[PATCH/RFT v2 17/17] ARM: dts: da850: add usb device node

[ahaslam]

From: Axel Haslam <ahas...@baylibre.com>

This adds the usb (ohci) device node for the da850 soc.
Also it enables it for the lcdk board

Signed-off-by: Axel Haslam <ahas...@baylibre.com>
---
 arch/arm/boot/dts/da850-lcdk.dts | 8 ++++++++
 arch/arm/boot/dts/da850.dtsi     | 8 ++++++++
 2 files changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 7b8ab21..fa91339 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -86,6 +86,14 @@
        };
 };
 
+&usb_phy {
+       status = "okay";
+};
+
+&usb {
+       status = "okay";
+};
+
 &serial2 {
        pinctrl-names = "default";
        pinctrl-0 = <&serial2_rxtx_pins>;
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 33fcdce..ec2cec3 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -381,6 +381,14 @@
                        #phy-cells = <1>;
                        status = "disabled";
                };
+               usb: usb@0225000 {
+                       compatible = "ti,da830-ohci";
+                       reg = <0x225000 0x1000>;
+                       interrupts = <59>;
+                       phys = <&usb_phy 1>;
+                       phy-names = "usb-phy";
+                       status = "disabled";
+               };
                gpio: gpio@226000 {
                        compatible = "ti,dm6441-gpio";
                        gpio-controller;
-- 
1.9.1