Hi Amitkumar,
> On some arm-based platforms, we need to configure platform specific
> parameters by device tree node and we need define our node as a child
> node of parent SDIO host controller.
> This patch parses these parameters from device tree. It includes
> calibration data download to firmware, wakeup pin configured to firmware,
> and soc specific wakeup interrupt pin.
>
> Signed-off-by: Xinming Hu <h...@marvell.com>
> Signed-off-by: Amitkumar Karwar <akar...@marvell.com>
> ---
> drivers/bluetooth/btmrvl_drv.h | 11 ++++++
> drivers/bluetooth/btmrvl_main.c | 33 +++++++++--------
> drivers/bluetooth/btmrvl_sdio.c | 79 +++++++++++++++++++++++++++++++++++++++++
> drivers/bluetooth/btmrvl_sdio.h | 6 ++++
> 4 files changed, 115 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
> index 0590473..f742384 100644
> --- a/drivers/bluetooth/btmrvl_drv.h
> +++ b/drivers/bluetooth/btmrvl_drv.h
> @@ -23,6 +23,17 @@
> #include <linux/bitops.h>
> #include <linux/slab.h>
> #include <net/bluetooth/bluetooth.h>
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/gfp.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/slab.h>
> +#include <linux/of_irq.h>
>
> #define BTM_HEADER_LEN 4
> #define BTM_UPLD_SIZE 2312
> diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
> index f25a825..25343ef 100644
> --- a/drivers/bluetooth/btmrvl_main.c
> +++ b/drivers/bluetooth/btmrvl_main.c
> @@ -510,34 +510,39 @@ static int btmrvl_download_cal_data(struct
> btmrvl_private *priv,
> static int btmrvl_check_device_tree(struct btmrvl_private *priv)
> {
> struct device_node *dt_node;
> + struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
> u8 cal_data[BT_CAL_HDR_LEN + BT_CAL_DATA_SIZE];
> - int ret;
> - u32 val;
> + int ret = 0;
> + u16 gpio, gap;
> +
> + if (card->plt_of_node) {
> + dt_node = card->plt_of_node;
> + ret = of_property_read_u16(dt_node, "btmrvl,wakeup-pin",
> + &gpio);
> + if (ret)
> + gpio = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8;
> +
> + ret = of_property_read_u16(dt_node, "btmrvl,wakeup-gap",
> + &gap);
> + if (ret)
> + gap = (u8)(priv->btmrvl_dev.gpio_gap & 0x00ff);
>
> - for_each_compatible_node(dt_node, NULL, "btmrvl,cfgdata") {
> - ret = of_property_read_u32(dt_node, "btmrvl,gpio-gap", &val);
> - if (!ret)
> - priv->btmrvl_dev.gpio_gap = val;
> + priv->btmrvl_dev.gpio_gap = (gpio << 8) + gap;
>
> ret = of_property_read_u8_array(dt_node, "btmrvl,cal-data",
> cal_data + BT_CAL_HDR_LEN,
> BT_CAL_DATA_SIZE);
> - if (ret) {
> - of_node_put(dt_node);
> + if (ret)
> return ret;
> - }
>
> BT_DBG("Use cal data from device tree");
> ret = btmrvl_download_cal_data(priv, cal_data,
> BT_CAL_DATA_SIZE);
> - if (ret) {
> + if (ret)
> BT_ERR("Fail to download calibrate data");
> - of_node_put(dt_node);
> - return ret;
> - }
> }
>
> - return 0;
> + return ret;
> }
>
> static int btmrvl_setup(struct hci_dev *hdev)
> diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
> index 6ed8acf..c714040 100644
> --- a/drivers/bluetooth/btmrvl_sdio.c
> +++ b/drivers/bluetooth/btmrvl_sdio.c
> @@ -52,6 +52,68 @@ static struct memory_type_mapping mem_type_mapping_tbl[] =
> {
> {"EXTLAST", NULL, 0, 0xFE},
> };
>
> +static const struct of_device_id btmrvl_sdio_of_match_table[] = {
> + { .compatible = "marvell,sd8897-bt" },
> + { .compatible = "marvell,sd8997-bt" },
> + { }
> +};
is this agreed upon by the DT maintainer? I only want to merge this patch if we
have agreement.
Regards
Marcel
