This adds the thermal controller and auxadc nodes
to the Mediatek MT2701 dtsi file.

Signed-off-by: Dawei Chien <dawei.ch...@mediatek.com>
---
This patch depned on:
https://patchwork.kernel.org/patch/9249589/
---
 arch/arm/boot/dts/mt2701.dtsi |   44 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index e9150a4..cee4724 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -87,6 +87,36 @@
                clock-output-names = "rtc32k";
        };
 
+       thermal-zones {
+               cpu_thermal: cpu_thermal {
+                       polling-delay-passive = <1000>; /* milliseconds */
+                       polling-delay = <1000>; /* milliseconds */
+
+                       thermal-sensors = <&thermal 0>;
+                       sustainable-power = <1000>;
+
+                       trips {
+                               threshold: trip-point@0 {
+                                       temperature = <68000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               target: trip-point@1 {
+                                       temperature = <85000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+
+                               cpu_crit: cpu_crit@0 {
+                                       temperature = <115000>;
+                                       hysteresis = <2000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+       };
+
        timer {
                compatible = "arm,armv7-timer";
                interrupt-parent = <&gic>;
@@ -222,4 +252,18 @@
                clock-names = "baud", "bus";
                status = "disabled";
        };
+
+       thermal: thermal@1100b000 {
+               #thermal-sensor-cells = <0>;
+               compatible = "mediatek,mt2701-thermal";
+               reg = <0 0x1100b000 0 0x1000>;
+               interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
+               clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+               clock-names = "therm", "auxadc";
+               resets = <&pericfg 0x10>;
+               reset-names = "therm";
+               mediatek,auxadc = <&auxadc>;
+               mediatek,apmixedsys = <&apmixedsys>;
+       };
+
 };
-- 
1.7.9.5

Reply via email to