On Wed, 2016-06-01 at 14:55 +0200, Martin Kepplinger wrote: > It's *really* fun to use as an input tablet though! So let's support this > for everybody.
Nice job, but a few issues are left. I'll comment in the code. > +static void pegasus_close(struct input_dev *dev) > +{ > + struct pegasus *pegasus = input_get_drvdata(dev); > + int autopm_error; > + > + autopm_error = usb_autopm_get_interface(pegasus->intf); There is no need for this. > + usb_kill_urb(pegasus->irq); > + cancel_work_sync(&pegasus->init); > + > + if (!autopm_error) > + usb_autopm_put_interface(pegasus->intf); > +} > + > +static int pegasus_probe(struct usb_interface *intf, > + const struct usb_device_id *id) > +{ > + struct usb_device *dev = interface_to_usbdev(intf); > + struct usb_endpoint_descriptor *endpoint; > + struct pegasus *pegasus; > + struct input_dev *input_dev; > + int error; > + int pipe, maxp; > + > + /* We control interface 0 */ > + if (intf->cur_altsetting->desc.bInterfaceNumber == 1) > + return -ENODEV; > + > + /* Sanity check that the device has an endpoint */ > + if (intf->altsetting[0].desc.bNumEndpoints < 1) { > + dev_err(&intf->dev, "Invalid number of endpoints\n"); > + return -EINVAL; > + } > + endpoint = &intf->cur_altsetting->endpoint[0].desc; > + > + pegasus = kzalloc(sizeof(*pegasus), GFP_KERNEL); > + input_dev = input_allocate_device(); > + if (!pegasus || !input_dev) { > + error = -ENOMEM; > + goto err_free_mem; > + } > + > + pegasus->usbdev = dev; > + pegasus->dev = input_dev; > + pegasus->intf = intf; > + > + pegasus->data = usb_alloc_coherent(dev, endpoint->wMaxPacketSize, > + GFP_KERNEL, &pegasus->data_dma); > + if (!pegasus->data) { > + error = -ENOMEM; > + goto err_free_mem; > + } > + > + pegasus->irq = usb_alloc_urb(0, GFP_KERNEL); > + if (!pegasus->irq) { > + error = -ENOMEM; > + goto err_free_dma; > + } > + > + pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); > + maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); > + pegasus->data_len = maxp; > + > + usb_fill_int_urb(pegasus->irq, dev, pipe, pegasus->data, maxp, > + pegasus_irq, pegasus, endpoint->bInterval); > + > + pegasus->irq->transfer_dma = pegasus->data_dma; > + pegasus->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; > + > + if (dev->manufacturer) > + strlcpy(pegasus->name, dev->manufacturer, > + sizeof(pegasus->name)); > + > + if (dev->product) { > + if (dev->manufacturer) > + strlcat(pegasus->name, " ", sizeof(pegasus->name)); > + strlcat(pegasus->name, dev->product, sizeof(pegasus->name)); > + } > + > + if (!strlen(pegasus->name)) > + snprintf(pegasus->name, sizeof(pegasus->name), > + "USB Pegasus Device %04x:%04x", > + le16_to_cpu(dev->descriptor.idVendor), > + le16_to_cpu(dev->descriptor.idProduct)); > + > + usb_make_path(dev, pegasus->phys, sizeof(pegasus->phys)); > + strlcat(pegasus->phys, "/input0", sizeof(pegasus->phys)); > + > + INIT_WORK(&pegasus->init, pegasus_init); > + > + usb_set_intfdata(intf, pegasus); > + > + input_dev->name = pegasus->name; > + input_dev->phys = pegasus->phys; > + usb_to_input_id(dev, &input_dev->id); > + input_dev->dev.parent = &intf->dev; > + > + input_set_drvdata(input_dev, pegasus); > + > + input_dev->open = pegasus_open; > + input_dev->close = pegasus_close; > + > + __set_bit(EV_ABS, input_dev->evbit); > + __set_bit(EV_KEY, input_dev->evbit); > + > + __set_bit(ABS_X, input_dev->absbit); > + __set_bit(ABS_Y, input_dev->absbit); > + > + __set_bit(BTN_TOUCH, input_dev->keybit); > + __set_bit(BTN_RIGHT, input_dev->keybit); > + __set_bit(BTN_TOOL_PEN, input_dev->keybit); > + > + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); > + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); > + > + input_set_abs_params(input_dev, ABS_X, -1500, 1500, 8, 0); > + input_set_abs_params(input_dev, ABS_Y, 1600, 3000, 8, 0); > + > + pegasus_set_mode(pegasus, PEN_MODE_XY, NOTETAKER_LED_MOUSE); If you need to do this here. It is also needed in reset_resume() > + error = input_register_device(pegasus->dev); > + if (error) > + goto err_free_urb; > + > + return 0; > + > +err_free_urb: > + usb_free_urb(pegasus->irq); > +err_free_dma: > + usb_free_coherent(dev, pegasus->data_len, > + pegasus->data, pegasus->data_dma); > +err_free_mem: > + input_free_device(input_dev); > + kfree(pegasus); > + usb_set_intfdata(intf, NULL); > + > + return error; > +} > + > +static void pegasus_disconnect(struct usb_interface *intf) > +{ > + struct pegasus *pegasus = usb_get_intfdata(intf); > + > + input_unregister_device(pegasus->dev); > + > + usb_free_urb(pegasus->irq); > + usb_free_coherent(interface_to_usbdev(intf), > + pegasus->data_len, pegasus->data, > + pegasus->data_dma); > + kfree(pegasus); > + usb_set_intfdata(intf, NULL); > +} > + > +static int pegasus_suspend(struct usb_interface *intf, pm_message_t message) > +{ > + struct pegasus *pegasus = usb_get_intfdata(intf); > + > + mutex_lock(&pegasus->dev->mutex); > + usb_kill_urb(pegasus->irq); You must also stop the scheduled work. > + mutex_unlock(&pegasus->dev->mutex); > + > + return 0; > +} > + > +static int pegasus_resume(struct usb_interface *intf) > +{ > + struct pegasus *pegasus = usb_get_intfdata(intf); > + int retval = 0; > + > + mutex_lock(&pegasus->dev->mutex); > + if (pegasus->dev->users && usb_submit_urb(pegasus->irq, GFP_NOIO) < 0) > + retval = -EIO; > + mutex_unlock(&pegasus->dev->mutex); > + > + return retval; > +} > + > +static int pegasus_reset_resume(struct usb_interface *intf) > +{ Either the mode must be set on fresh hardware, or this is unnecessary. > + return pegasus_resume(intf); > +} HTH Oliver