H3 has single PWM channel. The second PWM channel is not supported, so the pinctrl function should be removed.
Cc: Linus Walleij <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Chen-Yu Tsai <[email protected]> Cc: Icenowy Zheng <[email protected]> Cc: Jens Kuske <[email protected]> Cc: Krzysztof Adamski <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Milo Kim <[email protected]> --- drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c index 26a2ad3..518a92d 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c @@ -60,7 +60,6 @@ static const struct sunxi_desc_pin sun8i_h3_pins[] = { SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION(0x2, "sim"), /* PWREN */ - SUNXI_FUNCTION(0x3, "pwm1"), SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)), /* PA_EINT6 */ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 7), SUNXI_FUNCTION(0x0, "gpio_in"), -- 2.9.3
