - help
> - Enable this to add support for the PHY part present in the control
> - module. This driver has API to power on the USB2 PHY and to write to
> - the mailbox. The mailbox is present only in omap4 and the register to
> - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
> - additional register to power on USB3 PHY/SATA PHY/PCIE PHY
> - (PIPE3 PHY).
> -
> -config OMAP_USB2
> - tristate "OMAP USB2 PHY Driver"
> - depends on ARCH_OMAP2PLUS
> - depends on USB_SUPPORT
> - select GENERIC_PHY
> - select USB_PHY
> - select OMAP_CONTROL_PHY
> - depends on OMAP_OCP2SCP
> - help
> - Enable this to support the transceiver that is part of SOC. This
> - driver takes care of all the PHY functionality apart from comparator.
> - The USB OTG controller communicates with the comparator using this
> - driver.
> -
> -config TI_PIPE3
> - tristate "TI PIPE3 PHY Driver"
> - depends on ARCH_OMAP2PLUS || COMPILE_TEST
> - select GENERIC_PHY
> - select OMAP_CONTROL_PHY
> - depends on OMAP_OCP2SCP
> - help
> - Enable this to support the PIPE3 PHY that is part of TI SOCs. This
> - driver takes care of all the PHY functionality apart from comparator.
> - This driver interacts with the "OMAP Control PHY Driver" to power
> - on/off the PHY.
> -
> -config TWL4030_USB
> - tristate "TWL4030 USB Transceiver Driver"
> - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
> - depends on USB_SUPPORT
> - select GENERIC_PHY
> - select USB_PHY
> - help
> - Enable this to support the USB OTG transceiver on TWL4030
> - family chips (including the TWL5030 and TPS659x0 devices).
> - This transceiver supports high and full speed devices plus,
> - in host mode, low speed.
> -
> -config PHY_EXYNOS_DP_VIDEO
> - tristate "EXYNOS SoC series Display Port PHY driver"
> - depends on OF
> - depends on ARCH_EXYNOS || COMPILE_TEST
> - default ARCH_EXYNOS
> - select GENERIC_PHY
> - help
> - Support for Display Port PHY found on Samsung EXYNOS SoCs.
> -
> -config BCM_KONA_USB2_PHY
> - tristate "Broadcom Kona USB2 PHY Driver"
> - depends on HAS_IOMEM
> - select GENERIC_PHY
> - help
> - Enable this to support the Broadcom Kona USB 2.0 PHY.
> -
> -config PHY_EXYNOS5250_SATA
> - tristate "Exynos5250 Sata SerDes/PHY driver"
> - depends on SOC_EXYNOS5250
> - depends on HAS_IOMEM
> - depends on OF
> - select GENERIC_PHY
> - select I2C
> - select I2C_S3C2410
> - select MFD_SYSCON
> - help
> - Enable this to support SATA SerDes/Phy found on Samsung's
> - Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
> - SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
> - port to accept one SATA device.
> -
> -config PHY_HIX5HD2_SATA
> - tristate "HIX5HD2 SATA PHY Driver"
> - depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
> - select GENERIC_PHY
> - select MFD_SYSCON
> - help
> - Support for SATA PHY on Hisilicon hix5hd2 Soc.
> -
> config PHY_MT65XX_USB3
> tristate "Mediatek USB3.0 PHY Driver"
> depends on ARCH_MEDIATEK && OF
> @@ -222,93 +35,6 @@ config PHY_MT65XX_USB3
> for mt65xx SoCs. it supports two usb2.0 ports and
> one usb3.0 port.
>
> -config PHY_HI6220_USB
> - tristate "hi6220 USB PHY support"
> - depends on (ARCH_HISI && ARM64) || COMPILE_TEST
> - select GENERIC_PHY
> - select MFD_SYSCON
> - help
> - Enable this to support the HISILICON HI6220 USB PHY.
> -
> - To compile this driver as a module, choose M here.
> -
> -config PHY_SUN4I_USB
> - tristate "Allwinner sunxi SoC USB PHY driver"
> - depends on ARCH_SUNXI && HAS_IOMEM && OF
> - depends on RESET_CONTROLLER
> - depends on EXTCON
> - depends on POWER_SUPPLY
> - select GENERIC_PHY
> - help
> - Enable this to support the transceiver that is part of Allwinner
> - sunxi SoCs.
> -
> - This driver controls the entire USB PHY block, both the USB OTG
> - parts, as well as the 2 regular USB 2 host PHYs.
> -
> -config PHY_SUN9I_USB
> - tristate "Allwinner sun9i SoC USB PHY driver"
> - depends on ARCH_SUNXI && HAS_IOMEM && OF
> - depends on RESET_CONTROLLER
> - depends on USB_COMMON
> - select GENERIC_PHY
> - help
> - Enable this to support the transceiver that is part of Allwinner
> - sun9i SoCs.
> -
> - This driver controls each individual USB 2 host PHY.
> -
> -config PHY_SAMSUNG_USB2
> - tristate "Samsung USB 2.0 PHY driver"
> - depends on HAS_IOMEM
> - depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
> - select GENERIC_PHY
> - select MFD_SYSCON
> - default ARCH_EXYNOS
> - help
> - Enable this to support the Samsung USB 2.0 PHY driver for Samsung
> - SoCs. This driver provides the interface for USB 2.0 PHY. Support
> - for particular PHYs will be enabled based on the SoC type in addition
> - to this driver.
