[PATCH RFT] regulator: qcom_smd: Remove list_voltage callback for rpm_smps_ldo_ops_fixed

[Axel Lin]

Use regulator_list_voltage_linear_range in rpm_smps_ldo_ops_fixed is
wrong because it is used for fixed regulator without any linear range.
The rpm_smps_ldo_ops_fixed is used for pm8941_lnldo which has fixed_uV
set and n_voltages = 1. In this case, regulator_list_voltage() can return
rdev->desc->fixed_uV without .list_voltage implementation.

Fixes: 3bfbb4d1a480 ("regulator: qcom_smd: add list_voltage callback")
Signed-off-by: Axel Lin <axel....@ingics.com>
---
 drivers/regulator/qcom_smd-regulator.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/regulator/qcom_smd-regulator.c 
b/drivers/regulator/qcom_smd-regulator.c
index 526bf23..6c7fe477 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -152,7 +152,6 @@ static const struct regulator_ops rpm_smps_ldo_ops_fixed = {
        .enable = rpm_reg_enable,
        .disable = rpm_reg_disable,
        .is_enabled = rpm_reg_is_enabled,
-       .list_voltage = regulator_list_voltage_linear_range,
 
        .get_voltage = rpm_reg_get_voltage,
        .set_voltage = rpm_reg_set_voltage,
-- 
2.5.0