On Thu, 2016-04-28 at 18:26 +0200, Stefan Wahren wrote: > Hi Olivier > > Am 28.04.2016 um 14:52 schrieb Olivier Blin: > > > > Stephen Warren <swar...@wwwdotorg.org> writes: > > > > > > > > On 02/04/2016 12:36 AM, Lubomir Rintel wrote: > > > > > > > > The hub and the ethernet in its port 1 are hardwired on the > > > > board. > > > > > > > > Compared to the adapters that can be plugged into the USB > > > > ports, this > > > > one has no serial EEPROM to store its MAC. Nevertheless, the > > > > Raspberry Pi > > > > has the MAC address for this adapter in its ROM, accessible > > > > from its > > > > firmware. > > > > > > > > U-Boot can read out the address and set the local-mac-address > > > > property of the > > > > node with "ethernet" alias. Let's add the node so that U-Boot > > > > can do its > > > > business. > > > > > > > > Model B rev2 and Model B+ entries were verified by me, the > > > > hierarchy and > > > > pid/vid pair for the Version 2 was provided by Olivier Blin. > > > > Original > > > > Model B is a blind short, though very likely correct. > > > The series, > > > Tested-by: Stephen Warren <swar...@wwwdotorg.org> > > > > > > A few nits though... > > [...] > > > > Is this still being queued in some tree? > > Or does it need more fixes and a resubmit? > Yes, a V3 should address the comments from Peter and Stephen.
I'll follow up with an updated patch set. Sorry for the delay. > > Regards > Stefan > > > > > > > Without this, Raspberry Pi devices boot with a random MAC address. > > >
