Hi! > I have > > 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset > Integrated Graphics Controller (rev 03) > > In previous kernels, resume worked ok. With 4.8-rc1, I quite often (1 > in 10 resumes?) get in state where primary monitor (DVI) is dead (in > powersave) and all windows move to secondary monitor (VGA). Running > "xrandr" fixes that. > > I'll update to newer rc and see if it happens again, but if you have > any ideas, now would be good time.
Ok. With -rc6, X are completely broken. I got notification "could not
restore CRTC config for screen 63" or something like that, and window
manager just does not start.
X log is attached as delme, kernel log as delme2. Nothing too
suspicious :-(.
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[ 227.978] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 227.978] X Protocol Version 11, Revision 0 [ 227.978] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian [ 227.978] Current Operating System: Linux amd 4.8.0-rc6 #59 SMP Tue Sep 13 22:55:13 CEST 2016 x86_64 [ 227.978] Kernel command line: BOOT_IMAGE=(hd0,2)/l/linux-64/arch/x86/boot/bzImage root=PARTUUID=bdb19d30-04 resume=PARTUUID=bdb19d30-01 [ 227.978] Build Date: 11 February 2015 01:14:26AM [ 227.978] xorg-server 2:1.16.4-1 (http://www.debian.org/support) [ 227.978] Current version of pixman: 0.32.6 [ 227.979] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 227.979] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 227.979] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 13 23:01:42 2016 [ 227.979] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 227.979] (==) No Layout section. Using the first Screen section. [ 227.979] (==) No screen section available. Using defaults. [ 227.979] (**) |-->Screen "Default Screen Section" (0) [ 227.979] (**) | |-->Monitor "<default monitor>" [ 227.979] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 227.979] (==) Automatically adding devices [ 227.979] (==) Automatically enabling devices [ 227.979] (==) Automatically adding GPU devices [ 227.979] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 227.979] Entry deleted from font path. [ 227.980] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 227.980] (==) ModulePath set to "/usr/lib/xorg/modules" [ 227.980] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 227.980] (II) Loader magic: 0x5683b700 [ 227.980] (II) Module ABI versions: [ 227.980] X.Org ANSI C Emulation: 0.4 [ 227.980] X.Org Video Driver: 18.0 [ 227.980] X.Org XInput driver : 21.0 [ 227.980] X.Org Server Extension : 8.0 [ 227.980] (II) xfree86: Adding drm device (/dev/dri/card0) [ 227.995] (--) PCI:*(0:0:2:0) 8086:2e32:8086:d614 rev 3, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x0000f140/8, BIOS @ 0x????????/131072 [ 227.995] (--) PCI: (0:0:2:1) 8086:2e33:8086:d614 rev 3, Mem @ 0xd0400000/1048576 [ 227.995] (II) LoadModule: "glx" [ 227.997] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 227.999] (II) Module glx: vendor="X.Org Foundation" [ 227.999] compiled for 1.16.4, module version = 1.0.0 [ 227.999] ABI class: X.Org Server Extension, version 8.0 [ 227.999] (==) AIGLX enabled [ 227.999] (==) Matched intel as autoconfigured driver 0 [ 227.999] (==) Matched intel as autoconfigured driver 1 [ 227.999] (==) Matched modesetting as autoconfigured driver 2 [ 227.999] (==) Matched fbdev as autoconfigured driver 3 [ 227.999] (==) Matched vesa as autoconfigured driver 4 [ 227.999] (==) Assigned the driver to the xf86ConfigLayout [ 227.999] (II) LoadModule: "intel" [ 227.999] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 228.000] (II) Module intel: vendor="X.Org Foundation" [ 228.000] compiled for 1.15.99.904, module version = 2.21.15 [ 228.000] Module class: X.Org Video Driver [ 228.000] ABI class: X.Org Video Driver, version 18.0 [ 228.000] (II) LoadModule: "modesetting" [ 228.000] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 228.001] (II) Module modesetting: vendor="X.Org Foundation" [ 228.001] compiled for 1.16.4, module version = 0.9.0 [ 228.001] Module class: X.Org Video Driver [ 228.001] ABI class: X.Org Video Driver, version 18.0 [ 228.001] (II) LoadModule: "fbdev" [ 228.001] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 228.001] (II) Module fbdev: vendor="X.Org Foundation" [ 228.001] compiled for 1.15.99.904, module version = 0.4.4 [ 228.001] Module class: X.Org Video Driver [ 228.002] ABI class: X.Org Video Driver, version 18.0 [ 228.002] (II) LoadModule: "vesa" [ 228.002] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 228.002] (II) Module vesa: vendor="X.Org Foundation" [ 228.002] compiled for 1.15.99.904, module version = 2.3.3 [ 228.002] Module class: X.Org Video Driver [ 228.002] ABI class: X.Org Video Driver, version 18.0 [ 228.003] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 228.004] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 228.004] (II) FBDEV: driver for framebuffer: fbdev [ 228.004] (II) VESA: driver for VESA chipsets: vesa [ 228.004] (++) using VT number 7 [ 228.041] (WW) Falling back to old probe method