On Wed, Sep 28, 2016 at 06:15:28PM +0530, Srinivas Ramana wrote:
> If the bootloader uses the long descriptor format and jumps to
> kernel decompressor code, TTBCR may not be in a right state.
> Before enabling the MMU, it is required to clear the TTBCR.PD0
> field to use TTBR0 for translation table walks.
>
> The commit dbece45894d3a ("ARM: 7501/1: decompressor:
> reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but
> doesn't consider all the bits for the size of TTBCR.N.
>
> Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to
> indicate the use of TTBR0 and the correct base address width.
>
> Fixes: dbece45894d3 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7
> cores")
> Acked-by: Robin Murphy <robin.mur...@arm.com>
> Signed-off-by: Srinivas Ramana <sram...@codeaurora.org>
Please submit to the patch system, thanks.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
