The Parrot Board is an evaluation board with an Allwinner R16 (assumed to be close to an Allwinner A33), 4GB of NAND, 512MB of RAM, USB host and OTG, a WiFi/Bluetooth combo chip, a micro SD Card reader, 2 controllable buttons, an LVDS port with separated backlight and capacitive touch panel ports, an audio/microphone jack, a camera CSI port, 2 sets of 22 GPIOs and an accelerometer.
This patch requires patches named "[v3] regulator: axp20x: Add support for the (external) drivebus regulator" and "[PATCH 3/4] ARM: dts: axp22x.dtsi: Add reg_drivebus node" from Hans de Goede or the micro USB port would not be powered. Quentin Schulz (1): ARM: sun8i: Add Parrot Board DTS arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-r16-parrot.dts | 333 +++++++++++++++++++++++++++++++++ 2 files changed, 334 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-r16-parrot.dts -- 2.5.0