for modesetting [ 228.057] (WW) Falling back to old probe method for fbdev [ 228.057] (II) Loading sub module "fbdevhw" [ 228.057] (II) LoadModule: "fbdevhw" [ 228.058] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 228.058] (II) Module fbdevhw: vendor="X.Org Foundation" [ 228.058] compiled for 1.16.4, module version = 0.0.2 [ 228.058] ABI class: X.Org Video Driver, version 18.0 [ 228.058] (WW) Falling back to old probe method for vesa [ 228.074] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 228.074] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 228.074] (==) intel(0): RGB weight 888 [ 228.074] (==) intel(0): Default visual is TrueColor [ 228.074] (--) intel(0): Integrated Graphics Chipset: Intel(R) G41 [ 228.074] (**) intel(0): Relaxed fencing enabled [ 228.074] (**) intel(0): Wait on SwapBuffers? enabled [ 228.074] (**) intel(0): Triple buffering? enabled [ 228.074] (**) intel(0): Framebuffer tiled [ 228.074] (**) intel(0): Pixmaps tiled [ 228.075] (**) intel(0): 3D buffers tiled [ 228.075] (**) intel(0): SwapBuffers wait enabled [ 228.075] (==) intel(0): video overlay key set to 0x101fe [ 228.252] (II) intel(0): Output VGA1 has no monitor section [ 228.572] (II) intel(0): Output HDMI1 has no monitor section [ 228.572] (II) intel(0): Output DP1 has no monitor section [ 228.736] (II) intel(0): EDID for output VGA1 [ 228.736] (II) intel(0): Manufacturer: DEL Model: a013 Serial#: 926494805 [ 228.736] (II) intel(0): Year: 2005 Week: 46 [ 228.736] (II) intel(0): EDID Version: 1.3 [ 228.736] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 228.736] (II) intel(0): Sync: Separate [ 228.736] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 23 [ 228.736] (II) intel(0): Gamma: 2.20 [ 228.736] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 228.736] (II) intel(0): Default color space is primary color space [ 228.736] (II) intel(0): First detailed timing is preferred mode [ 228.736] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 228.736] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 [ 228.736] (II) intel(0): Supported established timings: [ 228.736] (II) intel(0): 720x400@70Hz [ 228.736] (II) intel(0): 640x480@60Hz [ 228.736] (II) intel(0): 640x480@75Hz [ 228.736] (II) intel(0): 800x600@60Hz [ 228.736] (II) intel(0): 800x600@75Hz [ 228.736] (II) intel(0): 1024x768@60Hz [ 228.736] (II) intel(0): 1024x768@75Hz [ 228.736] (II) intel(0): Manufacturer's mask: 0 [ 228.736] (II) intel(0): Supported detailed timing: [ 228.736] (II) intel(0): clock: 65.0 MHz Image Size: 304 x 228 mm [ 228.736] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 [ 228.736] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 [ 228.737] (II) intel(0): Serial No: JC1415B7790U [ 228.737] (II) intel(0): Monitor name: DELL E156FP [ 228.737] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 85 MHz [ 228.737] (II) intel(0): EDID (in hex): [ 228.737] (II) intel(0): 00ffffffffffff0010ac13a055303937 [ 228.737] (II) intel(0): 2e0f0103681e1778eeee91a3544c9926 [ 228.737] (II) intel(0): 0f5054a54a0001010101010101010101 [ 228.737] (II) intel(0): 01010101010164190040410026301888 [ 228.737] (II) intel(0): 360030e410000018000000ff004a4331 [ 228.737] (II) intel(0): 3431354237373930550a000000fc0044 [ 228.737] (II) intel(0): 454c4c204531353646500a20000000fd [ 228.737] (II) intel(0): 00384b1e3d08000a202020202020006b [ 228.737] (II) intel(0): Printing probed modes for output VGA1 [ 228.737] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP) [ 228.737] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 228.737] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 228.737] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 228.737] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 228.737] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 228.737] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 229.056] (II) intel(0): EDID for output HDMI1 [ 229.056] (II) intel(0): Manufacturer: FUS Model: 80a Serial#: 5875 [ 229.056] (II) intel(0): Year: 2011 Week: 21 [ 229.056] (II) intel(0): EDID Version: 1.3 [ 229.056] (II) intel(0): Digital Display Input [ 229.056] (II) intel(0): Max Image Size [cm]: horiz.: 48 vert.: 27 [ 229.056] (II) intel(0): Gamma: 2.20 [ 229.056] (II) intel(0): DPMS capabilities: Off [ 229.056] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 229.056] (II) intel(0): First detailed timing is preferred mode [ 229.056] (II) intel(0): redX: 0.637 redY: 0.330 greenX: 0.316 greenY: 0.620 [ 229.056] (II) intel(0): blueX: 0.153 blueY: 0.067 whiteX: 0.313 whiteY: 0.329 [ 229.056] (II) intel(0): Supported established timings: [ 229.056] (II) intel(0): 720x400@70Hz [ 229.056] (II) intel(0): 640x480@60Hz [ 229.056] (II) intel(0): 640x480@75Hz [ 229.056] (II) intel(0): 800x600@60Hz [ 229.056] (II) intel(0): 800x600@75Hz [ 229.056] (II) intel(0): 1024x768@60Hz [ 229.056] (II) intel(0): 1024x768@75Hz [ 229.056] (II) intel(0): 1280x1024@75Hz [ 229.056] (II) intel(0): Manufacturer's mask: 0 [ 229.056] (II) intel(0): Supported standard timings: [ 