[PATCH v2] ARM64: zynqmp: Use 64bit size cell format

[Michal Simek]

Use 64bit size cell format instead of 32bit for memory
description.

Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

Changes in v2:
- Use ranges for PS amba busses instead of changing them to
  64 size cell

 arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi      | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts 
b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index acb0527fdc4a..358089687a69 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -29,7 +29,7 @@
 
        memory {
                device_type = "memory";
-               reg = <0x0 0x0 0x40000000>;
+               reg = <0x0 0x0 0x0 0x40000000>;
        };
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi 
b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 38c43103d610..cb8f09cb03cf 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -14,7 +14,7 @@
 / {
        compatible = "xlnx,zynqmp";
        #address-cells = <2>;
-       #size-cells = <1>;
+       #size-cells = <2>;
 
        cpus {
                #address-cells = <1>;
@@ -75,7 +75,7 @@
                compatible = "simple-bus";
                #address-cells = <2>;
                #size-cells = <1>;
-               ranges;
+               ranges = <0 0 0 0 0xffffffff>;
 
                gic: interrupt-controller@f9010000 {
                        compatible = "arm,gic-400", "arm,cortex-a15-gic";
@@ -94,7 +94,7 @@
                compatible = "simple-bus";
                #address-cells = <2>;
                #size-cells = <1>;
-               ranges;
+               ranges = <0 0 0 0 0xffffffff>;
 
                can0: can@ff060000 {
                        compatible = "xlnx,zynq-can-1.0";
-- 
1.9.1