> -
> -config PHY_S5PV210_USB2
> - bool "Support for S5PV210"
> - depends on PHY_SAMSUNG_USB2
> - depends on ARCH_S5PV210
> - help
> - Enable USB PHY support for S5PV210. This option requires that Samsung
> - USB 2.0 PHY driver is enabled and means that support for this
> - particular SoC is compiled in the driver. In case of S5PV210 two phys
> - are available - device and host.
> -
> -config PHY_EXYNOS4210_USB2
> - bool
> - depends on PHY_SAMSUNG_USB2
> - default CPU_EXYNOS4210
> -
> -config PHY_EXYNOS4X12_USB2
> - bool
> - depends on PHY_SAMSUNG_USB2
> - default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
> -
> -config PHY_EXYNOS5250_USB2
> - bool
> - depends on PHY_SAMSUNG_USB2
> - default SOC_EXYNOS5250 || SOC_EXYNOS5420
> -
> -config PHY_EXYNOS5_USBDRD
> - tristate "Exynos5 SoC series USB DRD PHY driver"
> - depends on ARCH_EXYNOS && OF
> - depends on HAS_IOMEM
> - depends on USB_DWC3_EXYNOS
> - select GENERIC_PHY
> - select MFD_SYSCON
> - default y
> - help
> - Enable USB DRD PHY support for Exynos 5 SoC series.
> - This driver provides PHY interface for USB 3.0 DRD controller
> - present on Exynos5 SoC series.
> -
> config PHY_PISTACHIO_USB
> tristate "IMG Pistachio USB2.0 PHY driver"
> depends on MACH_PISTACHIO
> @@ -316,55 +42,6 @@ config PHY_PISTACHIO_USB
> help
> Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
>
> -config PHY_QCOM_APQ8064_SATA
> - tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
> - depends on ARCH_QCOM
> - depends on HAS_IOMEM
> - depends on OF
> - select GENERIC_PHY
> -
> -config PHY_QCOM_IPQ806X_SATA
> - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
> - depends on ARCH_QCOM
> - depends on HAS_IOMEM
> - depends on OF
> - select GENERIC_PHY
> -
> -config PHY_ROCKCHIP_USB
> - tristate "Rockchip USB2 PHY Driver"
> - depends on ARCH_ROCKCHIP && OF
> - select GENERIC_PHY
> - help
> - Enable this to support the Rockchip USB 2.0 PHY.
> -
> -config PHY_ROCKCHIP_EMMC
> - tristate "Rockchip EMMC PHY Driver"
> - depends on ARCH_ROCKCHIP && OF
> - select GENERIC_PHY
> - help
> - Enable this to support the Rockchip EMMC PHY.
> -
> -config PHY_ROCKCHIP_DP
> - tristate "Rockchip Display Port PHY Driver"
> - depends on ARCH_ROCKCHIP && OF
> - select GENERIC_PHY
> - help
> - Enable this to support the Rockchip Display Port PHY.
> -
> -config PHY_ST_SPEAR1310_MIPHY
> - tristate "ST SPEAR1310-MIPHY driver"
> - select GENERIC_PHY
> - depends on MACH_SPEAR1310 || COMPILE_TEST
> - help
> - Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
> -
> -config PHY_ST_SPEAR1340_MIPHY
> - tristate "ST SPEAR1340-MIPHY driver"
> - select GENERIC_PHY
> - depends on MACH_SPEAR1340 || COMPILE_TEST
> - help
> - Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
> -
> config PHY_XGENE
> tristate "APM X-Gene 15Gbps PHY support"
> depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
> @@ -372,53 +49,20 @@ config PHY_XGENE
> help
> This option enables support for APM X-Gene SoC multi-purpose PHY.
>
> -config PHY_STIH407_USB
> - tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
> - depends on RESET_CONTROLLER
> - depends on ARCH_STI || COMPILE_TEST
> - select GENERIC_PHY
> - help
> - Enable this support to enable the picoPHY device used by USB2
> - and USB3 controllers on STMicroelectronics STiH407 SoC families.
> -
> -config PHY_STIH41X_USB
> - tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
> - depends on ARCH_STI
> - select GENERIC_PHY
> - help
> - Enable this to support the USB transceiver that is part of
> - STMicroelectronics STiH41x SoC series.
> -
> -config PHY_QCOM_UFS
> - tristate "Qualcomm UFS PHY driver"
> - depends on OF && ARCH_QCOM
> - select GENERIC_PHY
> - help
> - Support for UFS PHY on QCOM chipsets.
> -
> -config PHY_TUSB1210
> - tristate "TI TUSB1210 ULPI PHY module"
> - depends on USB_ULPI_BUS
> - select GENERIC_PHY
> - help
> - Support for TI TUSB1210 USB ULPI PHY.
> -
> -config PHY_BRCMSTB_SATA
> - tristate "Broadcom STB SATA PHY driver"
> - depends on ARCH_BRCMSTB || BMIPS_GENERIC
> - depends on OF
> - select GENERIC_PHY
> - help
> - Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB
> SoCs. - Likely useful only with CONFIG_SATA_BRCMSTB enabled.
> -
> -config PHY_CYGNUS_PCIE
> - tristate "Broadcom Cygnus PCIe PHY driver"
> - depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
> - select GENERIC_PHY
> - default ARCH_BCM_CYGNUS
> - help
> - Enable this to support the Broadcom Cygnus PCIe PHY.
> - If unsure, say N.
