Hi,
 
 On mer., juil. 27 2016, Gregory CLEMENT <gregory.clem...@free-electrons.com> 
wrote:

> Hi Grzegorz,
>  
>  On jeu., juil. 21 2016, Grzegorz Jaszczyk <j...@semihalf.com> wrote:
>
>> Signed-off-by: Grzegorz Jaszczyk <j...@semihalf.com>
> It looks good:
>
> Acked-by: Gregory CLEMENT <gregory.clem...@free-electrons.com>

And here again the title prefix should be change to:
"ARM: dts: mvebu: a385-db-ap:" also do not forget fo add a commit log.

Thanks,

Gregory

>
>> ---
>>  arch/arm/boot/dts/armada-385-db-ap.dts | 26 +++++++++++++++++++++++---
>>  1 file changed, 23 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts 
>> b/arch/arm/boot/dts/armada-385-db-ap.dts
>> index a18f516..6648a3f 100644
>> --- a/arch/arm/boot/dts/armada-385-db-ap.dts
>> +++ b/arch/arm/boot/dts/armada-385-db-ap.dts
>> @@ -182,15 +182,35 @@
>>  
>>                      nfc: flash@d0000 {
>>                              status = "okay";
>> -                            #address-cells = <1>;
>> -                            #size-cells = <1>;
>> -
>>                              num-cs = <1>;
>>                              nand-ecc-strength = <4>;
>>                              nand-ecc-step-size = <512>;
>>                              marvell,nand-keep-config;
>>                              marvell,nand-enable-arbiter;
>>                              nand-on-flash-bbt;
>> +
>> +                            partitions {
>> +                                    compatible = "fixed-partitions";
>> +                                    #address-cells = <1>;
>> +                                    #size-cells = <1>;
>> +
>> +                                    partition@0 {
>> +                                            label = "U-Boot";
>> +                                            reg = <0x00000000 0x00800000>;
>> +                                            read-only;
>> +                                    };
>> +
>> +                                    partition@800000 {
>> +                                            label = "uImage";
>> +                                            reg = <0x00800000 0x00400000>;
>> +                                            read-only;
>> +                                    };
>> +
>> +                                    partition@c00000 {
>> +                                            label = "Root";
>> +                                            reg = <0x00c00000 0x3f400000>;
>> +                                    };
>> +                            };
>>                      };
>>  
>>                      usb3@f0000 {
>> -- 
>> 1.8.3.1
>>
>
> -- 
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Reply via email to