I've tested a pristine 4.6.0 system, so it's definitely something that
went in during the merge window. The flicker isn't continuous, it's
periodic, with an interval of something like 2-5 seconds. It looks
like an old analogue TV going out of sync and then resyncing. I've
attached the dmesg and X.org log below just in case they can help. I
might be able to bisect this next week, but, unfortunately, this is my
current laptop and I'm travelling this week.
James
[ 13.504]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 13.504] X Protocol Version 11, Revision 0
[ 13.504] Build Operating System: openSUSE SUSE LINUX
[ 13.504] Current Operating System: Linux jarvis 4.7.0-rc1+ #1 SMP PREEMPT Mon May 30 12:29:53 PDT 2016 x86_64
[ 13.504] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2 splash=silent quiet showopts pcie_aspm=force
[ 13.504] Build Date: 07 March 2016 08:22:28AM
[ 13.504]
[ 13.504] Current version of pixman: 0.32.6
[ 13.504] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.504] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.504] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 30 12:40:53 2016
[ 13.504] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.504] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.504] (==) No Layout section. Using the first Screen section.
[ 13.504] (==) No screen section available. Using defaults.
[ 13.504] (**) |-->Screen "Default Screen Section" (0)
[ 13.504] (**) | |-->Monitor "<default monitor>"
[ 13.505] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.505] (==) Automatically adding devices
[ 13.505] (==) Automatically enabling devices
[ 13.505] (==) Automatically adding GPU devices
[ 13.509] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 13.509] Entry deleted from font path.
[ 13.509] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 13.509] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 13.509] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.509] (II) Loader magic: 0x80dd00
[ 13.509] (II) Module ABI versions:
[ 13.509] X.Org ANSI C Emulation: 0.4
[ 13.509] X.Org Video Driver: 19.0
[ 13.509] X.Org XInput driver : 21.0
[ 13.509] X.Org Server Extension : 9.0
[ 13.509] (++) using VT number 7
[ 13.509] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 13.510] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.925] (--) PCI:*(0:0:2:0) 8086:1916:1028:0704 rev 7, Mem @ 0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 13.925] (II) LoadModule: "glx"
[ 13.926] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 13.930] (II) Module glx: vendor="X.Org Foundation"
[ 13.930] compiled for 1.17.2, module version = 1.0.0
[ 13.931] ABI class: X.Org Server Extension, version 9.0
[ 13.931] (==) AIGLX enabled
[ 13.931] (==) Matched intel as autoconfigured driver 0
[ 13.931] (==) Matched intel as autoconfigured driver 1
[ 13.931] (==) Matched modesetting as autoconfigured driver 2
[ 13.931] (==) Matched fbdev as autoconfigured driver 3
[ 13.931] (==) Matched vesa as autoconfigured driver 4
[ 13.931] (==) Assigned the driver to the xf86ConfigLayout
[ 13.931] (II) LoadModule: "intel"
[ 13.931] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 13.932] (II) Module intel: vendor="X.Org Foundation"
[ 13.932] compiled for 1.17.2, module version = 2.99.917
[ 13.932] Module class: X.Org Video Driver
[ 13.932] ABI class: X.Org Video Driver, version 19.0
[ 13.932] (II) LoadModule: "modesetting"
[ 13.932] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 13.932] (II) Module modesetting: vendor="X.Org Foundation"
[ 13.932] compiled for 1.17.2, module version = 1.17.2
[ 13.932] Module class: X.Org Video Driver
[ 13.932] ABI class: X.Org Video Driver, version 19.0
[ 13.932] (II) LoadModule: "fbdev"
[ 13.933] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 13.933] (II) Module fbdev: vendor="X.Org Foundation"
[ 13.933] compiled for 1.17.2, module version = 0.4.4
[ 13.933] Module class: X.Org Video Driver
[ 13.933] ABI class: X.Org Video Driver, version 19.0
[ 13.933] (II) LoadModule: "vesa"
[ 13.933] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 13.933] (II) Module vesa: vendor="X.Org Foundation"
[ 13.933] compiled for 1.17.2, module version = 2.3.4
[ 13.933] Module class: X.Org Video Driver
[ 13.933] ABI class: X.Org Video Driver, version 19.0
[ 13.933] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 13.934] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 13.934] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 13.934] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 13.934] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 13.934] (II) FBDEV: driver for framebuffer: fbdev
[ 13.934] (II) VESA: driver for VESA chipsets: vesa
[ 13.934] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160425
[ 13.935] (WW) Falling back to old probe method for modesetting
[ 13.935] (WW) Falling back to old probe method for fbdev
[ 13.935] (II) Loading sub module "fbdevhw"
[ 13.935] (II) LoadModule: "fbdevhw"
[ 13.935] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 13.935] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 13.935] compiled for 1.17.2, module version = 0.0.2
[ 13.935] ABI class: X.Org Video Driver, version 19.0
[ 13.935] (WW) Falling back to old probe method for vesa
[ 13.936] (--) intel(0): gen9 engineering sample
[ 13.936] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 13.936] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.936] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.936] (==) intel(0): RGB weight 888
[ 13.936] (==) intel(0): Default visual is TrueColor
[ 13.937] (II) intel(0): Output eDP1 has no monitor section
[ 13.952] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 13.952] (II) intel(0): Enabled output eDP1
[ 13.952] (II) intel(0): Output DP1 has no monitor section
[ 13.952] (II) intel(0): Enabled output DP1
[ 13.952] (II) intel(0): Output HDMI1 has no monitor section
[ 13.952] (II) intel(0): Enabled output HDMI1
[ 13.952] (II) intel(0): Output DP2 has no monitor section
[ 13.952] (II) intel(0): Enabled output DP2
[ 13.952] (II) intel(0): Output HDMI2 has no monitor section
[ 13.952] (II) intel(0): Enabled output HDMI2
[ 13.952] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 13.953] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 13.953] (II) intel(0): Enabled output VIRTUAL1
[ 13.953] (--) intel(0): Output eDP1 using initial mode 3200x1800 on pipe 0
[ 13.953] (==) intel(0): TearFree disabled
[ 13.953] (==) intel(0): DPI set to (96, 96)
[ 13.953] (II) Loading sub module "dri2"
[ 13.953] (II) LoadModule: "dri2"
[ 13.953] (II) Module "dri2" already built-in
[ 13.953] (II) Loading sub module "present"
[ 13.953] (II) LoadModule: "present"
[ 13.953] (II) Module "present" already built-in
[ 13.953] (II) UnloadModule: "modesetting"
[ 13.953] (II) Unloading modesetting
[ 13.953] (II) UnloadModule: "fbdev"
[ 13.953] (II) Unloading fbdev
[ 13.953] (II) UnloadSubModule: "fbdevhw"
[ 13.953] (II) Unloading fbdevhw
[ 13.953] (II) UnloadModule: "vesa"
[ 13.953] (II) Unloading vesa
[ 13.953] (==) Depth 24 pixmap format is 32 bpp
[ 13.954] (II) intel(0): SNA initialized with generic backend
[ 13.954] (==) intel(0): Backing store enabled
[ 13.954] (==) intel(0): Silken mouse enabled
[ 13.954] (II) intel(0): HW Cursor enabled
[ 13.954] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 13.954] (==) intel(0): DPMS enabled
[ 13.954] (==) intel(0): display hotplug detection enabled
[ 13.954] (II) intel(0): Textured video not supported on this hardware
[ 13.954] (II) intel(0): [DRI2] Setup complete
[ 13.954] (II) intel(0): [DRI2] DRI driver: i965
[ 13.954] (II) intel(0): [DRI2] VDPAU driver: i965
[ 13.954] (II) intel(0): direct rendering: DRI2 enabled
[ 13.954] (II) intel(0): hardware support for Present enabled
[ 13.954] (--) RandR disabled
[ 13.988] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 13.988] (II) AIGLX: enabled GLX_ARB_create_context
[ 13.988] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 13.988] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 13.988] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 13.988] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 13.988] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 13.988] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 13.988] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 13.988] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 13.988] (II) AIGLX: Loaded and initialized i965
[ 13.988] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.001] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 14.014] (II) intel(0): Setting screen physical size to 846 x 476
[ 14.077] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 14.077] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.077] (**) Power Button: Applying InputClass "system-keyboard"
[ 14.077] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.077] (II) LoadModule: "evdev"
[ 14.077] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 14.078] (II) Module evdev: vendor="X.Org Foundation"
[ 14.078] compiled for 1.17.2, module version = 2.9.2
[ 14.078] Module class: X.Org XInput Driver
[ 14.078] ABI class: X.Org XInput driver, version 21.0
[ 14.078] (II) Using input driver 'evdev' for 'Power Button'
[ 14.078] (**) Power Button: always reports core events
[ 14.078] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 14.078] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.078] (--) evdev: Power Button: Found keys
[ 14.078] (II) evdev: Power Button: Configuring as keyboard