229.056] (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 229.056] (II) intel(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 229.056] (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 229.056] (II) intel(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 229.056] (II) intel(0): Supported detailed timing: [ 229.056] (II) intel(0): clock: 148.5 MHz Image Size: 478 x 268 mm [ 229.057] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 229.057] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 229.057] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 165 MHz [ 229.057] (II) intel(0): Monitor name: L22T-3 LED [ 229.057] (II) intel(0): Serial No: YV5F005875 [ 229.057] (II) intel(0): EDID (in hex): [ 229.057] (II) intel(0): 00ffffffffffff001ab30a08f3160000 [ 229.057] (II) intel(0): 1515010380301b782a2355a354519e27 [ 229.057] (II) intel(0): 115054a54b008180a9409500b3000101 [ 229.057] (II) intel(0): 010101010101023a801871382d40582c [ 229.057] (II) intel(0): 4500de0c1100001e000000fd00384c1e [ 229.057] (II) intel(0): 5210000a202020202020000000fc004c [ 229.057] (II) intel(0): 3232542d33204c45440a2020000000ff [ 229.057] (II) intel(0): 00595635463030353837350a2020003d [ 229.057] (II) intel(0): Printing probed modes for output HDMI1 [ 229.057] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 229.057] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 229.057] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 229.057] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 229.057] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 229.057] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 229.057] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 229.057] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 229.057] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 229.057] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 229.057] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 229.057] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 229.057] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 229.057] (II) intel(0): EDID for output DP1 [ 229.057] (II) intel(0): Output VGA1 connected [ 229.057] (II) intel(0): Output HDMI1 connected [ 229.058] (II) intel(0): Output DP1 disconnected [ 229.058] (II) intel(0): Using exact sizes for initial modes [ 229.058] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 229.058] (II) intel(0): Output HDMI1 using initial mode 1024x768 [ 229.058] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 229.058] (II) intel(0): Kernel page flipping support detected, enabling [ 229.058] (==) intel(0): DPI set to (96, 96) [ 229.058] (II) Loading sub module "fb" [ 229.058] (II) LoadModule: "fb" [ 229.058] (II) Loading /usr/lib/xorg/modules/libfb.so [ 229.058] (II) Module fb: vendor="X.Org Foundation" [ 229.058] compiled for 1.16.4, module version = 1.0.0 [ 229.058] ABI class: X.Org ANSI C Emulation, version 0.4 [ 229.058] (II) Loading sub module "dri2" [ 229.058] (II) LoadModule: "dri2" [ 229.058] (II) Module "dri2" already built-in [ 229.058] (II) UnloadModule: "modesetting" [ 229.059] (II) Unloading modesetting [ 229.059] (II) UnloadModule: "fbdev" [ 229.059] (II) Unloading fbdev [ 229.059] (II) UnloadSubModule: "fbdevhw" [ 229.059] (II) Unloading fbdevhw [ 229.059] (II) UnloadModule: "vesa" [ 229.059] (II) Unloading vesa [ 229.059] (==) Depth 24 pixmap format is 32 bpp [ 229.059] (II) intel(0): [DRI2] Setup complete [ 229.059] (II) intel(0): [DRI2] DRI driver: i965 [ 229.059] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled [ 229.078] (II) UXA(0): Driver registered support for the following operations: [ 229.078] (II) solid [ 229.078] (II) copy [ 229.078] (II) composite (RENDER acceleration) [ 229.078] (II) put_image [ 229.078] (II) get_image [ 229.078] (==) intel(0): Backing store enabled [ 229.078] (==) intel(0): Silken mouse enabled [ 229.078] (II) intel(0): Initializing HW Cursor [ 229.078] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 229.125] (==) intel(0): DPMS enabled [ 229.125] (==) intel(0): Intel XvMC decoder enabled [ 229.125] (II) intel(0): Set up textured video [ 229.125] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 229.125] (II) intel(0): direct rendering: DRI2 Enabled [ 229.125] (==) intel(0): hotplug detection: "enabled" [ 229.229] (--) RandR disabled [ 229.241] (II) SELinux: Disabled on system [ 229.247] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 229.247] (II) AIGLX: enabled GLX_ARB_create_context [ 229.247] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 229.247] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 229.247] (II) AIGLX: enabled GLX_INTEL_swap_event [ 229.247] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 229.247] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 229.247] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 229.247] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 229.247] (II) AIGLX: Loaded and initialized i965 [ 229.247] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 229.248] (II) intel(0): Setting screen physical