> +menuconfig PHY_PLAT
> + bool "Platform Phy drivers"
> +
> +if PHY_PLAT
> +source "drivers/phy/bcom/Kconfig"
> +source "drivers/phy/hisi/Kconfig"
> +source "drivers/phy/marvell/Kconfig"
> +source "drivers/phy/qcom/Kconfig"
> +source "drivers/phy/rcar/Kconfig"
> +source "drivers/phy/rockchip/Kconfig"
> +source "drivers/phy/samsung/Kconfig"
> +source "drivers/phy/st/Kconfig"
> +source "drivers/phy/sunxi/Kconfig"
> +source "drivers/phy/ti/Kconfig"
> +endif
>
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 24596a9..73d563b 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -3,52 +3,19 @@
> #
>
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> -obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
> -obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> -obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
> -obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
> -obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
> -obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
> -obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
> -obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
> -obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
> -obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
> -obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
> -obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o
> -obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
> -obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
> -obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
> -obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
> -obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
> -obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
> -obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
> -obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
> -obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
> obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
> -obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
> -obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
> -obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
> -phy-exynos-usb2-y += phy-samsung-usb2.o
> -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
> -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
> -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
> -phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
> -obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
> -obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
> -obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
> -obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
> -obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
> -obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
> -obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
> -obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
> obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
> -obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
> -obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
> -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
> -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
> -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
> -obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
> -obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
> obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
> -obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
> +
> +# Phy drivers for different platforms.
> +obj-$(CONFIG_PHY_PLAT) += bcom/ \
> + hisi/ \
> + marvell/ \
> + qcom/ \
> + rcar/ \
> + rockchip/ \
> + samsung/ \
> + st/ \
> + sunxi/ \
> + ti/
> diff --git a/drivers/phy/bcom/Kconfig b/drivers/phy/bcom/Kconfig
> new file mode 100644
> index 0000000..8243372
> --- /dev/null
> +++ b/drivers/phy/bcom/Kconfig
> @@ -0,0 +1,27 @@
> +#
> +# PHY drivers for Broadcom platforms
> +#
> +config PHY_CYGNUS_PCIE
> + tristate "Broadcom Cygnus PCIe PHY driver"
> + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
> + select GENERIC_PHY
> + default ARCH_BCM_CYGNUS
> + help
> + Enable this to support the Broadcom Cygnus PCIe PHY.
> + If unsure, say N.
> +
> +config BCM_KONA_USB2_PHY
> + tristate "Broadcom Kona USB2 PHY Driver"
> + depends on HAS_IOMEM
> + select GENERIC_PHY
> + help
> + Enable this to support the Broadcom Kona USB 2.0 PHY.
> +
> +config PHY_BRCMSTB_SATA
> + tristate "Broadcom STB SATA PHY driver"
> + depends on ARCH_BRCMSTB || BMIPS_GENERIC
> + depends on OF
> + select GENERIC_PHY
> + help
> + Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB
> SoCs. + Likely useful only with CONFIG_SATA_BRCMSTB enabled.
> diff --git a/drivers/phy/bcom/Makefile b/drivers/phy/bcom/Makefile
> new file mode 100644
> index 0000000..f30fa76
> --- /dev/null
> +++ b/drivers/phy/bcom/Makefile
> @@ -0,0 +1,3 @@
> +obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
> +obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
> +obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
> diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c
> b/drivers/phy/bcom/phy-bcm-cygnus-pcie.c similarity index 100%
> rename from drivers/phy/phy-bcm-cygnus-pcie.c
> rename to drivers/phy/bcom/phy-bcm-cygnus-pcie.c
> diff --git a/drivers/phy/phy-bcm-kona-usb2.c
> b/drivers/phy/bcom/phy-bcm-kona-usb2.c similarity index 100%
> rename from drivers/phy/phy-bcm-kona-usb2.c
> rename to drivers/phy/bcom/phy-bcm-kona-usb2.c
> diff --git a/drivers/phy/phy-brcmstb-sata.c
> b/drivers/phy/bcom/phy-brcmstb-sata.c similarity index 100%
> rename from drivers/phy/phy-brcmstb-sata.c
> rename to drivers/phy/bcom/phy-brcmstb-sata.c
> diff --git a/drivers/phy/hisi/Kconfig b/drivers/phy/hisi/Kconfig
> new file mode 100644
> index 0000000..affa9ed
> --- /dev/null
> +++ b/drivers/phy/hisi/Kconfig
> @@ -0,0 +1,20 @@
> +#
> +# PHY drivers for HiSilicon platforms
> +#
> +config PHY_HIX5HD2_SATA
> + tristate "HIX5HD2 SATA PHY Driver"
> + depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
> + select GENERIC_PHY
> + select MFD_SYSCON
> + help
> + Support for SATA PHY on Hisilicon hix5hd2 Soc.
> +
> +config PHY_HI6220_USB
> + tristate "hi6220 USB PHY support"
> + depends on (ARCH_HISI && ARM64) || COMPILE_TEST
> + select GENERIC_PHY
> + select MFD_SYSCON
> + help
> + Enable this to support the HISILICON HI6220 USB PHY.
> +
> + To compile this driver as a module, choose M here.
