Signed-off-by: Andrey Smirnov <[email protected]>
---
drivers/rtc/rtc-ds1307.c | 106 ++++++++++++++++++++++++++---------------------
1 file changed, 59 insertions(+), 47 deletions(-)
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 2169e5b..45b2adb 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -1344,66 +1344,23 @@ static int ds1307_chip_configure(const struct ds1307
*ds1307)
DS1337_REG_CONTROL,
regs[0]);
- /* oscillator fault? clear flag, and warn */
- if (regs[1] & DS1337_BIT_OSF) {
- i2c_smbus_write_byte_data(client,
- DS1337_REG_STATUS,
- regs[1] & ~DS1337_BIT_OSF);
- dev_warn(&ds1307->client->dev, "SET TIME!\n");
- }
break;
}
case rx_8025:
- tmp = i2c_smbus_read_i2c_block_data(client,
- RX8025_REG_CTRL1,
- 2, regs);
- if (tmp != 2) {
+ tmp = i2c_smbus_read_byte_data(client, RX8025_REG_CTRL1);
+ if (tmp < 0) {
dev_dbg(&client->dev, "read error %d\n", tmp);
return -EIO;
}
- /* oscillator off? turn it on, so clock can tick. */
- if (!(regs[1] & RX8025_BIT_XST)) {
- regs[1] |= RX8025_BIT_XST;
- i2c_smbus_write_byte_data(client,
- RX8025_REG_CTRL2,
- regs[1]);
- dev_warn(&client->dev,
- "oscillator stop detected - SET TIME!\n");
- }
-
- if (regs[1] & RX8025_BIT_PON) {
- regs[1] &= ~RX8025_BIT_PON;
- i2c_smbus_write_byte_data(client,
- RX8025_REG_CTRL2,
- regs[1]);
- dev_warn(&client->dev, "power-on detected\n");
- }
-
- if (regs[1] & RX8025_BIT_VDET) {
- regs[1] &= ~RX8025_BIT_VDET;
- i2c_smbus_write_byte_data(client,
- RX8025_REG_CTRL2,
- regs[1]);
- dev_warn(&client->dev, "voltage drop detected\n");
- }
-
/* make sure we are running in 24hour mode */
- if (!(regs[0] & RX8025_BIT_2412)) {
+ if (!(tmp & RX8025_BIT_2412)) {
u8 hour;
/* switch to 24 hour mode */
i2c_smbus_write_byte_data(client,
RX8025_REG_CTRL1,
- regs[0] | RX8025_BIT_2412);
-
- tmp = i2c_smbus_read_i2c_block_data(client,
- RX8025_REG_CTRL1,
- 2, regs);
- if (tmp != 2) {
- dev_dbg(&client->dev, "read error %d\n", tmp);
- return -EIO;
- }
+ tmp | RX8025_BIT_2412);
/* correct hour */
hour = bcd2bin(regs[DS1307_REG_HOUR]);
@@ -1486,6 +1443,27 @@ static int ds1307_chip_sanity_check(const struct ds1307
*ds1307)
continue;
}
break;
+
+ case ds_1337:
+ case ds_1339:
+ case ds_3231:
+ case ds_1341:
+ tmp = i2c_smbus_read_byte_data(client,
+ DS1337_REG_STATUS);
+ if (tmp < 0) {
+ dev_dbg(&client->dev, "read error %d\n", tmp);
+ return -EIO;
+ }
+
+ /* oscillator fault? clear flag, and warn */
+ if (tmp & DS1337_BIT_OSF) {
+ i2c_smbus_write_byte_data(client,
+ DS1337_REG_STATUS,
+ regs[1] &
~DS1337_BIT_OSF);
+ ds1307_report_oscillator_fault(ds1307);
+ }
+ return 0;
+
case ds_1340:
/* clock halted? turn it on, so clock can tick. */
if (tmp & DS1340_BIT_nEOSC) {
@@ -1530,6 +1508,40 @@ static int ds1307_chip_sanity_check(const struct ds1307
*ds1307)
}
break;
+
+ case rx_8025:
+ tmp = i2c_smbus_read_byte_data(client,
+ RX8025_REG_CTRL2);
+ if (tmp < 0) {
+ dev_dbg(&client->dev, "read error %d\n", tmp);
+ return -EIO;
+ }
+
+ /* oscillator off? turn it on, so clock can tick. */
+ if (!(tmp & RX8025_BIT_XST)) {
+ tmp |= RX8025_BIT_XST;
+ i2c_smbus_write_byte_data(client,
+ RX8025_REG_CTRL2,
+ tmp);
+ ds1307_report_clock_halt(ds1307);
+ }
+
+ if (tmp & RX8025_BIT_PON) {
+ tmp &= ~RX8025_BIT_PON;
+ i2c_smbus_write_byte_data(client,
+ RX8025_REG_CTRL2,
+ tmp);
+ dev_warn(&client->dev, "power-on detected\n");
+ }
+
+ if (tmp & RX8025_BIT_VDET) {
+ tmp &= ~RX8025_BIT_VDET;
+ i2c_smbus_write_byte_data(client,
+ RX8025_REG_CTRL2,
+ tmp);
+ dev_warn(&client->dev, "voltage drop
detected\n");
+ }
+ break;
default:
break;
}
--
2.5.5
