Thanks Robert! -----Original Message----- From: Robert Nelson [mailto:robertcnel...@gmail.com] Sent: Wednesday, June 8, 2016 1:15 AM To: Li, Yong B <yong.b...@intel.com> Cc: Tony Lindgren <t...@atomide.com>; Benoit Cousson <bcous...@baylibre.com>; Rob Herring <robh...@kernel.org>; Pawel Moll <pawel.m...@arm.com>; Mark Rutland <mark.rutl...@arm.com>; Ian Campbell <ijc+devicet...@hellion.org.uk>; Kumar Gala <ga...@codeaurora.org>; Russell King <li...@arm.linux.org.uk>; linux-o...@vger.kernel.org; devicetree <devicet...@vger.kernel.org>; linux-arm-ker...@lists.infradead.org; linux kernel <linux-kernel@vger.kernel.org>; sdliy...@gmail.com; Pantelis Antoniou <pantelis.anton...@konsulko.com> Subject: Re: [PATCH] ARM: dts: am335x-boneblack: add i2c1 DT entry
On Tue, Jun 7, 2016 at 1:14 AM, Li, Yong B <yong.b...@intel.com> wrote: > Thanks Tony. > > I checked the DTS/overlays using linux-yocto-4.1 kernel(Ostro OS). It seems > to me that the kernel/u-boot do not include the latest overlay support patch. > And I also tested the latest Debian 8.4 using BBB boards, the I2C1 does not > work too. This patch is the simplest solution for I2C1/I2C2 in > linux-yocto-4.1. ps, your patch is also broken, you didn't even mux the pins, so i2c1 doesn't work for you anyways. ;) pinctrl-0 = <&i2c2_pins>; -> pinctrl-0 = <&i2c1_pins>; Option 1: With the latest BBB image's, we utilize "cape_universal", thus you can enable I2C1 via: root@beaglebone:~# config-pin -l P9.17 default gpio gpio_pu gpio_pd spi i2c pwm root@beaglebone:~# config-pin -l P9.18 default gpio gpio_pu gpio_pd spi i2c pwm root@beaglebone:~# config-pin P9.17 i2c root@beaglebone:~# config-pin P9.18 i2c Option 2, for the BB-I2C1 overlay: add cape_enable=bone_capemgr.enable_partno=BB-I2C1 Option 3, wait for Pantelis's solution... ;) http://comments.gmane.org/gmane.linux.kernel/2234662 Regards, -- Robert Nelson https://rcn-ee.com/