[ 14.078] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[ 14.078] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.078] (**) Option "xkb_rules" "evdev"
[ 14.078] (**) Option "xkb_model" "pc104"
[ 14.078] (**) Option "xkb_layout" "us"
[ 14.093] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 14.093] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 14.093] (**) Video Bus: Applying InputClass "system-keyboard"
[ 14.093] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 14.093] (II) Using input driver 'evdev' for 'Video Bus'
[ 14.093] (**) Video Bus: always reports core events
[ 14.093] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 14.093] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 14.093] (--) evdev: Video Bus: Found keys
[ 14.093] (II) evdev: Video Bus: Configuring as keyboard
[ 14.093] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event6"
[ 14.093] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 14.093] (**) Option "xkb_rules" "evdev"
[ 14.093] (**) Option "xkb_model" "pc104"
[ 14.093] (**) Option "xkb_layout" "us"
[ 14.093] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 14.093] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.093] (**) Power Button: Applying InputClass "system-keyboard"
[ 14.093] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.093] (II) Using input driver 'evdev' for 'Power Button'
[ 14.093] (**) Power Button: always reports core events
[ 14.093] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 14.093] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.093] (--) evdev: Power Button: Found keys
[ 14.093] (II) evdev: Power Button: Configuring as keyboard
[ 14.093] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 14.093] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 14.093] (**) Option "xkb_rules" "evdev"
[ 14.093] (**) Option "xkb_model" "pc104"
[ 14.093] (**) Option "xkb_layout" "us"
[ 14.094] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 14.094] (II) No input driver specified, ignoring this device.
[ 14.094] (II) This device may have been added with another device file.
[ 14.094] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 14.094] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 14.094] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 14.094] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 14.094] (II) Using input driver 'evdev' for 'Sleep Button'
[ 14.094] (**) Sleep Button: always reports core events
[ 14.094] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 14.094] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 14.094] (--) evdev: Sleep Button: Found keys
[ 14.094] (II) evdev: Sleep Button: Configuring as keyboard
[ 14.094] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[ 14.094] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 14.094] (**) Option "xkb_rules" "evdev"
[ 14.094] (**) Option "xkb_model" "pc104"
[ 14.094] (**) Option "xkb_layout" "us"
[ 14.094] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event14)
[ 14.094] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 14.094] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 14.094] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[ 14.094] (**) ELAN Touchscreen: always reports core events
[ 14.094] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event14"
[ 14.094] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x20d0
[ 14.094] (--) evdev: ELAN Touchscreen: Found absolute axes
[ 14.094] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[ 14.094] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[ 14.094] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[ 14.094] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[ 14.094] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[ 14.094] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[ 14.094] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.094] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0001/input/input15/event14"
[ 14.094] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 10)
[ 14.095] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[ 14.095] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[ 14.095] (**) ELAN Touchscreen: (accel) acceleration profile 0
[ 14.095] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 14.095] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 14.095] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[ 14.095] (II) No input driver specified, ignoring this device.
[ 14.095] (II) This device may have been added with another device file.
[ 14.095] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event16)
[ 14.095] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 14.095] (**) Integrated_Webcam_HD: Applying InputClass "system-keyboard"
[ 14.095] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 14.095] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[ 14.095] (**) Integrated_Webcam_HD: always reports core events
[ 14.095] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event16"
[ 14.095] (--) evdev: Integrated_Webcam_HD: Vendor 0xbda Product 0x5682
[ 14.095] (--) evdev: Integrated_Webcam_HD: Found keys
[ 14.095] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[ 14.095] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19/event16"
[ 14.095] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[ 14.095] (**) Option "xkb_rules" "evdev"
[ 14.095] (**) Option "xkb_model" "pc104"
[ 14.095] (**) Option "xkb_layout" "us"
[ 14.095] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/event15)
[ 14.095] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "evdev touchpad catchall"
[ 14.095] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "evdev touchpad catchall"
[ 14.095] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "touchpad catchall"
[ 14.095] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "Default clickpad buttons"
[ 14.096] (II) LoadModule: "synaptics"
[ 14.096] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 14.096] (II) Module synaptics: vendor="X.Org Foundation"
[ 14.096] compiled for 1.17.2, module version = 1.8.2
[ 14.096] Module class: X.Org XInput Driver
[ 14.096] ABI class: X.Org XInput driver, version 21.0
[ 14.096] (II) Using input driver 'synaptics' for 'DLL0704:01 06CB:76AE Touchpad'
[ 14.096] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events
[ 14.096] (**) Option "Device" "/dev/input/event15"
[ 14.252] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: found clickpad property
[ 14.252] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: x-axis range 0 - 1216 (res 12)
[ 14.252] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: y-axis range 0 - 680 (res 12)
[ 14.252] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report pressure, will use touch data.
[ 14.253] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report finger width.
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: buttons: left double triple
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: Vendor 0x6cb Product 0x76ae
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid pressure range. defaulting to 0 - 255
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid finger width range. defaulting to 0 - 15
[ 14.253] (**) Option "HorizEdgeScroll" "off"
[ 14.253] (**) Option "TapButton1" "1"
[ 14.253] (**) Option "TapButton2" "3"
[ 14.253] (**) Option "TapButton3" "2"
[ 14.253] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 14.253] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found
[ 14.253] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events
[ 14.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL0704:01/0018:06CB:76AE.0002/input/input17/event15"
[ 14.292] (II) XINPUT: Adding extended input device "DLL0704:01 06CB:76AE Touchpad" (type: TOUCHPAD, id 12)
[ 14.292] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 14.292] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MaxSpeed is now 1.75
[ 14.292] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) AccelFactor is now 0.144
[ 14.292] (**) DLL0704:01 06CB:76AE Touchpad: (accel) keeping acceleration scheme 1
[ 14.292] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration profile 1
[ 14.292] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration factor: 2.000
[ 14.292] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration threshold: 4
[ 14.293] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found
[ 14.293] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/mouse2)
[ 14.293] (**) DLL0704:01 06CB:76AE Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 14.294] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event9)
[ 14.294] (II) No input driver specified, ignoring this device.
[ 14.294] (II) This device may have been added with another device file.
[ 14.295] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 14.295] (II) No input driver specified, ignoring this device.
[ 14.295] (II) This device may have been added with another device file.
[ 14.295] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[ 14.295] (II) No input driver specified, ignoring this device.
[ 14.295] (II) This device may have been added with another device file.
[ 14.296] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[ 14.296] (II) No input driver specified, ignoring this device.
[ 14.296] (II) This device may have been added with another device file.
[ 14.297] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 14.297] (II) No input driver specified, ignoring this device.
[ 14.297] (II) This device may have been added with another device file.
