SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk is not used anymore so
remove it.
Signed-off-by: Ludovic Desroches <ludovic.desroc...@atmel.com>
---
drivers/mmc/host/sdhci.c | 2 --
drivers/mmc/host/sdhci.h | 5 -----
2 files changed, 7 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index abd34d1..0ca16ee 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1192,8 +1192,6 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned
int clock)
host->mmc->actual_clock = 0;
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
- if (host->quirks2 & SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST)
- mdelay(1);
if (clock == 0)
return;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 9db5090..0decc85 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -417,11 +417,6 @@ struct sdhci_host {
#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14)
/* Broken Clock divider zero in controller */
#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
-/*
- * When internal clock is disabled, a delay is needed before modifying the
- * SD clock frequency or enabling back the internal clock.
- */
-#define SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST (1<<16)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
2.5.0