size to 270 x 203 [ 229.287] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 229.287] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 229.287] (II) LoadModule: "evdev" [ 229.288] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 229.288] (II) Module evdev: vendor="X.Org Foundation" [ 229.288] compiled for 1.16.0, module version = 2.9.0 [ 229.288] Module class: X.Org XInput Driver [ 229.288] ABI class: X.Org XInput driver, version 21.0 [ 229.288] (II) Using input driver 'evdev' for 'Power Button' [ 229.288] (**) Power Button: always reports core events [ 229.288] (**) evdev: Power Button: Device: "/dev/input/event1" [ 229.288] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 229.288] (--) evdev: Power Button: Found keys [ 229.288] (II) evdev: Power Button: Configuring as keyboard [ 229.288] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 229.288] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 229.288] (**) Option "xkb_rules" "evdev" [ 229.288] (**) Option "xkb_model" "pc105" [ 229.289] (**) Option "xkb_layout" "us" [ 229.290] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [ 229.290] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 229.290] (II) Using input driver 'evdev' for 'Video Bus' [ 229.290] (**) Video Bus: always reports core events [ 229.290] (**) evdev: Video Bus: Device: "/dev/input/event2" [ 229.290] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 229.290] (--) evdev: Video Bus: Found keys [ 229.290] (II) evdev: Video Bus: Configuring as keyboard [ 229.290] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2" [ 229.290] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 229.290] (**) Option "xkb_rules" "evdev" [ 229.290] (**) Option "xkb_model" "pc105" [ 229.290] (**) Option "xkb_layout" "us" [ 229.291] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 229.291] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 229.291] (II) Using input driver 'evdev' for 'Power Button' [ 229.291] (**) Power Button: always reports core events [ 229.291] (**) evdev: Power Button: Device: "/dev/input/event0" [ 229.291] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 229.291] (--) evdev: Power Button: Found keys [ 229.291] (II) evdev: Power Button: Configuring as keyboard [ 229.291] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 229.291] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 229.291] (**) Option "xkb_rules" "evdev" [ 229.291] (**) Option "xkb_model" "pc105" [ 229.291] (**) Option "xkb_layout" "us" [ 229.293] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event4) [ 229.293] (II) No input driver specified, ignoring this device. [ 229.293] (II) This device may have been added with another device file. [ 229.293] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5) [ 229.293] (II) No input driver specified, ignoring this device. [ 229.293] (II) This device may have been added with another device file. [ 229.294] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event6) [ 229.294] (II) No input driver specified, ignoring this device. [ 229.294] (II) This device may have been added with another device file. [ 229.295] (II) config/udev: Adding input device Chicony USB Keyboard (/dev/input/event7) [ 229.295] (**) Chicony USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 229.295] (II) Using input driver 'evdev' for 'Chicony USB Keyboard' [ 229.295] (**) Chicony USB Keyboard: always reports core events [ 229.295] (**) evdev: Chicony USB Keyboard: Device: "/dev/input/event7" [ 229.295] (--) evdev: Chicony USB Keyboard: Vendor 0x4f2 Product 0x111 [ 229.295] (--) evdev: Chicony USB Keyboard: Found keys [ 229.295] (II) evdev: Chicony USB Keyboard: Configuring as keyboard [ 229.295] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1.1/1-7.1.1:1.0/0003:04F2:0111.0001/input/input10/event7" [ 229.295] (II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD, id 9) [ 229.295] (**) Option "xkb_rules" "evdev" [ 229.295] (**) Option "xkb_model" "pc105" [ 229.295] (**) Option "xkb_layout" "us" [ 229.297] (II) config/udev: Adding input device Chicony USB Keyboard (/dev/input/event8) [ 229.297] (**) Chicony USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 229.297] (II) Using input driver 'evdev' for 'Chicony USB Keyboard' [ 229.297] (**) Chicony USB Keyboard: always reports core events [ 229.297] (**) evdev: Chicony USB Keyboard: Device: "/dev/input/event8" [ 229.297] (--) evdev: Chicony USB Keyboard: Vendor 0x4f2 Product 0x111 [ 229.297] (--) evdev: Chicony USB Keyboard: Found keys [ 229.297] (II) evdev: Chicony USB Keyboard: Configuring as keyboard [ 229.297] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1.1/1-7.1.1:1.1/0003:04F2:0111.0002/input/input11/event8" [ 229.297] (II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD, id 10) [ 229.297] (**) Option "xkb_rules" "evdev" [ 229.297] (**) Option "xkb_model" "pc105" [ 229.297] (**) Option "xkb_layout" "us" [ 229.298] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event9) [ 229.298] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 