[ 14.297] (II) config/udev: Adding input device Intel HID events (/dev/input/event7)
[ 14.297] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[ 14.298] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 14.298] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[ 14.298] (II) Using input driver 'evdev' for 'Intel HID events'
[ 14.298] (**) Intel HID events: always reports core events
[ 14.298] (**) evdev: Intel HID events: Device: "/dev/input/event7"
[ 14.298] (--) evdev: Intel HID events: Vendor 0 Product 0
[ 14.298] (--) evdev: Intel HID events: Found keys
[ 14.298] (II) evdev: Intel HID events: Configuring as keyboard
[ 14.298] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input8/event7"
[ 14.298] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 13)
[ 14.298] (**) Option "xkb_rules" "evdev"
[ 14.298] (**) Option "xkb_model" "pc104"
[ 14.298] (**) Option "xkb_layout" "us"
[ 14.299] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 14.299] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.299] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 14.299] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.299] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.299] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.299] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 14.300] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 14.302] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 14.302] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.303] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 14.303] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 14.303] (**) Option "xkb_rules" "evdev"
[ 14.303] (**) Option "xkb_model" "pc104"
[ 14.303] (**) Option "xkb_layout" "us"
[ 14.304] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 14.304] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 14.304] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 14.304] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 14.304] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 14.304] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 14.304] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 14.304] (**) Option "Device" "/dev/input/event1"
[ 14.368] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1276 - 5666 (res 0)
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1118 - 4734 (res 0)
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 14.368] (**) Option "HorizEdgeScroll" "off"
[ 14.368] (**) Option "TapButton1" "1"
[ 14.368] (**) Option "TapButton2" "3"
[ 14.368] (**) Option "TapButton3" "2"
[ 14.368] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 14.368] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 14.368] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 14.400] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 14.400] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 14.400] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 14.400] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 14.400] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 14.400] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 14.400] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 14.400] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 14.400] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 14.400] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 14.401] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 14.401] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 14.401] (II) config/udev: Adding input device PC Speaker (/dev/input/event13)
[ 14.401] (II) No input driver specified, ignoring this device.
[ 14.401] (II) This device may have been added with another device file.
[ 30.805] (II) intel(0): EDID vendor "SHP", prod id 5194
[ 30.806] (II) intel(0): Printing DDC gathered Modelines:
[ 30.806] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 30.806] (II) intel(0): Modeline "3200x1800"x0.0 298.60 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (88.9 kHz e)
[ 0.000000] Linux version 4.7.0-rc1+ (jejb@jarvis) (gcc version 4.8.5 (SUSE
Linux) ) #1 SMP PREEMPT Mon May 30 12:29:53 PDT 2016
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-test
root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2
splash=silent quiet showopts pcie_aspm=force
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088
bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000069537fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000069538000-0x0000000069538fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000069539000-0x0000000069562fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000069563000-0x00000000695bdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000695be000-0x0000000069daefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000069daf000-0x000000007907dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007907e000-0x00000000793f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000793f9000-0x0000000079448fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000079449000-0x0000000079c00fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079c01000-0x000000007a4fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a4ff000-0x000000007a4fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a500000-0x000000007a5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x67823018-0x67833057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff]
reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000001000-0x0000000000057fff]
usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff]
reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff]
usable
[ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009ffff]
reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000067823017]
usable
[ 0.000000] reserve setup_data: [mem 0x0000000067823018-0x0000000067833057]
usable
[ 0.000000] reserve setup_data: [mem 0x0000000067833058-0x0000000069537fff]
usable
[ 0.000000] reserve setup_data: [mem 0x0000000069538000-0x0000000069538fff]
ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000069539000-0x0000000069562fff]
reserved
[ 0.000000] reserve setup_data: [mem 0x0000000069563000-0x00000000695bdfff]
usable
[ 0.000000] reserve setup_data: [mem 0x00000000695be000-0x0000000069daefff]
reserved
[ 0.000000] reserve setup_data: [mem 0x0000000069daf000-0x000000007907dfff]
usable
[ 0.000000] reserve setup_data: [mem 0x000000007907e000-0x00000000793f8fff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000793f9000-0x0000000079448fff]
ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000079449000-0x0000000079c00fff]
ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000079c01000-0x000000007a4fefff]
reserved
[ 0.000000] reserve setup_data: [mem 0x000000007a4ff000-0x000000007a4fffff]
usable
[ 0.000000] reserve setup_data: [mem 0x000000007a500000-0x000000007a5fffff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000027effffff]
usable
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x7941a000 ACPI 2.0=0x7941a000 SMBIOS=0xf0000
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9350/07TYC2, BIOS 1.3.3 03/01/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007B800000 mask 7FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7a500 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x0205d000, 0x0205dfff] PGTABLE
[ 0.000000] BRK [0x0205e000, 0x0205efff] PGTABLE
[ 0.000000] BRK [0x0205f000, 0x0205ffff] PGTABLE
[ 0.000000] BRK [0x02060000, 0x02060fff] PGTABLE
[ 0.000000] BRK [0x02061000, 0x02061fff] PGTABLE
[ 0.000000] BRK [0x02062000, 0x02062fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x2f71f000-0x2ff92fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007941A000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000007941A0B8 0000EC (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007943A840 00010C (v05 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007941A230 02060D (v02 DELL CBX3
01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x0000000079C00F80 000040
[ 0.000000] ACPI: APIC 0x000000007943A950 000084 (v03 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007943A9D8 000044 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007943AA20 00009C (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007943AAC0 00003C (v01 DELL CBX3
01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007943AB00 000038 (v01 DELL CBX3
01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x000000007943AB38 000315 (v01 SataRe SataTabl
00001000 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x000000007943AE50 000094 (v01 INTEL SKL-ULT
00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007943AEE8 000248 (v02 INTEL sensrhub
00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007943B130 002BAE (v02 INTEL PtidDevc
00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007943DCE0 000BE3 (v02 INTEL Ther_Rvp
00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x000000007943E8C8 000034 (v01 INTEL
00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000007943E900 000054 (v00 INTEL
00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007943E958 000737 (v02 INTEL xh_rvp07
00000000 INTL 20120913)
[ 0.000000] ACPI: BOOT 0x000000007943F090 000028 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007943F0B8 0035AE (v02 SaSsdt SaSsdt
00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x0000000079442668 000042 (v01
00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000794426B0 000E73 (v02 CpuRef CpuSsdt
00003000 INTL 20120913)
[ 0.000000] ACPI: MSDM 0x0000000079443528 000055 (v03 DELL CBX3
06222004 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x0000000079443580 003AE3 (v02 DptfTa DptfTabl
00001000 INTL 20120913)
[ 0.000000] ACPI: SLIC 0x0000000079447068 000176 (v03 DELL CBX3
01072009 MSFT 00010013)
[ 0.000000] ACPI: TCPA 0x00000000794471E0 000032 (v02 ALASKA NAPAASF
00000001 MSFT 01000013)
[ 0.000000] ACPI: BGRT 0x0000000079447218 000038 (v00 ?\xffffffcdq{
01072009 AMI 00010013)
[ 0.000000] ACPI: DMAR 0x0000000079447250 0000F0 (v01 INTEL SKL
00000001 INTL 00000001)
[ 0.000000] ACPI: ASF! 0x0000000079447340 0000A5 (v32 INTEL HCG
00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x27efeb000-0x27effcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000069537fff]
[ 0.000000] node 0: [mem 0x0000000069563000-0x00000000695bdfff]
[ 0.000000] node 0: [mem 0x0000000069daf000-0x000000007907dfff]
[ 0.000000] node 0: [mem 0x000000007a4ff000-0x000000007a4fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[ 0.000000] On node 0 totalpages: 2062334
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7650 pages used for memmap
[ 0.000000] DMA32 zone: 489571 pages, LIFO batch:31
[ 0.000000] Normal zone: 24512 pages used for memmap
[ 0.000000] Normal zone: 1568768 pages, LIFO batch:31
[ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[ 0.000000] Reserving Intel graphics stolen memory at 0x7c000000-0x7fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67823000-0x67823fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67833000-0x67833fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x69538000-0x69538fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x69539000-0x69562fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x695be000-0x69daefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7907e000-0x793f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x793f9000-0x79448fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79449000-0x79c00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79c01000-0x7a4fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a500000-0x7a5fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a600000-0x7bffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88027ec00000 s104024 r8192
d31144 u524288
[ 0.000000] pcpu-alloc: s104024 r8192 d31144 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 2030087
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test
root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2
splash=silent quiet showopts pcie_aspm=force
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 3706140K/8249336K available (6701K kernel code, 1127K
rwdata, 3016K rodata, 1656K init, 1648K bss, 497728K reserved, 0K cma-reserved)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2399.949 MHz processor
[ 0.000027] Calibrating delay loop (skipped), value calculated using timer
frequency.. 4799.89 BogoMIPS (lpj=9599796)
[ 0.000030] pid_max: default: 32768 minimum: 301
[ 0.000039] ACPI: Core revision 20160422
[ 0.000922] Security Framework initialized
[ 0.000928] AppArmor: AppArmor initialized
[ 0.001447] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.002952] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003608] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003616] Mountpoint-cache hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.003848] CPU: Physical Processor ID: 0
[ 0.003849] CPU: Processor Core ID: 0
[ 0.003853] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003854] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003858] mce: CPU supports 8 MCE banks
[ 0.003867] CPU0: Thermal monitoring enabled (TM1)
[ 0.003890] process: using mwait in idle threads
[ 0.003892] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.003893] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.004255] Freeing SMP alternatives memory: 24K (ffffffff81eb9000 -
ffffffff81ebf000)
[ 0.016195] ftrace: allocating 26970 entries in 106 pages
[ 0.027589] smpboot: Max logical packages: 2
[ 0.027591] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.027596] DMAR: Host address width 39
[ 0.027597] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.027604] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462
ecap 7e3ff0505e
[ 0.027606] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.027610] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462
ecap f050da
[ 0.027612] DMAR: RMRR base: 0x0000007918b000 end: 0x000000791aafff
[ 0.027613] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[ 0.027614] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.027615] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.027617] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.027618] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.027619] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.027620] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS
setting.
