Hi,

Roger Quadros <[email protected]> writes:
> We intend to share this interrupt with the OTG driver an to ensure
> that irqflags match for the shared interrupt handlers we use
> request_threaded_irq()
>
> If we don't use request_treaded_irq() then forced threaded irq will
> set IRQF_ONESHOT and this won't match with the OTG IRQ handler's
> IRQ flags.
>
> NOTE: OTG IRQ handler is yet to be added. This is a preparatory step.
>
> Signed-off-by: Roger Quadros <[email protected]>
> ---
>  drivers/usb/dwc3/dwc3-omap.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
> index 59ea35f..6504e94 100644
> --- a/drivers/usb/dwc3/dwc3-omap.c
> +++ b/drivers/usb/dwc3/dwc3-omap.c
> @@ -272,16 +272,22 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void 
> *_omap)
>  {
>       struct dwc3_omap        *omap = _omap;
>       u32                     reg;
> +     int                     ret = IRQ_NONE;
>  
>       reg = dwc3_omap_read_irqmisc_status(omap);
>  
> +     if (reg)
> +             ret = IRQ_HANDLED;
> +
>       dwc3_omap_write_irqmisc_status(omap, reg);
>  
>       reg = dwc3_omap_read_irq0_status(omap);
> +     if (reg)
> +             ret = IRQ_HANDLED;
>  
>       dwc3_omap_write_irq0_status(omap, reg);
>  
> -     return IRQ_HANDLED;
> +     return ret;
>  }
>  
>  static void dwc3_omap_enable_irqs(struct dwc3_omap *omap)
> @@ -497,8 +503,8 @@ static int dwc3_omap_probe(struct platform_device *pdev)
>       /* check the DMA Status */
>       reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
>  
> -     ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0,
> -                     "dwc3-omap", omap);
> +     ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
> +                                     NULL, 0, "dwc3-omap", omap);

if you're using threaded_irq, it's better to have a NULL top half and
valid bottom half.

In fact, since this will be shared, you could do a proper preparation
and on top half check if $this device generated the IRQ and
conditionally schedule the bottom half. Don't forget to mask device's
interrupts from top half so you can run without IRQF_ONESHOT.

-- 
balbi

Attachment: signature.asc
Description: PGP signature

Reply via email to