229.298] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 229.298] (**) Logitech USB Optical Mouse: always reports core events [ 229.298] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event9" [ 229.298] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a [ 229.298] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons [ 229.298] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 229.298] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 229.298] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 229.298] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 229.298] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 229.298] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 229.299] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 229.299] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1.2/1-7.1.2:1.0/0003:046D:C05A.0003/input/input12/event9" [ 229.299] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11) [ 229.299] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 229.299] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 229.299] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 229.299] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 229.299] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 229.300] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 229.300] (II) No input driver specified, ignoring this device. [ 229.300] (II) This device may have been added with another device file. [ 229.301] (II) config/udev: Adding input device PC Speaker (/dev/input/event3) [ 229.301] (II) No input driver specified, ignoring this device. [ 229.301] (II) This device may have been added with another device file. [ 231.508] (II) AIGLX: Suspending AIGLX clients for VT switch [ 232.562] (II) AIGLX: Resuming AIGLX clients after VT switch [ 232.836] (II) intel(0): EDID vendor "DEL", prod id 40979 [ 232.836] (II) intel(0): Using EDID range info for horizontal sync [ 232.836] (II) intel(0): Using EDID range info for vertical refresh [ 232.836] (II) intel(0): Printing DDC gathered Modelines: [ 232.836] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP) [ 232.836] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 232.836] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 232.836] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 232.836] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 232.836] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 232.836] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 233.472] (II) intel(0): EDID vendor "DEL", prod id 40979 [ 233.472] (II) intel(0): Using hsync ranges from config file [ 233.472] (II) intel(0): Using vrefresh ranges from config file [ 233.472] (II) intel(0): Printing DDC gathered Modelines: [ 233.472] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP) [ 233.472] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 233.472] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 233.472] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 233.472] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 233.472] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 233.472] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 233.976] (II) intel(0): EDID vendor "DEL", prod id 40979 [ 233.976] (II) intel(0): Using hsync ranges from config file [ 233.976] (II) intel(0): Using vrefresh ranges from config file [ 233.976] (II) intel(0): Printing DDC gathered Modelines: [ 233.976] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP) [ 233.976] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 233.976] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 233.976] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 233.976] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 233.976] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 233.976] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 234.452] (II) AIGLX: Suspending AIGLX clients for VT switch [ 234.547] (II) intel(0): Allocated new frame buffer 1920x1848 stride 7680, tiled [ 234.547] (EE) intel(0): failed to set mode: Permission denied [ 235.093] (II) intel(0): Allocated new frame buffer 1920x1848 stride 7680, tiled [ 235.093] (EE) intel(0): failed to set mode: Permission denied [ 237.189] (II) AIGLX: Resuming AIGLX clients after VT switch [ 237.444] (II) intel(0): EDID vendor "DEL", prod id 40979 [ 237.444] (II) intel(0): Using hsync ranges from config file [ 237.444] (II) intel(0): Using vrefresh ranges from config file [ 237.444] (II) intel(0): Printing DDC gathered Modelines: [ 237.444] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP) [ 237.444] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 237.444] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 237.444] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 237.444] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 237.444] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 237.444] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 252.652] (II) AIGLX: Suspending AIGLX clients for VT switch
delme2.gz
Description: application/gzip