[ 0.027810] DMAR: DRHD: handling fault status reg 2
[ 0.027815] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 6824
[fault reason 37] Blocked a compatibility format interrupt request
[ 0.029049] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.029050] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.033157] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072848] TSC deadline timer enabled
[ 0.072853] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family:
0x6, model: 0x4e, stepping: 0x3)
[ 0.072857] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events,
full-width counters, Intel PMU driver.
[ 0.072886] ... version: 4
[ 0.072887] ... bit width: 48
[ 0.072888] ... generic registers: 4
[ 0.072888] ... value mask: 0000ffffffffffff
[ 0.072889] ... max period: 0000ffffffffffff
[ 0.072890] ... fixed-purpose events: 3
[ 0.072891] ... event mask: 000000070000000f
[ 0.097018] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.117030] x86: Booting SMP configuration:
[ 0.117031] .... node #0, CPUs: #1 #2 #3
[ 0.391196] x86: Booted up 1 node, 4 CPUs
[ 0.391200] smpboot: Total of 4 processors activated (19202.81 BogoMIPS)
[ 0.410714] node 0 initialised, 1011367 pages in 12ms
[ 0.419179] devtmpfs: initialized
[ 0.419243] x86/mm: Memory block size: 128MB
[ 0.427205] PM: Registering ACPI NVS region [mem 0x69538000-0x69538fff]
(4096 bytes)
[ 0.427207] PM: Registering ACPI NVS region [mem 0x79449000-0x79c00fff]
(8093696 bytes)
[ 0.427409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.439085] pinctrl core: initialized pinctrl subsystem
[ 0.439204] RTC time: 19:40:40, date: 05/30/16
[ 0.451932] NET: Registered protocol family 16
[ 0.463116] cpuidle: using governor ladder
[ 0.475135] cpuidle: using governor menu
[ 0.475184] Simple Boot Flag at 0x47 set to 0x80
[ 0.475214] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.475217] ACPI: bus type PCI registered
[ 0.475219] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.495271] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.495273] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.495280] PCI: Using configuration type 1 for base access
[ 0.495285] dmi type 0xB1 record - unknown flag
[ 0.519287] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.519288] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.539282] ACPI: Added _OSI(Module Device)
[ 0.539283] ACPI: Added _OSI(Processor Device)
[ 0.539284] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.539286] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.567786] ACPI: Executed 21 blocks of module-level executable AML code
[ 0.579489] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.583484] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.599042] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.706018] ACPI: Dynamic OEM Table Load:
[ 0.706025] ACPI: SSDT 0xFFFF88027EBDA800 00061E (v02 PmRef Cpu0Ist
00003000 INTL 20120913)
[ 0.707109] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.708603] ACPI: Dynamic OEM Table Load:
[ 0.708609] ACPI: SSDT 0xFFFF88027EC37000 00037F (v02 PmRef Cpu0Cst
00003001 INTL 20120913)
[ 0.710463] ACPI: Dynamic OEM Table Load:
[ 0.710468] ACPI: SSDT 0xFFFF88027EBDA000 0005AA (v02 PmRef ApIst
00003000 INTL 20120913)
[ 0.711960] ACPI: Dynamic OEM Table Load:
[ 0.711965] ACPI: SSDT 0xFFFF88027ED46E00 000119 (v02 PmRef ApCst
00003000 INTL 20120913)
[ 0.715042] ACPI: Interpreter enabled
[ 0.715076] ACPI: (supports S0 S3 S4 S5)
[ 0.715077] ACPI: Using IOAPIC for interrupt routing
[ 0.715115] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.717346] ACPI: Power Resource [PG00] (on)
[ 0.717781] ACPI: Power Resource [PG01] (on)
[ 0.718200] ACPI: Power Resource [PG02] (on)
[ 0.720297] ACPI: Power Resource [WRST] (off)
[ 0.720722] ACPI: Power Resource [WRST] (off)
[ 0.721145] ACPI: Power Resource [WRST] (off)
[ 0.721566] ACPI: Power Resource [WRST] (off)
[ 0.721994] ACPI: Power Resource [WRST] (off)
[ 0.722416] ACPI: Power Resource [WRST] (off)
[ 0.722837] ACPI: Power Resource [WRST] (off)
[ 0.723258] ACPI: Power Resource [WRST] (off)
[ 0.723679] ACPI: Power Resource [WRST] (off)
[ 0.724128] ACPI: Power Resource [WRST] (off)
[ 0.724556] ACPI: Power Resource [WRST] (off)
[ 0.724975] ACPI: Power Resource [WRST] (off)
[ 0.725397] ACPI: Power Resource [WRST] (off)
[ 0.725822] ACPI: Power Resource [WRST] (off)
[ 0.726244] ACPI: Power Resource [WRST] (off)
[ 0.726665] ACPI: Power Resource [WRST] (off)
[ 0.727085] ACPI: Power Resource [WRST] (off)
[ 0.727508] ACPI: Power Resource [WRST] (off)
[ 0.727927] ACPI: Power Resource [WRST] (off)
[ 0.728350] ACPI: Power Resource [WRST] (off)
[ 0.744692] ACPI: Power Resource [FN00] (off)
[ 0.744822] ACPI: Power Resource [FN01] (off)
[ 0.744948] ACPI: Power Resource [FN02] (off)
[ 0.745074] ACPI: Power Resource [FN03] (off)
[ 0.745199] ACPI: Power Resource [FN04] (off)
[ 0.746565] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.746572] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.746621] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid
UUID
[ 0.746621] _OSC request data: 1 1f 0
[ 0.746625] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.747356] PCI host bridge to bus 0000:00
[ 0.747359] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.747360] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.747362] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.747363] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff
window]
[ 0.747364] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff
window]
[ 0.747366] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff
window]
[ 0.747367] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff
window]
[ 0.747368] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff
window]
[ 0.747370] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff
window]
[ 0.747371] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff
window]
[ 0.747372] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff
window]
[ 0.747373] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff
window]
[ 0.747375] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff
window]
[ 0.747376] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff
window]
[ 0.747377] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff
window]
[ 0.747378] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff
window]
[ 0.747380] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.747387] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 0.747537] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 0.747546] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[ 0.747552] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit
pref]
[ 0.747557] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.747722] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.747732] pci 0000:00:04.0: reg 0x10: [mem 0xdc320000-0xdc327fff 64bit]
[ 0.747962] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.747982] pci 0000:00:14.0: reg 0x10: [mem 0xdc310000-0xdc31ffff 64bit]
[ 0.748054] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.748191] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.748232] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.748252] pci 0000:00:14.2: reg 0x10: [mem 0xdc338000-0xdc338fff 64bit]
[ 0.748527] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.748735] pci 0000:00:15.0: reg 0x10: [mem 0xdc337000-0xdc337fff 64bit]
[ 0.749712] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.749908] pci 0000:00:15.1: reg 0x10: [mem 0xdc336000-0xdc336fff 64bit]
[ 0.750821] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.750840] pci 0000:00:16.0: reg 0x10: [mem 0xdc335000-0xdc335fff 64bit]
[ 0.750909] pci 0000:00:16.0: PME# supported from D3hot
[ 0.751080] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.751097] pci 0000:00:17.0: reg 0x10: [mem 0xdc330000-0xdc331fff]
[ 0.751106] pci 0000:00:17.0: reg 0x14: [mem 0xdc334000-0xdc3340ff]
[ 0.751115] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.751124] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.751133] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.751142] pci 0000:00:17.0: reg 0x24: [mem 0xdc333000-0xdc3337ff]
[ 0.751187] pci 0000:00:17.0: PME# supported from D3hot
[ 0.751361] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.751434] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.751602] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.751651] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.751724] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.751889] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.751927] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.751996] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.752159] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.752203] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 0.752269] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.752430] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.752498] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 0.752755] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.752766] pci 0000:00:1f.2: reg 0x10: [mem 0xdc32c000-0xdc32ffff]
[ 0.752959] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380
[ 0.752981] pci 0000:00:1f.3: reg 0x10: [mem 0xdc328000-0xdc32bfff 64bit]
[ 0.753008] pci 0000:00:1f.3: reg 0x20: [mem 0xdc300000-0xdc30ffff 64bit]
