On Fri, Jul 15, 2016 at 11:59:13AM +0200, Quentin Schulz wrote: > The Allwinner SoCs all have an ADC that can also act as a touchscreen > controller and a thermal sensor. For now, only the ADC and the thermal > sensor drivers are probed by the MFD, the touchscreen controller support > will be added later. > > Signed-off-by: Quentin Schulz <quentin.sch...@free-electrons.com> > --- > > v2: > - add license headers, > - reorder alphabetically includes, > - add SUNXI_GPADC_ prefixes for defines, > > drivers/mfd/Kconfig | 14 +++ > drivers/mfd/Makefile | 2 + > drivers/mfd/sunxi-gpadc-mfd.c | 197 > ++++++++++++++++++++++++++++++++++++ > include/linux/mfd/sunxi-gpadc-mfd.h | 23 +++++ > 4 files changed, 236 insertions(+) > create mode 100644 drivers/mfd/sunxi-gpadc-mfd.c > create mode 100644 include/linux/mfd/sunxi-gpadc-mfd.h > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 1bcf601..67b55d0 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -82,6 +82,20 @@ config MFD_ATMEL_FLEXCOM > by the probe function of this MFD driver according to a device tree > property. > > +config MFD_SUNXI_ADC > + tristate "ADC MFD core driver for sunxi platforms" > + select MFD_CORE > + select REGMAP_MMIO
It should also depends on the architectures supported (and probably
COMPILE_TEST)
> + help
> + Select this to get support for Allwinner SoCs (A10, A13 and A31) ADC.
> + This driver will only map the hardware interrupt and registers, you
> + have to select individual drivers based on this MFD to be able to use
> + the ADC or the thermal sensor. This will try to probe the ADC driver
> + sunxi-gpadc-iio and the hwmon driver iio_hwmon.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called sunxi-gpadc-mfd.
> +
> config MFD_ATMEL_HLCDC
> tristate "Atmel HLCDC (High-end LCD Controller)"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 42a66e1..dcf43cd 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -201,6 +201,8 @@ obj-$(CONFIG_MFD_DLN2) += dln2.o
> obj-$(CONFIG_MFD_RT5033) += rt5033.o
> obj-$(CONFIG_MFD_SKY81452) += sky81452.o
>
> +obj-$(CONFIG_MFD_SUNXI_ADC) += sunxi-gpadc-mfd.o
> +
> intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o
> obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> diff --git a/drivers/mfd/sunxi-gpadc-mfd.c b/drivers/mfd/sunxi-gpadc-mfd.c
> new file mode 100644
> index 0000000..f0005a6
> --- /dev/null
> +++ b/drivers/mfd/sunxi-gpadc-mfd.c
> @@ -0,0 +1,197 @@
> +/* ADC MFD core driver for sunxi platforms
> + *
> + * Copyright (c) 2016 Quentin Schulz <quentin.schulz@free-electrons>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> by
> + * the Free Software Foundation.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/mfd/sunxi-gpadc-mfd.h>
> +
> +#define SUNXI_IRQ_FIFO_DATA 0
> +#define SUNXI_IRQ_TEMP_DATA 1
> +
> +static struct resource adc_resources[] = {
> + {
> + .name = "FIFO_DATA_PENDING",
> + .start = SUNXI_IRQ_FIFO_DATA,
> + .end = SUNXI_IRQ_FIFO_DATA,
> + .flags = IORESOURCE_IRQ,
> + }, {
> + .name = "TEMP_DATA_PENDING",
> + .start = SUNXI_IRQ_TEMP_DATA,