> diff --git a/drivers/phy/hisi/Makefile b/drivers/phy/hisi/Makefile
> new file mode 100644
> index 0000000..6059ed8
> --- /dev/null
> +++ b/drivers/phy/hisi/Makefile
> @@ -0,0 +1,2 @@
> +obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
> +obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
> diff --git a/drivers/phy/phy-hi6220-usb.c
> b/drivers/phy/hisi/phy-hi6220-usb.c similarity index 100%
> rename from drivers/phy/phy-hi6220-usb.c
> rename to drivers/phy/hisi/phy-hi6220-usb.c
> diff --git a/drivers/phy/phy-hix5hd2-sata.c
> b/drivers/phy/hisi/phy-hix5hd2-sata.c similarity index 100%
> rename from drivers/phy/phy-hix5hd2-sata.c
> rename to drivers/phy/hisi/phy-hix5hd2-sata.c
> diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
> new file mode 100644
> index 0000000..6c1576c
> --- /dev/null
> +++ b/drivers/phy/marvell/Kconfig
> @@ -0,0 +1,50 @@
> +#
> +# PHY drivers for Marvell platforms
> +#
> +config ARMADA375_USBCLUSTER_PHY
> + def_bool y
> + depends on MACH_ARMADA_375 || COMPILE_TEST
> + depends on OF && HAS_IOMEM
> + select GENERIC_PHY
> +
> +config PHY_BERLIN_USB
> + tristate "Marvell Berlin USB PHY Driver"
> + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the USB PHY on Marvell Berlin SoCs.
> +
> +config PHY_BERLIN_SATA
> + tristate "Marvell Berlin SATA PHY driver"
> + depends on ARCH_BERLIN && HAS_IOMEM && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the SATA PHY on Marvell Berlin SoCs.
> +
> +config PHY_MVEBU_SATA
> + def_bool y
> + depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
> + depends on OF
> + select GENERIC_PHY
> +
> +config PHY_PXA_28NM_HSIC
> + tristate "Marvell USB HSIC 28nm PHY Driver"
> + depends on HAS_IOMEM
> + select GENERIC_PHY
> + help
> + Enable this to support Marvell USB HSIC PHY driver for Marvell
> + SoC. This driver will do the PHY initialization and shutdown.
> + The PHY driver will be used by Marvell ehci driver.
> +
> + To compile this driver as a module, choose M here.
> +
> +config PHY_PXA_28NM_USB2
> + tristate "Marvell USB 2.0 28nm PHY Driver"
> + depends on HAS_IOMEM
> + select GENERIC_PHY
> + help
> + Enable this to support Marvell USB 2.0 PHY driver for Marvell
> + SoC. This driver will do the PHY initialization and shutdown.
> + The PHY driver will be used by Marvell udc/ehci/otg driver.
> +
> + To compile this driver as a module, choose M here.
> diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
> new file mode 100644
> index 0000000..f4fa255
> --- /dev/null
> +++ b/drivers/phy/marvell/Makefile
> @@ -0,0 +1,6 @@
> +obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
> +obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
> +obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> +obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
> +obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
> +obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
> diff --git a/drivers/phy/phy-armada375-usb2.c
> b/drivers/phy/marvell/phy-armada375-usb2.c similarity index 100%
> rename from drivers/phy/phy-armada375-usb2.c
> rename to drivers/phy/marvell/phy-armada375-usb2.c
> diff --git a/drivers/phy/phy-berlin-sata.c
> b/drivers/phy/marvell/phy-berlin-sata.c similarity index 100%
> rename from drivers/phy/phy-berlin-sata.c
> rename to drivers/phy/marvell/phy-berlin-sata.c
> diff --git a/drivers/phy/phy-berlin-usb.c
> b/drivers/phy/marvell/phy-berlin-usb.c similarity index 100%
> rename from drivers/phy/phy-berlin-usb.c
> rename to drivers/phy/marvell/phy-berlin-usb.c
> diff --git a/drivers/phy/phy-mvebu-sata.c
> b/drivers/phy/marvell/phy-mvebu-sata.c similarity index 100%
> rename from drivers/phy/phy-mvebu-sata.c
> rename to drivers/phy/marvell/phy-mvebu-sata.c
> diff --git a/drivers/phy/phy-pxa-28nm-hsic.c
> b/drivers/phy/marvell/phy-pxa-28nm-hsic.c similarity index 100%
> rename from drivers/phy/phy-pxa-28nm-hsic.c
> rename to drivers/phy/marvell/phy-pxa-28nm-hsic.c
> diff --git a/drivers/phy/phy-pxa-28nm-usb2.c
> b/drivers/phy/marvell/phy-pxa-28nm-usb2.c similarity index 100%
> rename from drivers/phy/phy-pxa-28nm-usb2.c
> rename to drivers/phy/marvell/phy-pxa-28nm-usb2.c
> diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig
> new file mode 100644
> index 0000000..9718d01
> --- /dev/null
> +++ b/drivers/phy/qcom/Kconfig
> @@ -0,0 +1,23 @@
> +#
> +# PHY drivers for Qualcomm platforms
> +#
> +config PHY_QCOM_APQ8064_SATA
> + tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
> + depends on ARCH_QCOM
> + depends on HAS_IOMEM
> + depends on OF
> + select GENERIC_PHY
> +
> +config PHY_QCOM_IPQ806X_SATA
> + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
> + depends on ARCH_QCOM
> + depends on HAS_IOMEM
> + depends on OF
> + select GENERIC_PHY
> +
> +config PHY_QCOM_UFS
> + tristate "Qualcomm UFS PHY driver"
> + depends on OF && ARCH_QCOM
> + select GENERIC_PHY
> + help
> + Support for UFS PHY on QCOM chipsets.
> diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile
> new file mode 100644
> index 0000000..2db3e77
> --- /dev/null
> +++ b/drivers/phy/qcom/Makefile
> @@ -0,0 +1,5 @@
> +obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
> +obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
> +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o \
> + += phy-qcom-ufs-qmp-20nm.o \
> + += phy-qcom-ufs-qmp-14nm.o
> diff --git a/drivers/phy/phy-qcom-apq8064-sata.c
> b/drivers/phy/qcom/phy-qcom-apq8064-sata.c similarity index 100%
> rename from drivers/phy/phy-qcom-apq8064-sata.c
> rename to drivers/phy/qcom/phy-qcom-apq8064-sata.c
> diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c
> b/drivers/phy/qcom/phy-qcom-ipq806x-sata.c similarity index 100%
> rename from drivers/phy/phy-qcom-ipq806x-sata.c
> rename to drivers/phy/qcom/phy-qcom-ipq806x-sata.c
> diff --git a/drivers/phy/phy-qcom-ufs-i.h
> b/drivers/phy/qcom/phy-qcom-ufs-i.h similarity index 100%
> rename from drivers/phy/phy-qcom-ufs-i.h
> rename to drivers/phy/qcom/phy-qcom-ufs-i.h
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c
> b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c similarity index 100%
> rename from drivers/phy/phy-qcom-ufs-qmp-14nm.c
> rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h
> b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h similarity index 100%
> rename from drivers/phy/phy-qcom-ufs-qmp-14nm.h
> rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c
> b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c similarity index 100%
> rename from drivers/phy/phy-qcom-ufs-qmp-20nm.c
> rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h
> b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h similarity index 100%
> rename from drivers/phy/phy-qcom-ufs-qmp-20nm.h
> rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h
> diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/qcom/phy-qcom-ufs.c
> similarity index 100%
> rename from drivers/phy/phy-qcom-ufs.c
> rename to drivers/phy/qcom/phy-qcom-ufs.c
> diff --git a/drivers/phy/rcar/Kconfig b/drivers/phy/rcar/Kconfig
> new file mode 100644
> index 0000000..169b5e2
> --- /dev/null
> +++ b/drivers/phy/rcar/Kconfig
> @@ -0,0 +1,16 @@
> +#
> +# PHY drivers for Renesas's r-car platforms
> +#
> +config PHY_RCAR_GEN2
> + tristate "Renesas R-Car generation 2 USB PHY driver"
> + depends on ARCH_SHMOBILE
> + depends on GENERIC_PHY
> + help
> + Support for USB PHY found on Renesas R-Car generation 2 SoCs.
> +
> +config PHY_RCAR_GEN3_USB2
> + tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
> + depends on OF && ARCH_SHMOBILE
> + select GENERIC_PHY
> + help
> + Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
> diff --git a/drivers/phy/rcar/Makefile b/drivers/phy/rcar/Makefile
> new file mode 100644
> index 0000000..695241a
> --- /dev/null
> +++ b/drivers/phy/rcar/Makefile
> @@ -0,0 +1,2 @@
> +obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
> +obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
> diff --git a/drivers/phy/phy-rcar-gen2.c
> b/drivers/phy/rcar/phy-rcar-gen2.c similarity index 100%
> rename from drivers/phy/phy-rcar-gen2.c
> rename to drivers/phy/rcar/phy-rcar-gen2.c
> diff --git a/drivers/phy/phy-rcar-gen3-usb2.c
> b/drivers/phy/rcar/phy-rcar-gen3-usb2.c similarity index 100%
> rename from drivers/phy/phy-rcar-gen3-usb2.c
> rename to drivers/phy/rcar/phy-rcar-gen3-usb2.c
> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
> new file mode 100644
> index 0000000..c575d1e
> --- /dev/null
> +++ b/drivers/phy/rockchip/Kconfig
> @@ -0,0 +1,23 @@
> +#
> +# PHY drivers for Rockchip platforms
> +#
> +config PHY_ROCKCHIP_USB
> + tristate "Rockchip USB2 PHY Driver"
> + depends on ARCH_ROCKCHIP && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the Rockchip USB 2.0 PHY.
> +
> +config PHY_ROCKCHIP_EMMC
> + tristate "Rockchip EMMC PHY Driver"
> + depends on ARCH_ROCKCHIP && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the Rockchip EMMC PHY.
> +
> +config PHY_ROCKCHIP_DP
> + tristate "Rockchip Display Port PHY Driver"
> + depends on ARCH_ROCKCHIP && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the Rockchip Display Port PHY.
> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
> new file mode 100644
> index 0000000..c15acc1
> --- /dev/null
> +++ b/drivers/phy/rockchip/Makefile
> @@ -0,0 +1,3 @@
> +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
> +obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
> +obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
> diff --git a/drivers/phy/phy-rockchip-dp.c
> b/drivers/phy/rockchip/phy-rockchip-dp.c similarity index 100%
> rename from drivers/phy/phy-rockchip-dp.c
> rename to drivers/phy/rockchip/phy-rockchip-dp.c
> diff --git a/drivers/phy/phy-rockchip-emmc.c
> b/drivers/phy/rockchip/phy-rockchip-emmc.c similarity index 100%
> rename from drivers/phy/phy-rockchip-emmc.c
> rename to drivers/phy/rockchip/phy-rockchip-emmc.c
> diff --git a/drivers/phy/phy-rockchip-usb.c
> b/drivers/phy/rockchip/phy-rockchip-usb.c similarity index 100%
> rename from drivers/phy/phy-rockchip-usb.c
> rename to drivers/phy/rockchip/phy-rockchip-usb.c
> diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
> new file mode 100644
> index 0000000..80bdea7
> --- /dev/null
> +++ b/drivers/phy/samsung/Kconfig
> @@ -0,0 +1,87 @@
> +#
> +# PHY drivers for Samsung platforms
> +#
> +config PHY_SAMSUNG_USB2
> + tristate "Samsung USB 2.0 PHY driver"
> + depends on HAS_IOMEM
> + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
> + select GENERIC_PHY
> + select MFD_SYSCON
> + default ARCH_EXYNOS
> + help
> + Enable this to support the Samsung USB 2.0 PHY driver for Samsung
> + SoCs. This driver provides the interface for USB 2.0 PHY. Support
> + for particular PHYs will be enabled based on the SoC type in addition
> + to this driver.