[ 0.753058] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.753247] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.753290] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.753337] pci 0000:00:1f.4: reg 0x10: [mem 0xdc332000-0xdc3320ff 64bit]
[ 0.753409] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.753739] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.753744] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.753749] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff
64bit pref]
[ 0.753896] pci 0000:3a:00.0: [8086:095a] type 00 class 0x028000
[ 0.753939] pci 0000:3a:00.0: reg 0x10: [mem 0xdc200000-0xdc201fff 64bit]
[ 0.754121] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[ 0.754254] pci 0000:3a:00.0: System wakeup disabled by ACPI
[ 0.758452] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.758457] pci 0000:00:1c.4: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.758588] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.758616] pci 0000:3b:00.0: reg 0x14: [mem 0xdc100000-0xdc100fff]
[ 0.758729] pci 0000:3b:00.0: supports D1 D2
[ 0.758731] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.758828] pci 0000:3b:00.0: System wakeup disabled by ACPI
[ 0.766450] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.766455] pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.766574] pci 0000:3c:00.0: [144d:a802] type 00 class 0x010802
[ 0.766594] pci 0000:3c:00.0: reg 0x10: [mem 0xdc000000-0xdc003fff 64bit]
[ 0.766604] pci 0000:3c:00.0: reg 0x18: [io 0xe000-0xe0ff]
[ 0.766799] pci 0000:3c:00.0: System wakeup disabled by ACPI
[ 0.774466] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.774469] pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
[ 0.774472] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.776941] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777016] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.777088] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777159] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777230] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777301] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777376] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.777448] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.779945] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.781038] ACPI : EC: GPE = 0x14, I/O: command/status = 0x934, data = 0x930
[ 0.781040] ACPI : EC: EC started
[ 0.812407] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.812409] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.812412] vgaarb: loaded
[ 0.812413] vgaarb: bridge control possible 0000:00:02.0
[ 0.822633] SCSI subsystem initialized
[ 0.822668] libata version 3.00 loaded.
[ 0.822762] PCI: Using ACPI for IRQ routing
[ 0.846790] PCI: pci_cache_line_size set to 64 bytes
[ 0.846934] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.846935] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.846936] e820: reserve RAM buffer [mem 0x67823018-0x67ffffff]
[ 0.846938] e820: reserve RAM buffer [mem 0x69538000-0x6bffffff]
[ 0.846939] e820: reserve RAM buffer [mem 0x695be000-0x6bffffff]
[ 0.846940] e820: reserve RAM buffer [mem 0x7907e000-0x7bffffff]
[ 0.846942] e820: reserve RAM buffer [mem 0x7a500000-0x7bffffff]
[ 0.846943] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[ 0.847030] NetLabel: Initializing
[ 0.847031] NetLabel: domain hash size = 128
[ 0.847032] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.847043] NetLabel: unlabeled traffic allowed by default
[ 0.847135] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.847140] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.849186] clocksource: Switched to clocksource hpet
[ 0.854773] VFS: Disk quotas dquot_6.6.0
[ 0.865242] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.881280] AppArmor: AppArmor Filesystem Enabled
[ 0.881311] pnp: PnP ACPI init
[ 0.881558] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.881560] system 00:00: [io 0xffff] has been reserved
[ 0.881562] system 00:00: [io 0xffff] has been reserved
[ 0.881563] system 00:00: [io 0xffff] has been reserved
[ 0.881565] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.881566] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.881570] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.881666] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.881710] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.881713] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02
(active)
[ 0.881817] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.881839] pnp 00:04: Plug and Play ACPI device, IDs DLL0704 PNP0f13
(active)
[ 0.882113] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.882114] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.882116] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.882118] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.882119] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.882121] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.882122] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.882124] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.882126] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.882128] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.882130] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.882178] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.882180] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.882182] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.882183] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.882185] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.882187] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.882189] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.882191] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.882489] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.882491] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.883799] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.883801] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.883803] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.884590] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.890429] pnp: PnP ACPI: found 10 devices
[ 0.898990] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.899003] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus
01-39] add_size 1000
[ 0.899024] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res
add_size 1000 min_align 1000
[ 0.899026] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res
add_size 1000 min_align 1000
[ 0.899029] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.899032] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.899034] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.899038] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.899041] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff
64bit pref]
[ 0.899046] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.899050] pci 0000:00:1c.4: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.899057] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.899061] pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.899068] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.899070] pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
[ 0.899073] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.899080] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.899082] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.899083] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.899085] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.899086] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.899087] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.899088] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.899090] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.899091] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.899092] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.899094] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.899095] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.899096] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.899098] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.899099] pci_bus 0000:00: resource 18 [mem 0x80000000-0xdfffffff window]
[ 0.899100] pci_bus 0000:00: resource 19 [mem 0xfd000000-0xfe7fffff window]
[ 0.899102] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.899103] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 0.899104] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit
pref]
[ 0.899106] pci_bus 0000:3a: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.899107] pci_bus 0000:3b: resource 1 [mem 0xdc100000-0xdc1fffff]
[ 0.899109] pci_bus 0000:3c: resource 0 [io 0xe000-0xefff]
[ 0.899110] pci_bus 0000:3c: resource 1 [mem 0xdc000000-0xdc0fffff]
[ 0.965244] NET: Registered protocol family 2
[ 0.977286] TCP established hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.977389] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.977490] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.977506] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.977527] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.005246] NET: Registered protocol family 1
[ 1.005259] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 1.006361] PCI: CLS 0 bytes, default 64
[ 1.006403] Unpacking initramfs...
