Add description for the SDHCI v5.1 eMMC controller on rk3399. Fix it to 200 MHz, to support all supported timing modes.
Note that 'rockchip,rk3399-sdhci-5.1' is not documented; we presumably have a compliant Arasan controller, but let's have a rockchip property as the canonical backup/precautionary measure. Per Heiko's previous suggestion, let's not clutter the arasan doc with it. Signed-off-by: Brian Norris <[email protected]> --- v2: * improved commit message * assign eMMC clock to 200 MHz arch/arm64/boot/dts/rockchip/rk3399.dtsi | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 46f325a143b0..9980c2eab4e9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -215,6 +215,19 @@ status = "disabled"; }; + sdhci: sdhci@fe330000 { + compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; + reg = <0x0 0xfe330000 0x0 0x10000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>; + clock-names = "clk_xin", "clk_ahb"; + assigned-clocks = <&cru SCLK_EMMC>; + assigned-clock-rates = <200000000>; + phys = <&emmc_phy>; + phy-names = "phy_arasan"; + status = "disabled"; + }; + usb_host0_ehci: usb@fe380000 { compatible = "generic-ehci"; reg = <0x0 0xfe380000 0x0 0x20000>; @@ -481,8 +494,18 @@ }; grf: syscon@ff770000 { - compatible = "rockchip,rk3399-grf", "syscon"; + compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; reg = <0x0 0xff770000 0x0 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + + emmc_phy: phy@f780 { + compatible = "rockchip,rk3399-emmc-phy"; + reg = <0xf780 0x20>; + #phy-cells = <0>; + status = "disabled"; + }; }; watchdog@ff840000 { -- 2.8.0.rc3.226.g39d4020
