On Fri 17 Jun 03:22 PDT 2016, Neil Armstrong wrote:
[..]
> diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
[..]
> +
> +static const struct qcom_rpm_data mdm9615_template = {
> + .version = 3,
> + .resource_table = mdm9615_rpm_resource_table,
> + .n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table),
> +};
Please see:
https://patchwork.kernel.org/patch/9177159/
You should set the new .sel_size to 4 here, please either rebase ontop
of Linus patch or send an update after both are merged.
> +
> static const struct of_device_id qcom_rpm_of_match[] = {
> { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
> { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
> { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
> { .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
> + { .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template },
> { }
> };
> MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
> diff --git a/include/dt-bindings/mfd/qcom-rpm.h
> b/include/dt-bindings/mfd/qcom-rpm.h
> index 13a9d4b..db85912 100644
> --- a/include/dt-bindings/mfd/qcom-rpm.h
> +++ b/include/dt-bindings/mfd/qcom-rpm.h
> @@ -148,6 +148,29 @@
> #define QCOM_RPM_SMB208_S2a 138
> #define QCOM_RPM_SMB208_S2b 139
>
> +#define QCOM_RPM_PM8018_SMPS1 200
These numbers are a logical identifier and as such you shouldn't skip
140-199.
> +#define QCOM_RPM_PM8018_SMPS2 201
> +#define QCOM_RPM_PM8018_SMPS3 202
> +#define QCOM_RPM_PM8018_SMPS4 203
> +#define QCOM_RPM_PM8018_SMPS5 204
> +#define QCOM_RPM_PM8018_LDO1 205
> +#define QCOM_RPM_PM8018_LDO2 206
> +#define QCOM_RPM_PM8018_LDO3 207
> +#define QCOM_RPM_PM8018_LDO4 208
> +#define QCOM_RPM_PM8018_LDO5 209
> +#define QCOM_RPM_PM8018_LDO6 210
> +#define QCOM_RPM_PM8018_LDO7 211
> +#define QCOM_RPM_PM8018_LDO8 212
> +#define QCOM_RPM_PM8018_LDO9 213
> +#define QCOM_RPM_PM8018_LDO10 214
> +#define QCOM_RPM_PM8018_LDO11 215
> +#define QCOM_RPM_PM8018_LDO12 216
> +#define QCOM_RPM_PM8018_LDO13 217
> +#define QCOM_RPM_PM8018_LDO14 218
> +#define QCOM_RPM_PM8018_LVS1 219
> +#define QCOM_RPM_NCP 220
We already have PM8921_NCP and PM8058_NCP, so better make this
QCOM_RPM_PM8018_NCP for consistency.
> +#define QCOM_RPM_VOLTAGE_CORNER 221
> +
Other then these details
Acked-by: Bjorn Andersson <bjorn.anders...@linaro.org>
Regards,
Bjorn