[ 1.943987] Freeing initrd memory: 8656K (ffff88002f71f000 -
ffff88002ff93000)
[ 1.957284] DMAR: ACPI device "device:64" under DMAR at fed91000 as 00:15.0
[ 1.957288] DMAR: ACPI device "device:65" under DMAR at fed91000 as 00:15.1
[ 1.957304] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.957313] software IO TLB [mem 0x63823000-0x67823000] (64MB) mapped at
[ffff880063823000-ffff880067822fff]
[ 1.957344] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms
ovfl timer
[ 1.957345] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 1.957346] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 1.957346] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 1.957347] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 1.957348] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 1.957416] Scanning for low memory corruption every 60 seconds
[ 1.969397] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.981268] audit: initializing netlink subsys (disabled)
[ 1.981281] audit: type=2000 audit(1464637241.940:1): initialized
[ 1.981881] workingset: timestamp_bits=35 max_order=21 bucket_order=0
[ 1.981908] zbud: loaded
[ 2.005278] Key type big_key registered
[ 2.006149] Key type asymmetric registered
[ 2.006151] Asymmetric key parser 'x509' registered
[ 2.025325] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
248)
[ 2.025392] io scheduler noop registered
[ 2.025393] io scheduler deadline registered
[ 2.041310] io scheduler cfq registered (default)
[ 2.041971] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.041975] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.041996] efifb: probing for efifb
[ 2.042009] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[ 2.042010] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[ 2.042010] efifb: scrolling: redraw
[ 2.042012] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.053091] Console: switching to colour frame buffer device 400x112
[ 2.064037] fb0: EFI VGA frame buffer device
[ 2.064044] intel_idle: MWAIT substates: 0x11142120
[ 2.064045] intel_idle: v0.4.1 model 0x4E
[ 2.064255] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.064378] GHES: HEST is not enabled!
[ 2.064444] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 2.067294] Non-volatile memory driver v1.3
[ 2.067366] Linux agpgart interface v0.103
[ 2.089302] tpm_tis 00:09: 1.2 TPM (device-id 0xFE, rev-id 2)
[ 2.185932] ahci 0000:00:17.0: version 3.0
[ 2.186112] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x0
impl SATA mode
[ 2.186114] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum
part deso sadm sds apst
[ 2.187094] scsi host0: ahci
[ 2.187359] scsi host1: ahci
[ 2.187533] scsi host2: ahci
[ 2.187745] scsi host3: ahci
[ 2.187926] scsi host4: ahci
[ 2.188135] scsi host5: ahci
[ 2.188348] scsi host6: ahci
[ 2.188540] scsi host7: ahci
[ 2.188587] ata1: DUMMY
[ 2.188588] ata2: DUMMY
[ 2.188589] ata3: DUMMY
[ 2.188589] ata4: DUMMY
[ 2.188590] ata5: DUMMY
[ 2.188591] ata6: DUMMY
[ 2.188592] ata7: DUMMY
[ 2.188592] ata8: DUMMY
[ 2.188664] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 2.189190] i8042: Warning: Keylock active
[ 2.191483] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.191513] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.191675] mousedev: PS/2 mouse device common for all mice
[ 2.191934] rtc_cmos 00:01: RTC can wake from S4
[ 2.192620] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.192710] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram,
hpet irqs
[ 2.192718] intel_pstate: Intel P-state driver initializing
[ 2.192996] intel_pstate: HWP enabled
[ 2.193000] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.193001] EFI Variables Facility v0.08 2004-May-17
[ 2.193533] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 2.198068] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.281453] NET: Registered protocol family 10
[ 2.282117] microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x82
[ 2.282125] microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x82
[ 2.282143] microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x82
[ 2.282156] microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x82
[ 2.282244] microcode: Microcode Update Driver: v2.01
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.282518] registered taskstats version 1
[ 2.282539] zswap: loaded using pool lzo/zbud
[ 2.289182] Key type encrypted registered
[ 2.289187] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.530880] Magic number: 0:398:699
[ 2.531100] rtc_cmos 00:01: setting system clock to 2016-05-30 19:40:42 UTC
(1464637242)
[ 2.531173] PM: Checking hibernation image partition /dev/nvme0n1p2
[ 2.957305] tsc: Refined TSC clocksource calibration: 2399.992 MHz
[ 2.957308] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x22982fdf183, max_idle_ns: 440795240423 ns
[ 2.999263] psmouse serio1: synaptics: queried max coordinates: x [..5666],
y [..4734]
[ 3.030195] psmouse serio1: synaptics: queried min coordinates: x [1276..],
y [1118..]
[ 3.091716] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id:
0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x0, board id: 3038, fw id: 2011643
[ 3.130500] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input2
[ 3.133494] PM: Hibernation image not present or could not be loaded.
[ 3.134712] Freeing unused kernel memory: 1656K (ffffffff81d1b000 -
ffffffff81eb9000)
[ 3.134715] Write protecting the kernel read-only data: 12288k
[ 3.135294] Freeing unused kernel memory: 1476K (ffff88000168f000 -
ffff880001800000)
[ 3.138254] Freeing unused kernel memory: 1080K (ffff880001af2000 -
ffff880001c00000)
[ 3.141995] random: systemd urandom read with 19 bits of entropy available
[ 3.160614] systemd[1]: systemd 210 running in system mode. (+PAM +LIBWRAP
+AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP
+APPARMOR)
[ 3.160824] systemd[1]: Detected architecture 'x86-64'.
[ 3.160828] systemd[1]: Running in initial RAM disk.
[ 3.160910] systemd[1]: Set hostname to <jarvis>.
[ 3.208651] systemd[1]: Expecting device
dev-disk-by\x2duuid-994363fd\x2dc12c\x2d4c6c\x2d92e9\x2d85e8ac695cf9.device...
[ 3.208712] systemd[1]: Starting Timers.
[ 3.208732] systemd[1]: Reached target Timers.
[ 3.208751] systemd[1]: Starting -.slice.
[ 3.224376] systemd[1]: Created slice -.slice.
[ 3.224418] systemd[1]: Starting udev Kernel Socket.
[ 3.224456] systemd[1]: Listening on udev Kernel Socket.
[ 3.224477] systemd[1]: Starting udev Control Socket.
[ 3.224516] systemd[1]: Listening on udev Control Socket.
[ 3.224535] systemd[1]: Starting Journal Socket.
[ 3.224587] systemd[1]: Listening on Journal Socket.
[ 3.224607] systemd[1]: Starting Sockets.
[ 3.224624] systemd[1]: Reached target Sockets.
[ 3.224642] systemd[1]: Starting System Slice.
[ 3.224825] systemd[1]: Created slice System Slice.
[ 3.224845] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.225020] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.225128] systemd[1]: Starting dracut cmdline hook...
[ 3.225710] systemd[1]: Starting Create list of required static device nodes
for the current kernel...
[ 3.226331] systemd[1]: Starting Load Kernel Modules...
[ 3.226918] systemd[1]: Starting Entropy Daemon based on the HAVEGE
algorithm...
[ 3.227557] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[ 3.228587] systemd[1]: Starting Journal Service...
[ 3.229353] systemd[1]: Starting Slices.
[ 3.229384] systemd[1]: Reached target Slices.
[ 3.229435] systemd[1]: Starting Setup Virtual Console...
[ 3.230113] systemd[1]: Starting Swap.
[ 3.230142] systemd[1]: Reached target Swap.
[ 3.230174] systemd[1]: Starting Local File Systems.
[ 3.230196] systemd[1]: Reached target Local File Systems.
[ 3.230791] systemd[1]: Started Create list of required static device nodes
for the current kernel.
[ 3.231107] systemd[1]: Started Load Kernel Modules.
[ 3.232688] systemd[1]: Starting Apply Kernel Variables...
[ 3.233488] systemd[1]: Starting Create static device nodes in /dev...
