On Tue, 6 Feb 2007 19:26:28 +0000 Ben Dooks <[EMAIL PROTECTED]> wrote:

> This patch is an update patch, ready for merging
> for the Silicon Motion SM501 multi-function device
> core.
> 
> This driver handles the core function of the chip,
> including the clock, power control and allocation
> of resources for drivers. It also exports a series
> of platform devices for the function drivers to
> attach to.
> 
> This patch supports both platform and PCI bus
> attached devices.
> 
> Signed-off-by: Ben Dooks <[EMAIL PROTECTED]>

Can we get Vincent's signoff here?

> +#ifdef CONFIG_DEBUG

This doesn't appear to be defined anywhere, and nor should it be. 
Something subsystem-specific should be used here?

> +static const unsigned int misc_div[] = {
> +     [0]             = 1,
> +     [1]             = 2,
> +     [2]             = 4,
> +     [3]             = 8,
> +     [4]             = 16,
> +     [5]             = 32,
> +     [6]             = 64,
> +     [7]             = 128,
> +     [8]             = 3,
> +     [9]             = 6,
> +     [10]            = 12,
> +     [11]            = 24,
> +     [12]            = 48,
> +     [13]            = 96,
> +     [14]            = 192,
> +     [15]            = 384,
> +};
> +
> +static const unsigned int px_div[] = {
> +     [0]             = 1,
> +     [1]             = 2,
> +     [2]             = 4,
> +     [3]             = 8,
> +     [4]             = 16,
> +     [5]             = 32,
> +     [6]             = 64,
> +     [7]             = 128,
> +     [8]             = 3,
> +     [9]             = 6,
> +     [10]            = 12,
> +     [11]            = 24,
> +     [12]            = 48,
> +     [13]            = 96,
> +     [14]            = 192,
> +     [15]            = 384,
> +     [16]            = 5,
> +     [17]            = 10,
> +     [18]            = 20,
> +     [19]            = 40,
> +     [20]            = 80,
> +     [21]            = 160,
> +     [22]            = 320,
> +     [23]            = 604,
> +};
> +#endif
> +
> +#define decode_div(val, lshft, selbit, mask, dtab) \
> +     ((((val) & (selbit)) ? pll2 : 288 * MHZ) / dtab[(((val) >> (lshft)) & 
> (mask))])

A C function would be nicer here, if poss.

> +#define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x)

eww.

> +             (void)readl(sm->regs);

Is there any benefit in all those casts?  Generally we prefer to avoid
them.

> +EXPORT_SYMBOL_GPL(sm501_misc_control);

The driver exports a lot of symbols.  Does it really need to?

> +     down(&sm->clock_lock);

Please convert to a mutex, if possible.

> +/* sm501_null_release
> + *
> + * A release function for the platform devices we create to keep the
> + * driver core happy, and stop any crashed when the devices are removed
> +*/
> +
> +static void sm501_null_release(struct device *dev)
> +{
> +}

Greg might have an opinion on that ;)

> +static void sm501_create_mem(struct sm501_devdata *sm,
> +                          struct resource *res,
> +                          unsigned long *offs,
> +                          unsigned long size)
> +{
> +     *offs -= size;          /* adjust memory size */
> +
> +     res->flags = IORESOURCE_MEM;
> +     res->parent = sm->mem_res;
> +     res->start = sm->mem_res->start + *offs;
> +     res->end = res->start + size - 1;
> +}

Please use resource_size_t throughout, test with CONFIG_RESOURCES_64BIT on
and off.

> +static inline void sm501_init_reg(struct sm501_devdata *sm,
> +                               unsigned long reg,
> +                               struct sm501_reg_init *r)
> +{
> +     unsigned long tmp;
> +
> +     tmp = readl(sm->regs + reg);
> +     tmp |= r->set;
> +     tmp &= ~r->mask;
> +     writel(tmp, sm->regs + reg);
> +}

This might be too large to inline.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to