The sdhci controller on xilinx zynq devices will not function unless
the CD bit is provided. http://www.xilinx.com/support/answers/61064.html
In cases where it is impossible to provide the CD bit in hardware,
setting the controller to test mode and then setting inserted to true
will get the controller to function without the CD bit.

When the device has the property fails-without-test-cd the driver
changes the controller to test mode and sets test inserted to true to
make the controller function.

Signed-off-by: Zach Brown <[email protected]>
---
 drivers/mmc/host/sdhci-of-arasan.c | 34 +++++++++++++++++++++++++++++++++-
 drivers/mmc/host/sdhci.h           |  2 ++
 2 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c 
b/drivers/mmc/host/sdhci-of-arasan.c
index e0f193f..c3e5145 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -26,6 +26,7 @@
 #include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include "sdhci-pltfm.h"
+#include <linux/of.h>

 #define SDHCI_ARASAN_CLK_CTRL_OFFSET   0x2c
 #define SDHCI_ARASAN_VENDOR_REGISTER   0x78
@@ -92,6 +93,12 @@ struct sdhci_arasan_data {

        struct regmap   *soc_ctl_base;
        const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
+
+       unsigned int arasan_quirks; /* Arasan deviations from spec */
+
+/* Controller does not have CD wired and will not function normally without */
+#define SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD (1<<0)
+
 };

 static const struct sdhci_arasan_soc_ctl_map rk3399_soc_ctl_map = {
@@ -203,12 +210,32 @@ static void sdhci_arasan_hs400_enhanced_strobe(struct 
mmc_host *mmc,
        writel(vendor, host->ioaddr + SDHCI_ARASAN_VENDOR_REGISTER);
 }

+void sdhci_arasan_reset(struct sdhci_host *host, u8 mask)
+{
+       u8 ctrl;
+       struct sdhci_pltfm_host *pltfm_host;
+       struct sdhci_arasan_data *sdhci_arasan;
+
+       sdhci_reset(host, mask);
+
+       pltfm_host = sdhci_priv(host);
+       sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
+
+       if (sdhci_arasan->arasan_quirks &
+           SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD) {
+               ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+               ctrl |= SDHCI_CTRL_CDTEST_INS |
+                       SDHCI_CTRL_CDTEST_EN;
+               sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+       }
+}
+
 static struct sdhci_ops sdhci_arasan_ops = {
        .set_clock = sdhci_arasan_set_clock,
        .get_max_clock = sdhci_pltfm_clk_get_max_clock,
        .get_timeout_clock = sdhci_arasan_get_timeout_clock,
        .set_bus_width = sdhci_set_bus_width,
-       .reset = sdhci_reset,
+       .reset = sdhci_arasan_reset,
        .set_uhs_signaling = sdhci_set_uhs_signaling,
 };

@@ -516,6 +543,11 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
        }

        sdhci_get_of_property(pdev);
+
+       if (of_get_property(pdev->dev.of_node, "fails-without-test-cd", NULL))
+               sdhci_arasan->arasan_quirks |=
+                               SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD;
+
        pltfm_host->clk = clk_xin;

        sdhci_arasan_update_baseclkfreq(host);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 0411c9f..8d92d6e9 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -84,6 +84,8 @@
 #define   SDHCI_CTRL_ADMA32    0x10
 #define   SDHCI_CTRL_ADMA64    0x18
 #define   SDHCI_CTRL_8BITBUS   0x20
+#define  SDHCI_CTRL_CDTEST_INS   0x40
+#define  SDHCI_CTRL_CDTEST_EN     0x80

 #define SDHCI_POWER_CONTROL    0x29
 #define  SDHCI_POWER_ON                0x01
--
2.7.4

Reply via email to