[ 3.236341] systemd[1]: Started Apply Kernel Variables.
[ 3.250794] systemd[1]: Started Create static device nodes in /dev.
[ 3.265362] systemd[1]: Started Setup Virtual Console.
[ 3.276968] systemd[1]: Started Journal Service.
[ 3.440925] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 3.443016] ACPI: Lid Switch [LID0]
[ 3.443080] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 3.443254] ACPI: Power Button [PBTN]
[ 3.443310] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 3.443354] ACPI: Sleep Button [SBTN]
[ 3.443413] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 3.443454] ACPI: Power Button [PWRF]
[ 3.494009] [drm] Initialized drm 1.1.0 20060810
[ 3.494624] ACPI: bus type USB registered
[ 3.494681] usbcore: registered new interface driver usbfs
[ 3.494709] usbcore: registered new interface driver hub
[ 3.494734] usbcore: registered new device driver usb
[ 3.496057] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.496073] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 1
[ 3.497548] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100
quirks 0x00109810
[ 3.497577] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.497876] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.497884] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.497885] usb usb1: Product: xHCI Host Controller
[ 3.497886] usb usb1: Manufacturer: Linux 4.7.0-rc1+ xhci-hcd
[ 3.497887] usb usb1: SerialNumber: 0000:00:14.0
[ 3.498136] hub 1-0:1.0: USB hub found
[ 3.498211] hub 1-0:1.0: 12 ports detected
[ 3.518208] rtsx_pci 0000:3b:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1,
pci->irq = 124
[ 3.520256] nvme nvme0: pci function 0000:3c:00.0
[ 3.532479] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.532485] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 2
[ 3.532739] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.532741] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.532743] usb usb2: Product: xHCI Host Controller
[ 3.532745] usb usb2: Manufacturer: Linux 4.7.0-rc1+ xhci-hcd
[ 3.532746] usb usb2: SerialNumber: 0000:00:14.0
[ 3.532970] hub 2-0:1.0: USB hub found
[ 3.533008] hub 2-0:1.0: 6 ports detected
[ 3.538242] usb: port power management may be unreliable
[ 3.613657] [drm] Memory usable by graphics device = 4096M
[ 3.613661] checking generic (90000000 15f9000) vs hw (90000000 10000000)
[ 3.613662] fb: switching to inteldrmfb from EFI VGA
[ 3.613692] Console: switching to colour dummy device 80x25
[ 3.613787] [drm] Replacing VGA console driver
[ 3.619481] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.619485] [drm] Driver supports precise vblank timestamp query.
[ 3.629464] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.632867] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
[ 3.644364] nvme0n1: p1 p2 p3 p4
[ 3.645446] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.647997] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 3.648743] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 3.729362] raid6: sse2x1 gen() 6580 MB/s
[ 3.797329] raid6: sse2x1 xor() 4087 MB/s
[ 3.865349] raid6: sse2x2 gen() 8293 MB/s
[ 3.913450] fbcon: inteldrmfb (fb0) is primary device
[ 3.933312] raid6: sse2x2 xor() 6051 MB/s
[ 3.965329] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 4.001342] raid6: sse2x4 gen() 9754 MB/s
[ 4.069350] raid6: sse2x4 xor() 7007 MB/s
[ 4.069351] clocksource: Switched to clocksource tsc
[ 4.098414] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2a
[ 4.098415] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.137257] raid6: avx2x1 gen() 12003 MB/s
[ 4.205258] raid6: avx2x2 gen() 15599 MB/s
[ 4.213263] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 4.273266] raid6: avx2x4 gen() 22635 MB/s
[ 4.273267] raid6: using algorithm avx2x4 gen() 22635 MB/s
[ 4.273267] raid6: using avx2x2 recovery algorithm
[ 4.273429] xor: automatically using best checksumming function:
[ 4.313260] avx : 23170.000 MB/sec
[ 4.398808] usb 1-4: New USB device found, idVendor=04f3, idProduct=20d0
[ 4.398809] usb 1-4: New USB device strings: Mfr=4, Product=14,
SerialNumber=0
[ 4.398810] usb 1-4: Product: Touchscreen
[ 4.398810] usb 1-4: Manufacturer: ELAN
[ 4.405128] usbcore: registered new interface driver usbhid
[ 4.405128] usbhid: USB HID core driver
[ 4.541340] Btrfs loaded, assert=on
[ 4.541609] BTRFS: device fsid 994363fd-c12c-4c6c-92e9-85e8ac695cf9 devid 1
transid 239305 /dev/nvme0n1p3
[ 4.565304] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 4.789852] usb 1-5: New USB device found, idVendor=0bda, idProduct=5682
[ 4.789853] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 4.789854] usb 1-5: Product: Integrated_Webcam_HD
[ 4.789855] usb 1-5: Manufacturer: CKFEH41I373010052032
[ 4.789855] usb 1-5: SerialNumber: 200901010001
[ 4.857549] [drm] RC6 on
[ 5.709440] Console: switching to colour frame buffer device 400x112
[ 5.719099] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.762345] PM: Starting manual resume from disk
[ 5.762349] PM: Hibernation image partition 259:2 present
[ 5.762350] PM: Looking for hibernation image.
[ 5.762559] PM: Image not found (code -22)
[ 5.762561] PM: Hibernation image not present or could not be loaded.
[ 5.774266] BTRFS info (device nvme0n1p3): disk space caching is enabled
[ 5.774269] BTRFS info (device nvme0n1p3): has skinny extents
[ 5.784851] BTRFS info (device nvme0n1p3): detected SSD devices, enabling
SSD mode
[ 6.028042] systemd-journald[140]: Received SIGTERM from PID 1 (systemd).
[ 6.211204] BTRFS info (device nvme0n1p3): disk space caching is enabled
[ 6.219352] random: nonblocking pool is initialized
[ 6.257883] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 6.260411] FUJITSU Extended Socket Network Device Driver - version 1.1 -
Copyright (c) 2015 FUJITSU LIMITED
[ 6.280386] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 6.288792] acpi INT33D5:00: intel-hid: created platform device
[ 6.288921] input: Intel HID events as
/devices/platform/INT33D5:00/input/input8
[ 6.300684] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 6.300997] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 6.315932] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 6.326273] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.326283] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node
ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.326290] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node
ffff88027ed78f28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.326300] acpi PNP0C0B:00: Failed to change power state to D0
[ 6.326850] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 6.332304] ACPI: Battery Slot [BAT0] (battery present)
[ 6.334145] thermal LNXTHERM:00: registered as thermal_zone4
[ 6.334148] ACPI: Thermal Zone [THM] (25 C)
[ 6.335114] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.335126] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node
ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.335133] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node
ffff88027ed78f28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.335144] acpi PNP0C0B:00: Failed to set initial power state
[ 6.335202] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.CHRG] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.335209] ACPI Error: Method parse/execution failed [\PNOT] (Node
ffff88027edee758), AE_NOT_FOUND (20160422/psparse-542)
[ 6.335214] ACPI Error: Method parse/execution failed [\_SB.AC._PSR] (Node
ffff88027ed41528), AE_NOT_FOUND (20160422/psparse-542)
[ 6.335222] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state
(20160422/ac-128)
[ 6.335560] wmi: Mapper loaded
[ 6.339542] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.339551] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node
ffff88027ed7b6e0), AE_NOT_FOUND (20160422/psparse-542)
[ 6.339780] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.339785] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node
ffff88027ed7b6e0), AE_NOT_FOUND (20160422/psparse-542)
[ 6.339883] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.339888] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node
ffff88027ed7b618), AE_NOT_FOUND (20160422/psparse-542)
[ 6.339971] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.339976] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node
ffff88027ed7b618), AE_NOT_FOUND (20160422/psparse-542)
[ 6.341961] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.342357] ACPI Warning: SystemIO range
0x000000000000F040-0x000000000000F05F conflicts with OpRegion
0x000000000000F040-0x000000000000F04F (\_SB.PCI0.SBUS.SMBI)
(20160422/utaddress-255)
[ 6.342363] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 6.374285] Bluetooth: Core ver 2.21
[ 6.374318] NET: Registered protocol family 31
[ 6.374320] Bluetooth: HCI device and connection manager initialized
[ 6.374324] Bluetooth: HCI socket layer initialized
[ 6.374326] Bluetooth: L2CAP socket layer initialized
[ 6.374332] Bluetooth: SCO socket layer initialized
[ 6.397815] Bluetooth: HCI UART driver ver 2.3
[ 6.397819] Bluetooth: HCI UART protocol H4 registered
[ 6.397820] Bluetooth: HCI UART protocol BCSP registered
[ 6.397822] Bluetooth: HCI UART protocol LL registered
[ 6.397823] Bluetooth: HCI UART protocol ATH3K registered
[ 6.397824] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 6.397887] Bluetooth: HCI UART protocol Intel registered
[ 6.397905] Bluetooth: HCI UART protocol BCM registered
[ 6.397906] Bluetooth: HCI UART protocol QCA registered
[ 6.405480] AVX2 version of gcm_enc/dec engaged.