> +
> +config PHY_S5PV210_USB2
> + bool "Support for S5PV210"
> + depends on PHY_SAMSUNG_USB2
> + depends on ARCH_S5PV210
> + help
> + Enable USB PHY support for S5PV210. This option requires that Samsung
> + USB 2.0 PHY driver is enabled and means that support for this
> + particular SoC is compiled in the driver. In case of S5PV210 two phys
> + are available - device and host.
> +
> +config PHY_EXYNOS4210_USB2
> + bool
> + depends on PHY_SAMSUNG_USB2
> + default CPU_EXYNOS4210
> +
> +config PHY_EXYNOS4X12_USB2
> + bool
> + depends on PHY_SAMSUNG_USB2
> + default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
> +
> +config PHY_EXYNOS5250_USB2
> + bool
> + depends on PHY_SAMSUNG_USB2
> + default SOC_EXYNOS5250 || SOC_EXYNOS5420
> +
> +config PHY_EXYNOS5_USBDRD
> + tristate "Exynos5 SoC series USB DRD PHY driver"
> + depends on ARCH_EXYNOS && OF
> + depends on HAS_IOMEM
> + depends on USB_DWC3_EXYNOS
> + select GENERIC_PHY
> + select MFD_SYSCON
> + default y
> + help
> + Enable USB DRD PHY support for Exynos 5 SoC series.
> + This driver provides PHY interface for USB 3.0 DRD controller
> + present on Exynos5 SoC series.
> +
> +config PHY_EXYNOS_DP_VIDEO
> + tristate "EXYNOS SoC series Display Port PHY driver"
> + depends on OF
> + depends on ARCH_EXYNOS || COMPILE_TEST
> + default ARCH_EXYNOS
> + select GENERIC_PHY
> + help
> + Support for Display Port PHY found on Samsung EXYNOS SoCs.
> +
> +config PHY_EXYNOS_MIPI_VIDEO
> + tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
> + depends on HAS_IOMEM
> + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> + select GENERIC_PHY
> + default y if ARCH_S5PV210 || ARCH_EXYNOS
> + help
> + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
> + and EXYNOS SoCs.
> +
> +config PHY_EXYNOS5250_SATA
> + tristate "Exynos5250 Sata SerDes/PHY driver"
> + depends on SOC_EXYNOS5250
> + depends on HAS_IOMEM
> + depends on OF
> + select GENERIC_PHY
> + select I2C
> + select I2C_S3C2410
> + select MFD_SYSCON
> + help
> + Enable this to support SATA SerDes/Phy found on Samsung's
> + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
> + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
> + port to accept one SATA device.
> diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
> new file mode 100644
> index 0000000..585dbd7
> --- /dev/null
> +++ b/drivers/phy/samsung/Makefile
> @@ -0,0 +1,10 @@
> +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
> +phy-exynos-usb2-y += phy-samsung-usb2.o
> +phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
> +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
> +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
> +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
> +obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
> +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
> +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> +obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
> diff --git a/drivers/phy/phy-exynos-dp-video.c
> b/drivers/phy/samsung/phy-exynos-dp-video.c similarity index 100%
> rename from drivers/phy/phy-exynos-dp-video.c
> rename to drivers/phy/samsung/phy-exynos-dp-video.c
> diff --git a/drivers/phy/phy-exynos-mipi-video.c
> b/drivers/phy/samsung/phy-exynos-mipi-video.c similarity index 100%
> rename from drivers/phy/phy-exynos-mipi-video.c
> rename to drivers/phy/samsung/phy-exynos-mipi-video.c
> diff --git a/drivers/phy/phy-exynos4210-usb2.c
> b/drivers/phy/samsung/phy-exynos4210-usb2.c similarity index 100%
> rename from drivers/phy/phy-exynos4210-usb2.c
> rename to drivers/phy/samsung/phy-exynos4210-usb2.c
> diff --git a/drivers/phy/phy-exynos4x12-usb2.c
> b/drivers/phy/samsung/phy-exynos4x12-usb2.c similarity index 100%
> rename from drivers/phy/phy-exynos4x12-usb2.c
> rename to drivers/phy/samsung/phy-exynos4x12-usb2.c
> diff --git a/drivers/phy/phy-exynos5-usbdrd.c
> b/drivers/phy/samsung/phy-exynos5-usbdrd.c similarity index 100%
> rename from drivers/phy/phy-exynos5-usbdrd.c
> rename to drivers/phy/samsung/phy-exynos5-usbdrd.c
> diff --git a/drivers/phy/phy-exynos5250-sata.c
> b/drivers/phy/samsung/phy-exynos5250-sata.c similarity index 100%
> rename from drivers/phy/phy-exynos5250-sata.c
> rename to drivers/phy/samsung/phy-exynos5250-sata.c
> diff --git a/drivers/phy/phy-exynos5250-usb2.c
> b/drivers/phy/samsung/phy-exynos5250-usb2.c similarity index 100%
> rename from drivers/phy/phy-exynos5250-usb2.c
> rename to drivers/phy/samsung/phy-exynos5250-usb2.c
> diff --git a/drivers/phy/phy-s5pv210-usb2.c
> b/drivers/phy/samsung/phy-s5pv210-usb2.c similarity index 100%
> rename from drivers/phy/phy-s5pv210-usb2.c
> rename to drivers/phy/samsung/phy-s5pv210-usb2.c
> diff --git a/drivers/phy/phy-samsung-usb2.c
> b/drivers/phy/samsung/phy-samsung-usb2.c similarity index 100%
> rename from drivers/phy/phy-samsung-usb2.c
> rename to drivers/phy/samsung/phy-samsung-usb2.c
> diff --git a/drivers/phy/phy-samsung-usb2.h
> b/drivers/phy/samsung/phy-samsung-usb2.h similarity index 100%
> rename from drivers/phy/phy-samsung-usb2.h
> rename to drivers/phy/samsung/phy-samsung-usb2.h
> diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig
> new file mode 100644
> index 0000000..651b2bf
> --- /dev/null
> +++ b/drivers/phy/st/Kconfig
> @@ -0,0 +1,51 @@
> +#
> +# PHY drivers for ST Micro platforms
> +#
> +config PHY_MIPHY28LP
> + tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
> + depends on ARCH_STI
> + select GENERIC_PHY
> + help
> + Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
> + that is part of STMicroelectronics STiH407 SoC.