> + .end = SUNXI_IRQ_TEMP_DATA,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static const struct regmap_irq sunxi_gpadc_mfd_regmap_irq[] = {
> + REGMAP_IRQ_REG(SUNXI_IRQ_FIFO_DATA, 0, BIT(16)),
> + REGMAP_IRQ_REG(SUNXI_IRQ_TEMP_DATA, 0, BIT(18)),
> +};
> +
> +static const struct regmap_irq_chip sunxi_gpadc_mfd_regmap_irq_chip = {
> + .name = "sunxi_gpadc_mfd_irq_chip",
> + .status_base = SUNXI_GPADC_TP_INT_FIFOS,
> + .ack_base = SUNXI_GPADC_TP_INT_FIFOS,
> + .mask_base = SUNXI_GPADC_TP_INT_FIFOC,
> + .init_ack_masked = true,
> + .mask_invert = true,
> + .irqs = sunxi_gpadc_mfd_regmap_irq,
> + .num_irqs = ARRAY_SIZE(sunxi_gpadc_mfd_regmap_irq),
> + .num_regs = 1,
> +};
> +
> +static struct mfd_cell sun4i_gpadc_mfd_cells[] = {
> + {
> + .name = "sun4i-a10-gpadc-iio",
> + .resources = adc_resources,
> + .num_resources = ARRAY_SIZE(adc_resources),
> + }, {
> + .name = "iio_hwmon",
> + }
> +};
> +
> +static struct mfd_cell sun5i_gpadc_mfd_cells[] = {
> + {
> + .name = "sun5i-a13-gpadc-iio",
> + .resources = adc_resources,
> + .num_resources = ARRAY_SIZE(adc_resources),
> + }, {
> + .name = "iio_hwmon",
> + },
> +};
> +
> +static struct mfd_cell sun6i_gpadc_mfd_cells[] = {
> + {
> + .name = "sun6i-a31-gpadc-iio",
> + .resources = adc_resources,
> + .num_resources = ARRAY_SIZE(adc_resources),
> + }, {
> + .name = "iio_hwmon",
> + },
> +};
> +
> +static const struct regmap_config sunxi_gpadc_mfd_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .fast_io = true,
> +};
> +
> +static int sunxi_gpadc_mfd_probe(struct platform_device *pdev)
> +{
> + struct sunxi_gpadc_mfd_dev *sunxi_gpadc_mfd_dev = NULL;
> + struct resource *mem = NULL;
> + unsigned int irq;
> + int ret;
> +
> + sunxi_gpadc_mfd_dev = devm_kzalloc(&pdev->dev,
> + sizeof(*sunxi_gpadc_mfd_dev),
> + GFP_KERNEL);
> + if (!sunxi_gpadc_mfd_dev)
> + return -ENOMEM;
> +
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + sunxi_gpadc_mfd_dev->regs = devm_ioremap_resource(&pdev->dev, mem);
> + if (IS_ERR(sunxi_gpadc_mfd_dev->regs))
> + return PTR_ERR(sunxi_gpadc_mfd_dev->regs);
> +
> + sunxi_gpadc_mfd_dev->dev = &pdev->dev;
> + dev_set_drvdata(sunxi_gpadc_mfd_dev->dev, sunxi_gpadc_mfd_dev);
> +
> + sunxi_gpadc_mfd_dev->regmap =
> + devm_regmap_init_mmio(sunxi_gpadc_mfd_dev->dev,
> + sunxi_gpadc_mfd_dev->regs,
> + &sunxi_gpadc_mfd_regmap_config);
This is usually on a single line (even if it exceeds 80 chars). Or
maybe you can use a shorter variable name (like dev, or mfd).
> + if (IS_ERR(sunxi_gpadc_mfd_dev->regmap)) {
> + ret = PTR_ERR(sunxi_gpadc_mfd_dev->regmap);
> + dev_err(&pdev->dev, "failed to init regmap: %d\n", ret);
> + return ret;
> + }
> +
> + irq = platform_get_irq(pdev, 0);
> + ret = regmap_add_irq_chip(sunxi_gpadc_mfd_dev->regmap, irq,
> + IRQF_ONESHOT, 0,
> + &sunxi_gpadc_mfd_regmap_irq_chip,
> + &sunxi_gpadc_mfd_dev->regmap_irqc);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to add irq chip: %d\n", ret);
> + return ret;
> + }
You should probably make sure that you clear all the interrupts before
enabling them.
