After "regulator: qcom_smd: add list_voltage callback" patch adding
pm8941 lnldo regulators would bug on list_voltages as it is a fixed
regulator without any linear range.
This patch fixes that issue by adding dedicated ops for pm8941 lnldo
without list_voltages callback.
Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
---
drivers/regulator/qcom_smd-regulator.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/qcom_smd-regulator.c
b/drivers/regulator/qcom_smd-regulator.c
index b11b627..6c7fe477 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -148,6 +148,17 @@ static const struct regulator_ops rpm_smps_ldo_ops = {
.set_load = rpm_reg_set_load,
};
+static const struct regulator_ops rpm_smps_ldo_ops_fixed = {
+ .enable = rpm_reg_enable,
+ .disable = rpm_reg_disable,
+ .is_enabled = rpm_reg_is_enabled,
+
+ .get_voltage = rpm_reg_get_voltage,
+ .set_voltage = rpm_reg_set_voltage,
+
+ .set_load = rpm_reg_set_load,
+};
+
static const struct regulator_ops rpm_switch_ops = {
.enable = rpm_reg_enable,
.disable = rpm_reg_disable,
@@ -248,7 +259,7 @@ static const struct regulator_desc pm8941_nldo = {
static const struct regulator_desc pm8941_lnldo = {
.fixed_uV = 1740000,
.n_voltages = 1,
- .ops = &rpm_smps_ldo_ops,
+ .ops = &rpm_smps_ldo_ops_fixed,
};
static const struct regulator_desc pm8941_switch = {
--
2.8.2