> +
> +config PHY_MIPHY365X
> + tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
> + depends on ARCH_STI
> + depends on HAS_IOMEM
> + depends on OF
> + select GENERIC_PHY
> + help
> + Enable this to support the miphy transceiver (for SATA/PCIE)
> + that is part of STMicroelectronics STiH41x SoC series.
> +
> +config PHY_ST_SPEAR1310_MIPHY
> + tristate "ST SPEAR1310-MIPHY driver"
> + select GENERIC_PHY
> + depends on MACH_SPEAR1310 || COMPILE_TEST
> + help
> + Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
> +
> +config PHY_ST_SPEAR1340_MIPHY
> + tristate "ST SPEAR1340-MIPHY driver"
> + select GENERIC_PHY
> + depends on MACH_SPEAR1340 || COMPILE_TEST
> + help
> + Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
> +
> +config PHY_STIH407_USB
> + tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
> + depends on RESET_CONTROLLER
> + depends on ARCH_STI || COMPILE_TEST
> + select GENERIC_PHY
> + help
> + Enable this support to enable the picoPHY device used by USB2
> + and USB3 controllers on STMicroelectronics STiH407 SoC families.
> +
> +config PHY_STIH41X_USB
> + tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
> + depends on ARCH_STI
> + select GENERIC_PHY
> + help
> + Enable this to support the USB transceiver that is part of
> + STMicroelectronics STiH41x SoC series.
> diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile
> new file mode 100644
> index 0000000..907561b
> --- /dev/null
> +++ b/drivers/phy/st/Makefile
> @@ -0,0 +1,6 @@
> +obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
> +obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o
> +obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
> +obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
> +obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
> +obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
> diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
> similarity index 100%
> rename from drivers/phy/phy-miphy28lp.c
> rename to drivers/phy/st/phy-miphy28lp.c
> diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/st/phy-miphy365x.c
> similarity index 100%
> rename from drivers/phy/phy-miphy365x.c
> rename to drivers/phy/st/phy-miphy365x.c
> diff --git a/drivers/phy/phy-spear1310-miphy.c
> b/drivers/phy/st/phy-spear1310-miphy.c similarity index 100%
> rename from drivers/phy/phy-spear1310-miphy.c
> rename to drivers/phy/st/phy-spear1310-miphy.c
> diff --git a/drivers/phy/phy-spear1340-miphy.c
> b/drivers/phy/st/phy-spear1340-miphy.c similarity index 100%
> rename from drivers/phy/phy-spear1340-miphy.c
> rename to drivers/phy/st/phy-spear1340-miphy.c
> diff --git a/drivers/phy/phy-stih407-usb.c
> b/drivers/phy/st/phy-stih407-usb.c similarity index 100%
> rename from drivers/phy/phy-stih407-usb.c
> rename to drivers/phy/st/phy-stih407-usb.c
> diff --git a/drivers/phy/phy-stih41x-usb.c
> b/drivers/phy/st/phy-stih41x-usb.c similarity index 100%
> rename from drivers/phy/phy-stih41x-usb.c
> rename to drivers/phy/st/phy-stih41x-usb.c
> diff --git a/drivers/phy/sunxi/Kconfig b/drivers/phy/sunxi/Kconfig
> new file mode 100644
> index 0000000..eb06427
> --- /dev/null
> +++ b/drivers/phy/sunxi/Kconfig
> @@ -0,0 +1,28 @@
> +#
> +# PHY drivers for Allwinner's sunxi platforms
> +#
> +config PHY_SUN4I_USB
> + tristate "Allwinner sunxi SoC USB PHY driver"
> + depends on ARCH_SUNXI && HAS_IOMEM && OF
> + depends on RESET_CONTROLLER
> + depends on EXTCON
> + depends on POWER_SUPPLY
> + select GENERIC_PHY
> + help
> + Enable this to support the transceiver that is part of Allwinner
> + sunxi SoCs.
> +
> + This driver controls the entire USB PHY block, both the USB OTG
> + parts, as well as the 2 regular USB 2 host PHYs.
> +
> +config PHY_SUN9I_USB
> + tristate "Allwinner sun9i SoC USB PHY driver"
> + depends on ARCH_SUNXI && HAS_IOMEM && OF
> + depends on RESET_CONTROLLER
> + depends on USB_COMMON
> + select GENERIC_PHY
> + help
> + Enable this to support the transceiver that is part of Allwinner
> + sun9i SoCs.