> + if (of_device_is_compatible(pdev->dev.of_node,
> + "allwinner,sun4i-a10-ts"))
> + ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> + sun4i_gpadc_mfd_cells,
> + ARRAY_SIZE(sun4i_gpadc_mfd_cells), NULL,
> + 0, NULL);
> + else if (of_device_is_compatible(pdev->dev.of_node,
> + "allwinner,sun5i-a13-ts"))
> + ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> + sun5i_gpadc_mfd_cells,
> + ARRAY_SIZE(sun5i_gpadc_mfd_cells), NULL,
> + 0, NULL);
> + else if (of_device_is_compatible(pdev->dev.of_node,
> + "allwinner,sun6i-a31-ts"))
> + ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> + sun6i_gpadc_mfd_cells,
> + ARRAY_SIZE(sun6i_gpadc_mfd_cells), NULL,
> + 0, NULL);
This huge if / else can be removed by putting those structures in the
data pointer of of_device_id.
> +
> + if (ret) {
> + dev_err(&pdev->dev, "failed to add MFD devices: %d\n", ret);
> + regmap_del_irq_chip(irq, sunxi_gpadc_mfd_dev->regmap_irqc);
> + return ret;
> + }
> +
> + dev_info(&pdev->dev, "successfully loaded\n");
> +
> + return 0;
> +}
> +
> +static int sunxi_gpadc_mfd_remove(struct platform_device *pdev)
> +{
> + struct sunxi_gpadc_mfd_dev *sunxi_gpadc_mfd_dev;
> + unsigned int irq;
> +
> + irq = platform_get_irq(pdev, 0);
> + mfd_remove_devices(&pdev->dev);
> + sunxi_gpadc_mfd_dev = dev_get_drvdata(&pdev->dev);
> + regmap_del_irq_chip(irq, sunxi_gpadc_mfd_dev->regmap_irqc);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id sunxi_gpadc_mfd_of_match[] = {
> + { .compatible = "allwinner,sun4i-a10-ts" },
> + { .compatible = "allwinner,sun5i-a13-ts" },
> + { .compatible = "allwinner,sun6i-a31-ts" },
> + { /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(of, sunxi_gpadc_mfd_of_match);
> +
> +static struct platform_driver sunxi_gpadc_mfd_driver = {
> + .driver = {
> + .name = "sunxi-adc-mfd",
> + .of_match_table = of_match_ptr(sunxi_gpadc_mfd_of_match),
> + },
> + .probe = sunxi_gpadc_mfd_probe,
> + .remove = sunxi_gpadc_mfd_remove,
> +};
> +
> +module_platform_driver(sunxi_gpadc_mfd_driver);
> +
> +MODULE_DESCRIPTION("ADC MFD core driver for sunxi platforms");
> +MODULE_AUTHOR("Quentin Schulz <quentin.sch...@free-electrons.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/sunxi-gpadc-mfd.h
> b/include/linux/mfd/sunxi-gpadc-mfd.h
> new file mode 100644
> index 0000000..7155845
> --- /dev/null
> +++ b/include/linux/mfd/sunxi-gpadc-mfd.h
> @@ -0,0 +1,23 @@
> +/* Header of ADC MFD core driver for sunxi platforms
> + *
> + * Copyright (c) 2016 Quentin Schulz <quentin.schulz@free-electrons>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> by
> + * the Free Software Foundation.
> + */
> +
> +#ifndef __SUNXI_GPADC_MFD__H__
> +#define __SUNXI_GPADC_MFD__H__
> +
> +#define SUNXI_GPADC_TP_INT_FIFOC 0x10
> +#define SUNXI_GPADC_TP_INT_FIFOS 0x14
Why do you declare only these two registers there?
> +
> +struct sunxi_gpadc_mfd_dev {
> + struct device *dev;
> + struct regmap *regmap;
> + struct regmap_irq_chip_data *regmap_irqc;
> + void __iomem *regs;
> +};
> +
> +#endif
> --
> 2.5.0
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
signature.asc
Description: PGP signature
