On 08/26/2016 12:05 PM, Randy Li wrote: > > > On 08/26/2016 05:34 PM, Hans Verkuil wrote: >> Hi Randi, >> >> On 08/26/2016 04:13 AM, Randy Li wrote: >>> Hello, >>> We always use some kind of hack work to make our Video Process >>> Unit(Multi-format Video Encoder/Decoder) work in kernel. From a >>> customize driver(vpu service) to the customize V4L2 driver. The V4L2 >>> subsystem is really not suitable for the stateless Video process or it >>> could make driver too fat. >>> After talking to some kindness Intel guys and moving our userspace >>> library to VA-API driver, I find the DRM may the good choice for us. >>> But I don't know whether it is welcome to to submit a video driver in >>> DRM subsystem? >>> Also our VPU(Video process unit) is not just like the Intel's, we >>> don't have VCS, we based on registers to set the encoder/decoder. I >>> think we may need a lots of IOCTL then. Also we do have a IOMMU in VPU >>> but also not a isolated memory for VPU, I don't know I should use TT >>> memory or GEM memory. >>> I am actually not a member of the department in charge of VPU, and I >>> am just beginning to learning DRM(thank the help from Intel again), I am >>> not so good at memory part as well(I am more familiar with CMA not the >>> IOMMU way), I may need know guide about the implementations when I am >>> going to submit driver, I hope I could get help from someone. >>> >> >> It makes no sense to do this in the DRM subsystem IMHO. There are already >> quite a few HW codecs implemented in the V4L2 subsystem and more are in the >> pipeline. Putting codec support in different subsystems will just make >> userspace software much harder to write. >> >> One of the codecs that was posted to linux-media was actually from Rockchip: >> >> https://lkml.org/lkml/2016/2/29/861 >> >> There is also a libVA driver (I think) that sits on top of it: >> >> https://github.com/rockchip-linux/rockchip-va-driver/tree/v4l2-libvpu > It is old version, I am the author of this > https://github.com/rockchip-linux/rockchip-va-driver >> >> For the Allwinner a patch series was posted yesterday: >> >> https://lkml.org/lkml/2016/8/25/246 >> >> They created a pretty generic libVA userspace that looks very promising at >> first glance. >> >> What these have in common is that they depend on the Request API and Frame >> API, >> neither of which has been merged. The problem is that the Request API >> requires >> more work since not only controls have to be part of a request, but also >> formats, >> selection rectangles, and even dynamic routing changes. While that is not >> relevant >> for codecs, it is relevant for Android CameraHAL in general and complex >> devices >> like Google's Project Ara. > Actually just as the Intel did, our hardware decoder/encoder need full > settings for them, most of them are relevant to the codec. You may > notice that there is four extra control need to be set before. If the > libvpu(a helper library we offered to parse each slice to generate > decoder settings) is remove(in process now, only three decoder settings > can't got from VA-API directly), it would be more clearly. > We really a lots decoder settings information to make the decoder work. >> >> This is being worked on, but it is simply not yet ready. The core V4L2 >> developers >> involved in this plan to discuss this on the Monday before the ELCE in >> Berlin, >> to see if we can fast track this work somehow so this support can be merged. >> > I am glad to hear that. I hope that I could have an opportunity to show > our problems. >> If there are missing features in V4L2 (other that the two APIs discussed >> above) >> that prevent you from creating a good driver, then please discuss that with >> us. >> We are always open to suggestions and improvements and want to work with you >> on >> that. > I have a few experience with the s5p-mfc, and I do wrote a V4L2 encoder > plugin for Gstreamer. I don't think the V4L2 is good place for us > stateless video processor, unless it would break the present implementation. > > The stateful and stateless are operated quite differently. The > stateless must parse the header and set those settings for every frames. > The request data may quite different from vendor to vendor, even chip to > chip. It is impossible to make a common way to send those settings to > driver.For the samsung MFC, you don't need to do any parse work at all. > Anyway, I would like to follow what Intel does now, we are both > stateless video processor.
I don't see the problem. As I understand it what the hardware needs is the video data and settings (i.e. 'state'). It will process the video data (encode or decode) and return the result (probably with additional settings/state). V4L2 + Request API does exactly that. What does DRM offer you that makes life easier for you compared to V4L2? I am not aware of Intel upstreaming any of their codec solutions, if you have pointers to patches from them attempting to do that, then please let me know. If your goal is to get your code into the upstream kernel, then I am not sure Intel is the best place to look: I have yet to see patches from their media (camera/isp/codec) team. They do not seem to care about kernel upstreaming. I am trying to avoid that support for these devices gets fragmented over various subsystems and with various userspace solutions. I don't think that is in anyone's interest. Regards, Hans