> +
> + This driver controls each individual USB 2 host PHY.
> diff --git a/drivers/phy/sunxi/Makefile b/drivers/phy/sunxi/Makefile
> new file mode 100644
> index 0000000..8605529c
> --- /dev/null
> +++ b/drivers/phy/sunxi/Makefile
> @@ -0,0 +1,2 @@
> +obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
> +obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
> diff --git a/drivers/phy/phy-sun4i-usb.c
> b/drivers/phy/sunxi/phy-sun4i-usb.c similarity index 100%
> rename from drivers/phy/phy-sun4i-usb.c
> rename to drivers/phy/sunxi/phy-sun4i-usb.c
> diff --git a/drivers/phy/phy-sun9i-usb.c
> b/drivers/phy/sunxi/phy-sun9i-usb.c similarity index 100%
> rename from drivers/phy/phy-sun9i-usb.c
> rename to drivers/phy/sunxi/phy-sun9i-usb.c
> diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
> new file mode 100644
> index 0000000..1e3e307
> --- /dev/null
> +++ b/drivers/phy/ti/Kconfig
> @@ -0,0 +1,67 @@
> +#
> +# PHY drivers for TI platforms
> +#
> +config PHY_DM816X_USB
> + tristate "TI dm816x USB PHY driver"
> + depends on ARCH_OMAP2PLUS
> + depends on USB_SUPPORT
> + select GENERIC_PHY
> + select USB_PHY
> + help
> + Enable this for dm816x USB to work.
> +
> +config OMAP_CONTROL_PHY
> + tristate "OMAP CONTROL PHY Driver"
> + depends on ARCH_OMAP2PLUS || COMPILE_TEST
> + help
> + Enable this to add support for the PHY part present in the control
> + module. This driver has API to power on the USB2 PHY and to write to
> + the mailbox. The mailbox is present only in omap4 and the register to
> + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
> + additional register to power on USB3 PHY/SATA PHY/PCIE PHY
> + (PIPE3 PHY).
> +
> +config OMAP_USB2
> + tristate "OMAP USB2 PHY Driver"
> + depends on ARCH_OMAP2PLUS
> + depends on USB_SUPPORT
> + select GENERIC_PHY
> + select USB_PHY
> + select OMAP_CONTROL_PHY
> + depends on OMAP_OCP2SCP
> + help
> + Enable this to support the transceiver that is part of SOC. This
> + driver takes care of all the PHY functionality apart from comparator.
> + The USB OTG controller communicates with the comparator using this
> + driver.
> +
> +config TI_PIPE3
> + tristate "TI PIPE3 PHY Driver"
> + depends on ARCH_OMAP2PLUS || COMPILE_TEST
> + select GENERIC_PHY
> + select OMAP_CONTROL_PHY
> + depends on OMAP_OCP2SCP
> + help
> + Enable this to support the PIPE3 PHY that is part of TI SOCs. This
> + driver takes care of all the PHY functionality apart from comparator.
> + This driver interacts with the "OMAP Control PHY Driver" to power
> + on/off the PHY.
> +
> +config PHY_TUSB1210
> + tristate "TI TUSB1210 ULPI PHY module"
> + depends on USB_ULPI_BUS
> + select GENERIC_PHY
> + help
> + Support for TI TUSB1210 USB ULPI PHY.
> +
> +config TWL4030_USB
> + tristate "TWL4030 USB Transceiver Driver"
> + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
> + depends on USB_SUPPORT
> + select GENERIC_PHY
> + select USB_PHY
> + help
> + Enable this to support the USB OTG transceiver on TWL4030
> + family chips (including the TWL5030 and TPS659x0 devices).
> + This transceiver supports high and full speed devices plus,
> + in host mode, low speed.
> diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile
> new file mode 100644
> index 0000000..2d16f77
> --- /dev/null
> +++ b/drivers/phy/ti/Makefile
> @@ -0,0 +1,6 @@
> +obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
> +obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
> +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
> +obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
> +obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
> +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
> diff --git a/drivers/phy/phy-dm816x-usb.c
> b/drivers/phy/ti/phy-dm816x-usb.c similarity index 100%
> rename from drivers/phy/phy-dm816x-usb.c
> rename to drivers/phy/ti/phy-dm816x-usb.c
> diff --git a/drivers/phy/phy-omap-control.c
> b/drivers/phy/ti/phy-omap-control.c similarity index 100%
> rename from drivers/phy/phy-omap-control.c
> rename to drivers/phy/ti/phy-omap-control.c
> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
> similarity index 100%
> rename from drivers/phy/phy-omap-usb2.c
> rename to drivers/phy/ti/phy-omap-usb2.c
> diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
> similarity index 100%
> rename from drivers/phy/phy-ti-pipe3.c
> rename to drivers/phy/ti/phy-ti-pipe3.c
> diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c
> similarity index 100%
> rename from drivers/phy/phy-tusb1210.c
> rename to drivers/phy/ti/phy-tusb1210.c
> diff --git a/drivers/phy/phy-twl4030-usb.c
> b/drivers/phy/ti/phy-twl4030-usb.c similarity index 100%
> rename from drivers/phy/phy-twl4030-usb.c
> rename to drivers/phy/ti/phy-twl4030-usb.c
> diff --git a/drivers/phy/ulpi_phy.h b/drivers/phy/ti/ulpi_phy.h
> similarity index 100%
> rename from drivers/phy/ulpi_phy.h
> rename to drivers/phy/ti/ulpi_phy.h