[ 6.405484] AES CTR mode by8 optimization enabled
[ 6.412910] Intel(R) Wireless WiFi driver for Linux
[ 6.412913] Copyright(c) 2003- 2015 Intel Corporation
[ 6.412993] iwlwifi 0000:3a:00.0: enabling device (0000 -> 0002)
[ 6.414543] iwlwifi 0000:3a:00.0: Unsupported splx structure
[ 6.421709] iwlwifi 0000:3a:00.0: loaded firmware version 21.302800.0
op_mode iwlmvm
[ 6.433757] acpi PNP0C0B:00: Cannot transition from (unknown) to D3hot
[ 6.441541] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.441549] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node
ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.441557] ACPI Error: Method parse/execution failed [\_TZ.FN01._ON] (Node
ffff88027ed78de8), AE_NOT_FOUND (20160422/psparse-542)
[ 6.441565] acpi PNP0C0B:01: Failed to change power state to D0
[ 6.449519] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.449528] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node
ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.449536] ACPI Error: Method parse/execution failed [\_TZ.FN01._ON] (Node
ffff88027ed78de8), AE_NOT_FOUND (20160422/psparse-542)
[ 6.449546] acpi PNP0C0B:01: Failed to set initial power state
[ 6.456203] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 6.457351] int3403 thermal: probe of INT3403:03 failed with error -22
[ 6.462986] iwlwifi 0000:3a:00.0: Detected Intel(R) Dual Band Wireless AC
7265, REV=0x210
[ 6.463446] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 6.463844] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 6.465054] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 6.465252] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 6.489421] acpi PNP0C0B:01: Cannot transition from (unknown) to D3hot
[ 6.489714] Adding 2096124k swap on /dev/nvme0n1p2. Priority:-1 extents:1
across:2096124k SSFS
[ 6.497577] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.497588] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node
ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.497598] ACPI Error: Method parse/execution failed [\_TZ.FN02._ON] (Node
ffff88027ed78ca8), AE_NOT_FOUND (20160422/psparse-542)
[ 6.497609] acpi PNP0C0B:02: Failed to change power state to D0
[ 6.505518] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.505542] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node
ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.505551] ACPI Error: Method parse/execution failed [\_TZ.FN02._ON] (Node
ffff88027ed78ca8), AE_NOT_FOUND (20160422/psparse-542)
[ 6.505561] acpi PNP0C0B:02: Failed to set initial power state
[ 6.525329] acpi PNP0C0B:02: Cannot transition from (unknown) to D3hot
[ 6.529824] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246:
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.529828] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 6.529830] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 6.529832] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.529833] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.529835] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 6.529837] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 6.529839] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 6.533547] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.533558] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node
ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.533567] ACPI Error: Method parse/execution failed [\_TZ.FN03._ON] (Node
ffff88027ed78b68), AE_NOT_FOUND (20160422/psparse-542)
[ 6.533577] acpi PNP0C0B:03: Failed to change power state to D0
[ 6.536935] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 6.543632] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data
may be corrupt. Please run fsck.
[ 6.546255] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 6.547377] input: HDA Intel PCH Headphone Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 6.547540] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 6.547617] input: HDA Intel PCH HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 6.548016] input: HDA Intel PCH HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 6.548652] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.548661] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node
ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.548668] ACPI Error: Method parse/execution failed [\_TZ.FN03._ON] (Node
ffff88027ed78b68), AE_NOT_FOUND (20160422/psparse-542)
[ 6.548683] acpi PNP0C0B:03: Failed to set initial power state
[ 6.565354] acpi PNP0C0B:03: Cannot transition from (unknown) to D3hot
[ 6.573311] device-mapper: uevent: version 1.0.3
[ 6.573543] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.573553] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node
ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.573562] ACPI Error: Method parse/execution failed [\_TZ.FN04._ON] (Node
ffff88027ed78a28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.573573] acpi PNP0C0B:04: Failed to change power state to D0
[ 6.581518] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup
failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.581549] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node
ffff88027ed7b938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.581556] ACPI Error: Method parse/execution failed [\_TZ.FN04._ON] (Node
ffff88027ed78a28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.581566] acpi PNP0C0B:04: Failed to set initial power state
[ 6.589375] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised:
dm-de...@redhat.com
[ 6.597368] acpi PNP0C0B:04: Cannot transition from (unknown) to D3hot
[ 6.599862] ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at
index 0 - found Integer, expected Reference (20160422/nspredef-297)
[ 6.599871] ACPI: Invalid package element [0]: got number, expecting [R]
[ 6.599873] _ART package 0 is invalid, ignored
[ 6.600251] input: PC Speaker as /devices/platform/pcspkr/input/input14
[ 6.688756] input: ELAN Touchscreen as
/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0001/input/input15
[ 6.688958] hid-multitouch 0003:04F3:20D0.0001: input,hiddev0,hidraw0: USB
HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 6.696909] input: DLL0704:01 06CB:76AE Touchpad as
/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL0704:01/0018:06CB:76AE.0002/input/input17
[ 6.697041] hid-multitouch 0018:06CB:76AE.0002: input,hidraw1: I2C HID v1.00
Mouse [DLL0704:01 06CB:76AE] on i2c-DLL0704:01
[ 6.947538] systemd-journald[378]: Received request to flush runtime journal
from PID 1
[ 6.949158] audit: type=1305 audit(1464637246.910:2): audit_pid=792 old=0
auid=4294967295 ses=4294967295 res=1
[ 6.984618] systemd-journald[378]: File
/var/log/journal/69c54807c3cb473b82a49c7b7e022c37/system.journal corrupted or
uncleanly shut down, renaming and replacing.
[ 7.406991] Linux video capture interface: v2.00
[ 7.490406] usbcore: registered new interface driver btusb
[ 7.505817] Bluetooth: hci0: read Intel version: 370810011003110e23
[ 7.505821] Bluetooth: hci0: Intel device is already patched. patch num: 23
[ 7.510120] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5682)
[ 7.519169] input: Integrated_Webcam_HD as
/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19
[ 7.519255] usbcore: registered new interface driver uvcvideo
[ 7.519257] USB Video Class driver (1.1.1)
[ 7.863528] systemd-journald[378]: Received request to flush runtime journal
from PID 1
[ 12.935479] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.935481] Bluetooth: BNEP filters: protocol multicast
[ 12.935485] Bluetooth: BNEP socket layer initialized
[ 12.980072] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.997454] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 13.029906] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.029955] SGI XFS with ACLs, security attributes, realtime, no debug
enabled
[ 13.154614] XFS (dm-0): Mounting V5 Filesystem
[ 13.173927] XFS (dm-0): Ending clean mount
[ 13.531564] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 13.531862] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 13.596889] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 13.597186] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 13.630776] NET: Registered protocol family 17
