* Tony Lindgren <t...@atomide.com> [160909 14:33]:
> * Andreas Kemnade <andr...@kemnade.info> [160909 14:22]:
> > We have two independant things:
> > 1. phy-twl4030-usb (and perhaps others) do not enable
> > the phy enough to allow charging on pm_runtime_get().
> > That is fixed by my phy-related patches.
>
> OK
>
> > 2. phy_power_off/on() in called in an unbalanced way if
> > it is called behind musb_platform_enable()/disable()
> > as it happens in omap2430.c. Two ways to fix it:
> > a) prevent phy_power_off()/on() to be called in
> > an unbalanced way in omap240.c
> > b) prevent musb_platform_enable()
> > musb_platform_disable() to be called in an
> > unbalanced way by fixing musb_core.c
> >
> > Fixing 1. is enough on gta04 to fix charging and hide 2. enough to
> > have gadget working for the most common usecases. (not using
> > twl4030-charger would not work yet)
> > But in the longer term 2. has to be fixed too.
>
> Sounds like option 2b here is the real fix.
And doing full option 2b would be intrusive because of musb_stop
also calling musb_platform_disable. Here's a suggested fix for
v4.8-rc cycle.
Seems to work for me for omap3 torpedo using phy-twl4030-usb,
omap4 pandaboard es using phy-twl6030-usb and am335x beaglebone
black using dsps glue. Also PM runtime works on omap3.
This patch causes a slight merge conlict with Andrea's patches,
as listed in #1 above, but we should probably merge this first
as a fix. That is assuming it does not cause side effects to
Andrea's phy-twl4030-usb charger test case.
Can you guys please test? If things work I'll resend the
patch with proper tested-bys and acks.
Regards,
Tony
8< --------------------------
From: Tony Lindgren <t...@atomide.com>
Date: Fri, 9 Sep 2016 15:04:53 -0700
Subject: [PATCH] usb: musb: Fix unbalanced platform_disable
Commit a83e17d0f73b ("usb: musb: Improve PM runtime and phy handling
for 2430 glue layer") moved PHY enable/disable calls to happen from
omap2430_musb_enable/disable(). That broke enumeration for several
devices as PM runtime in the PHY will never enable it.
The root cause of the problem is unpaired calls from musb_core.c to
musb_platform_enable/disable in musb_core.c as reported by
Andreas Kemnade <andr...@kemnade.info>.
As musb_platform_enable/disable are being called from various functions,
let's not attempt to make them paiered immediately. This would require
fixing also musb_stop as it currently calls musb_platform_disable.
Instead, let's first fix the regression in a minimal way by removing
the initial call to musb_platform_disable.
AFAIK the initial musb_platform_disable call has always been just an
attempted workaround for the 2430 glue layer announcing itself too
early before the gadgets are configured. And that issue finally
got fixed with commit a118df07f5b1 ("usb: musb: Don't set d+ high
before enable for 2430 glue layer").
We now also need to fix the twl4030-phy accordingly making it's
PM runtime call only needed in twl4030_phy_power_on and have it
autosuspend. The cable state will keep the phy active when connected.
Cc: Kishon Vijay Abraham I <kis...@ti.com>
Reported-by: Andreas Kemnade <andr...@kemnade.info>
Reported-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Fixes: a83e17d0f73b ("usb: musb: Improve PM runtime and phy handling
for 2430 glue layer")
Signed-off-by: Tony Lindgren <t...@atomide.com>
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -447,8 +447,6 @@ static int twl4030_phy_power_off(struct phy *phy)
struct twl4030_usb *twl = phy_get_drvdata(phy);
dev_dbg(twl->dev, "%s\n", __func__);
- pm_runtime_mark_last_busy(twl->dev);
- pm_runtime_put_autosuspend(twl->dev);
return 0;
}
@@ -465,6 +463,8 @@ static int twl4030_phy_power_on(struct phy *phy)
twl4030_i2c_access(twl, 0);
twl->linkstat = MUSB_UNKNOWN;
schedule_delayed_work(&twl->id_workaround_work, HZ);
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
return 0;
}
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2142,7 +2142,6 @@ musb_init_controller(struct device *dev, int nIrq, void
__iomem *ctrl)
}
/* be sure interrupts are disabled before connecting ISR */
- musb_platform_disable(musb);
musb_generic_disable(musb);
/* Init IRQ workqueue before request_irq */
